After 7.0.2 long delay for menù showing up after restart

Good morning , after upgrading to 7.0.2 my ATV 3 restart with only family sharing and configuration menù....i think it was a fault on the fw upgrade so i reset to default configuration.
after restart everythings goes well and i restart configuring ATV but if i restart from the menù my ATV next boot again comes only family sharing and configuration...i think it was a fault in the 7.0.2 because if you also try to search for fw upgrade again i have error saying it was not possible to connect to the server...so i start thinking that after boot wireless interface is not ready...i left on ATV for about 5 minutes and magically all the menù appear...
before 7.0.2 there is no such problem...anyone experience the same ?
please let me know because i don't want to reconfigure the whole ATV to discover i need to hardware initialize again to try to solve the problem...

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Similar Messages

Long delay for playback after moving a clip in timeline in Premiere CS6

Whenever I move a clip in the timeline I have to wait a really long time for the image to show up in the preview monitor after pressing play. Audio starts ok but I see a black screen for a long time (varies from aprox. 2 to 30 seconds).
This is a bit annoying as it disrupts the editing flow and really slows down the workflow.
I'm cutting a Red Epic sequence on an 2011 iMac with 16 gb of ram. I never got this behaviour in CS5.
Any suggestions?

We need to know more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Also, to isolate the problem, try using some other media, not the Epic footage.

Long delay for login list to appear Mavericks Server

I am currently looking at an issue where the login list of users takes up to 30 seconds to appear after a user has logged out of their account. This might not sound like much time, but is a long time for the user waiting to get the list. Any ideas on where to look for a remedy, or what tests might be applied would be appreciated.
Clients are all 2012 - 2013 iMacs and Macbook Airs - About 140 nodes
Server is a new Mid 2012 Mac Pro Server running Mavericks server with all updates. Open Directory network.
Network is Gigabit with a 3com 4500 Layer 3 switch and Gig Lan switches.
Message was edited by: Don Roedl - To edit out my personal machine, which is not relevant to the issue.

Hello Don
We have experienced the same issue.
Are all clients 10.9 clients or 10.8 ?
If 10.8 home directories should be served as AFP protocol. If 10.9 clients then it is SMB ( SMB 2 ) OS X 10.10 Yosemite has moved from SMB2 to SMB3.
Make sure in clients that you have "Show fast user switching" ticked off.
Otherwise, the user logs out but the client machine will almost never unmount the previous user home directory shared point, the next user will not be able to log in.
In Server.app under File Sharing you see idle users even after successful log out. It was our case.
Some people on the internet went to the terminal to add precious terminal commands to force kill idle users after a "x" hours for instance.
http://krypted.com/mac-security/missing-server-app-settings-for-afp/
10.8 and 10.9 have differences.
I suggest you read http://www.amazon.com/Apple-Pro-Training-Essentials-Supporting-ebook/dp/B00HJUBR Q0
Even if you have lots of experience with OS X.

Long delay for authentication dialog 10.6.x to Windows 2008 SBS

I am encountering a very long delay (30-45 seconds) for the authentication dialog when connecting from Mac OS X 10.6.2 clients to a Windows 2008 Small Business Server.
We are connecting using the "Connect to Server" dialog, using smb://<server host name> and smb://<server IP address> as the URIs. Once the authentication dialog eventually comes up the users can log in successfully and access the shares on the server normally and at normal speed.
I see this entry show up in the system.log when a smb connection is started:
/System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent ### * process ### exceeded 500 log message per second limit - remaining messages this second discarded *
I would like to see the NetAuthAgent log that is referred to in the error but I haven't been able to determine where this log resides or it I need to set NetAuthAgent or the smb client into a debug mode to capture logging.
I have tried many of the usual fixes on the server side when it comes to Mac compatibility including:
•Disabled SMB signing
•Setting these registry values to 0:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Enablesecurity signature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Requiresecurit ysignature
This was asked last October with no resolution:
http://discussions.apple.com/thread.jspa?messageID=9804807
If anyone has encountered this issue and discovered a solution please help. Thanks in advance!

I'm having an issue with 10.6.x lately and Windows 2003.
Random disconnects and the same log errors about the message limit.
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/VideoSAN', from '//ACC;Phillip.Roncoroni@acc-office/VideoSAN', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/ACC_docs', from '//ACC;Phillip.Roncoroni@acc-office/ACC_docs', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Drop Box', from '//ACC;Phillip.Roncoroni@acc-office/Drop%20Box', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 3 filesystem(s) with problem(s)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Photos', from '//ACC;Phillip.Roncoroni@acc-office/Photos', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 1 filesystem(s) with problem(s)
Also looking for a resolution.

Need long delay for buffered CO task

I want to create a buffered CO task, when triggered, delay 5 min before output pulse. Is this possible?
PXIe-6341, Win7, LabVIEW 2013.
The channel property: initial delay doesn't work for buffered CO task.
The trigger property: start.delay not supported for the device.
George Zou
http://webspace.webring.com/people/og/gtoolbox

Hey, George
I do have a suggestion for you. Here's some code that will delay a set number of pulses of an input signal. If you input a 1kHz signal, then waiting 300,000 ticks would correspond to 5 minutes. You may have to use another counter to generate a pulse train signal that acts as the 1 kHz input, but this code is how you can do they delay. After the 300,000 ticks are counted, a pulse of a specified width is outputted by the counter which you could use as a start trigger for another task.

Long delay for add-in saving emails with Cached Exchange Mode off for one user's Exchange account

Hello,
Before I start, I have asked questions in the Outlook Developer forum and was referred here as it appears to be an Exchange Server problem that I am experiencing, not related to Outlook or the add-in that I am developing.
I am an Outlook developer with an Outlook add-in that adds MAPI properties to emails and then calls MailItem.Save to save the changes.
The add-in uses the Internet Message ID MAPI property for some functionality, so I have to turn turn Cached Exchange Mode off to ensure that my functionality works correctly for the Sent Items folder (otherwise no Message ID property exists).
This process works fine for 99% of users.
I have one particular user that has a huge delay (~1 minute) when MailItem.Save is called for items in his account. He is using an Exchange account. If I switch Cached Exchange Mode on there is no longer a delay (as no communication with Exchange Server). The
user does not have an excessively large Mailbox.
The problem is not caused by the network or communication path to the server as the problem exists on any computer where other users are ok.
I'm sure the problem is not caused by my add-in, but likely a problem with the user's Exchange account. Does anyone have any suggestions on how I may be able to resolve the delay and what might be causing it?
Thanks
Glen Thomas

Hello,
Before I start, I have asked questions in the Outlook Developer forum and was referred here as it appears to be an Exchange Server problem that I am experiencing, not related to Outlook or the add-in that I am developing.
I am an Outlook developer with an Outlook add-in that adds MAPI properties to emails and then calls MailItem.Save to save the changes.
The add-in uses the Internet Message ID MAPI property for some functionality, so I have to turn turn Cached Exchange Mode off to ensure that my functionality works correctly for the Sent Items folder (otherwise no Message ID property exists).
This process works fine for 99% of users.
I have one particular user that has a huge delay (~1 minute) when MailItem.Save is called for items in his account. He is using an Exchange account. If I switch Cached Exchange Mode on there is no longer a delay (as no communication with Exchange Server). The
user does not have an excessively large Mailbox.
The problem is not caused by the network or communication path to the server as the problem exists on any computer where other users are ok.
I'm sure the problem is not caused by my add-in, but likely a problem with the user's Exchange account. Does anyone have any suggestions on how I may be able to resolve the delay and what might be causing it?
Thanks
Glen Thomas

Long delay for ManagedEventWatcher __InstanceCreationEvent query as number of user sessions increases

We have a Windows service that monitors for process start events and sends notifications to client applications.
We have discovered that the delay between when a process starts and when our EventArrivedEventHandler is called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
The delays are not consistent. Even with 100 sessions some observed delays are short but most are too long and the maximum observed delay grows with the number of sessions.
Here is one example of the delay we are seeing.
A client application wrote its first log record to its log file at 11:05:34.076. Our EventArrivedEventHandler did not get notified of the process start event for the client application until 18 seconds later (at 11:05:52.188 ).
We need the delay to be less than 5 seconds to be tolerable and would like the delay to be less than 3 seconds if possible.
Is there something we can do to reduce the delay? Below are the details of our use of WMI.
We are using an instance of class WqlEventQuery to represent a WMI event query in WQL format.
We are constructing an instance of ManagementEventWatcher to consume events asynchronously.
Below is how we are instantiating and running the query. Variable m_PollingIntervalInMilliseconds is set to 1000 by default.
                WqlEventQuery query = new WqlEventQuery("__InstanceCreationEvent", new TimeSpan(0, 0, 0, 0, m_PollingIntervalInMilliseconds), "TargetInstance isa \"Win32_Process\"");
                m_ManagementEventWatcher = new ManagementEventWatcher(query);
                m_ManagementEventWatcher.EventArrived += new EventArrivedEventHandler(managementEventWatcher_EventArrived);
                m_ManagementEventWatcher.Start();
Our Windows service is not the only user of WMI services on the server. I do not know if there is contention with other users of WMI services or if there is something about the way we are consuming WMI services that is inefficient.

Hello RossAtWFMC,
It seems that the services are working with a complex environment, and currently, we do not have such an environment which could reproduce this issue you described. Anyway, I would like to share whatever I found and some suggestions about this issue:
>> called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
This seems to show that the issue is related with the number of user sessions, it may be that when with lots of user sessions, there are something additional delay the event to be fired. As you mentions, there are other services on that server machine, if
possible, you could make a test to run your WIM service only to see if it is still delayed.
>> Is there something we can do to reduce the delay?
I suggest that you could check this blog below which provide a way to debug with the .NET course code:
http://blogs.msdn.com/b/dotnet/archive/2014/02/24/a-new-look-for-net-reference-source.aspx
So that you could know which method inside costs most time.
From your provided code, it is not very clear if you use multi threads in your service, if not and your event handler is short, you could have a try with it, and there is a discussion about this topic:
https://social.msdn.microsoft.com/Forums/en-US/13f30e33-7f61-498e-a91a-ef982a63453c/event-handling-in-multithreaded-apps?forum=netfxbcl
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Long delay for Flash video to appear

This is the second of a series of related questions about
Flash video in DW.
When I embed an flv into a DW page using "insert flash
video", as you'd expect, it plays immediately when previewing it
locally.
When I view it live, i.e. online, however, it takes sometimes
as long as 8 second before the player appears on the page.
Once it appears, it plays fine. But the delay is
unacceptable.
Any ideas?
Thanks.
david

Must be a fairly large file. Try sizing your video down to
320 x 240 px or
shortening the running time to reduce file size.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"tenorocity" <[email protected]> wrote in
message
news:fge6fg$85c$[email protected]..
> This is the second of a series of related questions
about Flash video in
DW.
>
> When I embed an flv into a DW page using "insert flash
video", as you'd
> expect, it plays immediately when previewing it locally.
>
> When I view it live, i.e. online, however, it takes
sometimes as long as
8
> second before the player appears on the page.
>
> Once it appears, it plays fine. But the delay is
unacceptable.
>
> Any ideas?
>
> Thanks.
>
> david
>
>
>

Long delays for all functions

As of recently my computer has been functioning extremely slowly. It started off with the internet pages loading slowly then it was moving on to every other task that was delayed, was slow to process, or the spinning wheel constantly shows up. Everything that is delayed is from wither opening or closing internet programs, other non internet windows, down to typing into fields. Even as I type this its painful watching the letters type 1 at a time or stops all togehter. I have tried many things, we backed up the computer, we did all the cleaning techniques, downloaded programs to help figure out problems, verified and confirmed we have plenty of memory & storage, deleted unused files, we did diagnostic tests which came back with no issues, we tried re-configuring our WiFi connection. I have a MacBook Pro - Processor: 2.5 GHz Intel Core i5 2012 software is OS X 10.8.5. I don't know what else to do or what the issue is. Please help

Run this and post the results here so you know more about your computer
EtreCheck
Also, this is the Mac Pro desktop forum

Long time for execution for scheduled CIF background jobs

Hi,
we hv schedlued CIF background job to be run daily around 10.30 PST.
there is large variation for the time required for execution of this job.
on 26 Dec, it took approx 48000 seconds while regular average is 120 seconds only.
today, despite past of 6000 seconds, the job is still in ACTIVE stage.
can anyone know why such long delay for such jobs?
how can i reduce its execution time (as one of case in a week)?
rgds/Jay

Hi Jay,
A few obvious things to look for:
1. Multiple CIF activation jobs running at the same time
2. Large change in the master data, eg new plant, new Material Masters, new customers, etc etc.
3. Conflicts with other non CIF programs that may be going after the same data
4. Communication degradation between the OLTP and SCM clients
Normally you refer such questions to someone on your Basis team, or perhaps your DBA. They can turn on tracing tools that can track the changes in your environment that may be contributing to the changes in run time.
Regards,
DB49

Why Does IT Take SOOOOO Long To Get New Shows And Podcast Updates!!!!!

Why Does IT Take SOOOOO Long To Get New Shows And Podcast Updates!!!!! It seems to me that it takes and unusually long time for TV shows to be uploaded to itunes and it takes FOREVER (VH1) to get Podcast updates. Also I notice that Vh1's Best Week Ever is a hit or miss deal. Some weeks it's on iTunes and some weeks it's not......why?
Paul

The iTunes store simply provides a link to the originating podcast server.
When the podcast owner puts a new episode up, it is available.

Long delay after issuing commands at prompt

This has only begun recently, so I assume I've done something wrong but I havn't tinkered that much, so I can't really retrace my steps.
At the prompt when I type in certain commands there is a very long delay (10-30 seconds) to load certain things. startx is one of them, emacs and firefox are others.
There isn't really anything else to say, there isn't any error messages or anything so I really have no idea how to locate the problem. It also occurs outside of a prompt, for instance when using xbindkeys.
After they've been loaded once they load quickly but it's really annoying after I reboot.
Any clues?

I find that there is a small delay normally with those programs, I'm not sure if that's what you mean.
Could you post the contents of /var/log/errors.log and the output of dmesg. Also you might check the CPU
usage when they open.

Long delay after F10 "full motion" stop

I am new to Captivate and am recording a movie in Word where
I need user to see continuous movement of mouse cursor as I point
to different things in the Word document. I am also using
continuous audio while recording to movie. The problem is that when
I hit the F10 key to stop the full motion animation I get a delay
of about 20 seconds before the movie ends, even though I quickly
hit the End key after hitting the F10 key. The full motion movie
created is about 9MB and about 4 minutes long but with a long delay
of at least 20 seconds with no action at the end of the movie. It's
almost like my hardware is working to stop the animation and end
the movie but it is taking 20 seconds to stop the full motion
recording and ending the movie. Has anyone else experienced this
problem? I am using a laptop with a Celeron M 1.5 GHZ computer. Is
my hardware the problem?
Adobe technical support has had me reload the Captivate
program several times with no luck.
Any suggestions?

Hi again Jeff
As I indicated in my earlier post, full motion in Captivate
is brief. For example, say you are recording WordPad (this example
is taken from the official Captivate training curriculum).
You record dragging across a sentence to select it. This is
just a few seconds long and ends up as full motion. You then click
the color pallete to change the color. This results in a static
slide. You choose the color. Another static slide. You step off to
show the color change. Another static slide. Now you scroll the
document to view the text at the bottom. Another full motion slide
as you drag the thumb of the scroll bar. Then you select multiple
lines. Another full motion slide as you select the lines. Then you
click the icon to apply bullets. Static slide. Then step off the
selected text to reveal the bulleted text with no highlight. A
final static slide.
With Captivate, it is the combination of static and full
motion slides that provides the illusion of fluid movement.
Hope this helps... Rick

Long delay after switching application

I have a project which has about 1000 clips. Every time I switch to another application and then back to Premiere, it takes a very long time before Premiere can respond to any action. Initially, I thought it's b/c memory. So I added more RAM and see about 50% of RAM free. However, this does not help.
One day I deleted a clip in Explorer and switching back to Premiere. After the long delay, it pops up a dialog asking me where is the clip.
So could the long delay is from scanning for clip changes? If so, is there any way to disable it?
thanks!

Do you mean:
1. The delay is unrelated to the scanning of clips
or
2. It's not possible to stop the scanning?
The project file is only 40MB. I've had 100MB or even larger project file before and never see such long delay. Could you please give me some pointer on how to reduce this delay (right now about 30 seconds)?
Thanks!

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

After 7.0.2 long delay for menù showing up after restart

Similar Messages

Maybe you are looking for