Long delay after F10 "full motion" stop

I am new to Captivate and am recording a movie in Word where
I need user to see continuous movement of mouse cursor as I point
to different things in the Word document. I am also using
continuous audio while recording to movie. The problem is that when
I hit the F10 key to stop the full motion animation I get a delay
of about 20 seconds before the movie ends, even though I quickly
hit the End key after hitting the F10 key. The full motion movie
created is about 9MB and about 4 minutes long but with a long delay
of at least 20 seconds with no action at the end of the movie. It's
almost like my hardware is working to stop the animation and end
the movie but it is taking 20 seconds to stop the full motion
recording and ending the movie. Has anyone else experienced this
problem? I am using a laptop with a Celeron M 1.5 GHZ computer. Is
my hardware the problem?
Adobe technical support has had me reload the Captivate
program several times with no luck.
Any suggestions?

Hi again Jeff
As I indicated in my earlier post, full motion in Captivate
is brief. For example, say you are recording WordPad (this example
is taken from the official Captivate training curriculum).
You record dragging across a sentence to select it. This is
just a few seconds long and ends up as full motion. You then click
the color pallete to change the color. This results in a static
slide. You choose the color. Another static slide. You step off to
show the color change. Another static slide. Now you scroll the
document to view the text at the bottom. Another full motion slide
as you drag the thumb of the scroll bar. Then you select multiple
lines. Another full motion slide as you select the lines. Then you
click the icon to apply bullets. Static slide. Then step off the
selected text to reveal the bulleted text with no highlight. A
final static slide.
With Captivate, it is the combination of static and full
motion slides that provides the illusion of fluid movement.
Hope this helps... Rick

Similar Messages

Long delay after switching application

I have a project which has about 1000 clips. Every time I switch to another application and then back to Premiere, it takes a very long time before Premiere can respond to any action. Initially, I thought it's b/c memory. So I added more RAM and see about 50% of RAM free. However, this does not help.
One day I deleted a clip in Explorer and switching back to Premiere. After the long delay, it pops up a dialog asking me where is the clip.
So could the long delay is from scanning for clip changes? If so, is there any way to disable it?
thanks!

Do you mean:
1. The delay is unrelated to the scanning of clips
or
2. It's not possible to stop the scanning?
The project file is only 40MB. I've had 100MB or even larger project file before and never see such long delay. Could you please give me some pointer on how to reduce this delay (right now about 30 seconds)?
Thanks!

Long delay after issuing commands at prompt

This has only begun recently, so I assume I've done something wrong but I havn't tinkered that much, so I can't really retrace my steps.
At the prompt when I type in certain commands there is a very long delay (10-30 seconds) to load certain things. startx is one of them, emacs and firefox are others.
There isn't really anything else to say, there isn't any error messages or anything so I really have no idea how to locate the problem. It also occurs outside of a prompt, for instance when using xbindkeys.
After they've been loaded once they load quickly but it's really annoying after I reboot.
Any clues?

I find that there is a small delay normally with those programs, I'm not sure if that's what you mean.
Could you post the contents of /var/log/errors.log and the output of dmesg. Also you might check the CPU
usage when they open.

External hard drive no longer found after becoming full from time machine, External hard drive no longer found after becoming full from time machine

Hi, I have been using an external hard drive as a backup for my Mac using Time Machine. I was under the impression that once the backup drive became full, it would start to delete previous versions of the backup. However, instead of doing that, it has just stopped working and I now cannot access the hard drive via a Mac or a PC. On the PC, it does at least show up in that it will allow me to disconnect it safely but I cannot do anything else with it.
I am now looking to reformat it, and start again from scratch - but can't do this as it doesn't show up anywhere. Does anyone have any advice about how I can get this working again?
Thanks.

Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

[Gnome 3] Long delay after login

Hi guys,
I experience a delay of about 15 seconds before the system begins to start the gnome-shell after I had logged in through GDM. During that time the system doesn't seem to work. At least the hard drive is not.
Can you confirm that behaviour?
Regards

The dbus subsystem isn't starting. You might want to add that to your DAEMONS to start on boot or check to see why it isn't starting.

Long delay after logging in - WXP & M200

Hi,
When my M200 is running on batteries, most of the times I log in to the system from a cold start I have to wait for about two minutes after logging in. Opening the Task Manager learns that the CPU is idle, harddisk is idle, only few of the processes loaded; the system just seems to be waiting for something. Other programs than Task Manager cannot be opened.
Around the time the delay happens, in the System section of the Event log the following error messages are recorded:
. "Silent Running: Stress test transition: Dynamic -> Performance 3D", service "nv", event_ID: 106
. "Silent Running: Stress test transition: Performance 3D -> LowPower 3D", service "nv", event_ID: 106
nv seems to be nVidia, but reinstalling the display driver did not change a bit. When the system is running on AC power, the problem never occured.
What is happening here & how do I solve it?
Thanks for any good suggestion.
Pieter.

Hi,
in my opinion this relates to the power savings because the graphic chip is a Nvidia GeForce FX Go 5200 for notebooks. The chip is managed by the power savings and could be set to different modes.
I search in the internet about these error messages and foud something. All opinion I had read said that this only a event log entry which doesn't matter. There are some more similar expressions for other events.
Nice holidays and Xmas
Bye Rudi

BB Balance - long delay after switch to/unlock business content after Upgrade to 10.2

Dear All,
we're using Z10 with BES10.1.3, everything run smoothly but we've one issue:
since we have upgraded Z10 device software from 10.1 to 10.2.0.1791 there is a delay of about 12-15 seconds each time we unlock device to business content until we see messages in BB-Hub
to explain, business content is locked - we type in password - OK
display switch to empty hub - then we have to wait 12-15sec. until messages will appear in hub
We've tried out different things, we've wiped device, we've deleted business content and regarding email account, activated device new on BES10, wait 2 days that basic syncronisation will be done and same issue.
Can you help us please, we don't know what we should try out any more...Blackberry Hub and the fast check of new incoming messages is one of the main features of Z10...thanks in advance.

Thanks for your quick reply, so what should I try out with this device in detail?
Thanks

Long delay after startup before screen brightness, volume buttons work

I just started noticing this in the last few days. After I start up, it will be 4 or 5 minutes before I can adjust the screen brightness or volume using the F keys. Also, I noticed that I can't do a "Force Quit" during this time - either by doing the keystroke or by going to the Apple menu. After this "dead period" is over, if I've enacted any of the aforementioned activities, they will appear on the screen all at once.
I can start and use other applications just fine during this period. It seems like OS X is just not completely done booting up, and that's why I can't get to any of the built-in OS features. I think I would be fine with that if I was still using windows, but I've never had this problem on my mac before. The only things that I've installed in the last few weeks are the Firefox 3 upgrade and (I believe) some pushed updates from Apple - can't remember which apps they were for.
Can someone help me troubleshoot this?

Hi, and a warm welcome to the forums!
How much Free space do you have on what size HD?
Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Or, you can do some of those things another way...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
Then Safe Boot off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

Long delay after a drag and drop to trash

This seems like a new behavior and I haven't changed anything: when I drag something to the trash there seems to be a delay in it actually "Getting in there," however if I right click and then click "Move to Trash" its immediate. Is this the way it should be? I am not using secure delete.

And it does nothing similar when you drop an item on a folder or anything else, only the trash... Geez, that is pretty darn strange. And if you slowly drag and drop it, it does the same? I wonder if resetting your PRAM might be worth a shot.
If you delete or remove the plist from where it is now I would guess that a new one would be created automatically like most preferences. But maybe you should wait for Baltwo on that one. Does force quitting the finder do anything? You might also try starting up in Safe Mode to see if that has any effect. If it does, there's probably some software conflict going on. Good luck, if you get it fixed post back. I'd really like to know what was going on.
Steve

Long delay after selecting print in Mail

Hi,
Installed Snow Leopard over the weekend, however there is a delay when I try to print any email (large or small) from Mail.
I click command and P and the 'File' in the top menu turns blue for around 30 seconds before the print dialogue box finally pops up. I am going to add another 1Gb RAM to my Macbook to see if this addresses this issue. Bear in mind that Mail is the only application open at the time.
Does anyone else have this issue?

Hello Rory:
FWIW, I do not have that problem.
You might try a couple of things.
1. Rebuild the mailbox(s).
2. Delete your printer, restart, and then add it back into your system.
Barry

How to stop a while loop with long delay

Hi everyone,
I am building a simple program for turning on and off a single Bit. The task is to turn ON the Bit for a period length T1, and OFF the Bit for a period length T2. T1 is normally different from T2, and can be controlled by users.
Since T1 and T2 can be variable, they sometimes can be very long.
If I use a Wait function inside a While loop, it needs long delay to be able to Stop the Main program.
The same situation happens when I use Timed loop.
Can anyone suggest me how to do this task?
Thanks a lot.
Message Edited by tatuan on 04-12-2010 12:56 AM

Here's another possibility using OpenG Wait ms:
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

CP 7 Bug? Long delay between preloader and first slide

I am using OSX Mavericks 10.9.2 and recenly created my first project since upgrading to CP 7. My project is 15 slides and contains only audio (mp3) and image files. My preloader is set to 25%. When I upload the published project to my web server and test, there is a fairly long delay after the preloader loads and before the course begins. It last several seconds and appears as if all the elements on the first slide are missing (the only thing that shows is the playbar - I have only the CC button turned on):
Is this a bug with CP 7? I have never experienced anything like this in CP 5.5 and 6.

jon8979 wrote:
During the latter part of the sync, I can open the Music app and scroll down to find the first last Artist with more songs than albums, and that is the one the device is currently working on.
That should have been the "last" Artist, not "first". I would've edited the message, but I guess I'm too late as the option isn't available.

Clearing recent history causes very long delay with message "a script has stopped responding"

When I take option to "Clear Recent History" from tools dropdown, there is a very long delay EVERY TIME, followed by this message:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://browser/content/sanitize.js:136
This happens even when Javascript has been disabled. This problem first appeared just after installing Firefox version 4.0
I can proceed to "Clear Recent History" only by again clicking that option after taking option to stop non responding script.

I have resolved the problem (for now) by uninstalling Firefox 4.0 and reinstalling Firefox 3.6. When 4.1 becomes available I will try 4 again.

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Is there a fix for long "spindle" delays after the 10.6.8 upgrade?

After I downloaded the 10.6.8 upgrade and even the combo pack I get very long delays. Only reverting the system back to 10.6 helps.
Any ideas?

After doing a Software Update, AirPort has been having serious connection issues. It cannot find wireless networks where the *Wireless SSID Broadcast is DISABLED*. My iPhone finds the networks perfectly, every time. I am forced to input the network manually every time through "Join Other Network...", even though the network is saved on the Advanced list in Network Preferences.
*Here are the specs of my MacBook Pro:*
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
*The router I am connecting to is...*
Linksys Compact Wireless-G Broadband Router
Model WRT54GC
Firmware Version: v1.05.7
Mode: Mixed
Wireless Channel: 06
Security: WPA2 Personal
Encryption: AES
Everything is pretty much defaulted to the default settings for the router. I have also another Linksys Router that is having the same problems. These used to work before perfectly BEFORE the MacBook 10.5.8 updates...
*Previous Methods in Trying to Resolve Issue:*
-Deleting AirPort connection in Network Preferences and re-adding it
-Deleting the "com.apple.airport.preferences.plist" file in /Library/Preferences/etc.
I'm at a loss here... any help would be greatly appreciated.

Long delay after F10 "full motion" stop

Similar Messages

Maybe you are looking for