Long delay for add-in saving emails with Cached Exchange Mode off for one user's Exchange account

Hello,
Before I start, I have asked questions in the Outlook Developer forum and was referred here as it appears to be an Exchange Server problem that I am experiencing, not related to Outlook or the add-in that I am developing.
I am an Outlook developer with an Outlook add-in that adds MAPI properties to emails and then calls MailItem.Save to save the changes.
The add-in uses the Internet Message ID MAPI property for some functionality, so I have to turn turn Cached Exchange Mode off to ensure that my functionality works correctly for the Sent Items folder (otherwise no Message ID property exists).
This process works fine for 99% of users.
I have one particular user that has a huge delay (~1 minute) when MailItem.Save is called for items in his account. He is using an Exchange account. If I switch Cached Exchange Mode on there is no longer a delay (as no communication with Exchange Server). The
user does not have an excessively large Mailbox.
The problem is not caused by the network or communication path to the server as the problem exists on any computer where other users are ok.
I'm sure the problem is not caused by my add-in, but likely a problem with the user's Exchange account. Does anyone have any suggestions on how I may be able to resolve the delay and what might be causing it?
Thanks
Glen Thomas

Similar Messages

Mobile account on laptop will no longer connect for one user

I have a set of laptops with user accounts set up on them as mobile accounts. This morning one user stuck in his username and password, and the login panel went away and the "purple stars" came up, but it hung there and didn't continue and log him in. After about 5 minutes he got tired of waiting and hit the power button on the laptop. When it rebooted, the usual login panel offering his name, the local administrator account and "other" was missing his name -- just the admin account and "Other". Then he came to find me...
If I go to "Other..." and ldap is green light, and put in his username and password, it shakes it's head like he doesn't exist. I've tried all of the usual tricks back on the Open Directory server -- turn his account off and back on, change the password save change it back, etc. I have compared the setup with several other users who work just fine, and I can't see anything different. I have even logged in with my account (which is not set up for mobility) and it takes the username and password and refuses after a certain point in the login. When I log in with other mobile accounts, it logs in and gets as far as offering to create a local directory (which I cancel out of.) So it's just this one user's account.
When I log in to the local admin account and run system prefs and go to accounts, his account is there and shown as type "mobile". His directory is there, and an 'ls -l' on it shows that he owns it. I've run the directory utility, and everything looks great -- and I can log on via ldap with the other accounts. If I break ldap connectivity by turning off the airport and unplugging the ethernet cable, the light goes red and then the only option on the login panel is the local admin account, not the lodmin plus his account in local mode.
Anybody know what's broken? Evidently the mobile accounts don't like to be powered off in the middle of a login! Anybody know if there is some lock file somewhere that I needs to be deleted?

Hi @TSimo,
Welcome to the HP Forums!
I wasn't able to find much on a Photosmart 7420, did you perhaps mean Photosmart 7520?
If that is correct, this may just be a case of needing to reconnect the printer to the wireless network again due to the upgraded router and extender
To do this, please restore the network defaults on the printer (press the wrench on the printer's touch screen, select Wireless, then select Restore Network Defaults, should be the last option) and once that completes go back to the same Wireless menu on the printer and run the Wireless Setup Wizard on the printer. This will update the connection on the printer itself.
After this completes you will need to remove the driver and re-add it on the computer. How this is done depends on the operating system, so if you're not sure how to remove the driver and re-add it, please let me know which operating system you use and I will get you some instructions
Hope to hear from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Workflow no longer works for one user

I have a state machine workflow that I built and deployed over a year ago. The workflow has run without issue until a few weeks ago, when one user complained that the workflow wasn't processing his approval.
This user has been an approver since the workflow was first deployed. He was able to successfully approve as recently as last month. I have tested frequently with this user, and the issue is consistent. Once he completes the task he is assigned, the workflow
doesn't seem to see that the task has changed. If any other approver completes the task (including myself) the workflow runs without issue. I even had the user login on a different computer, and he still encountered this issue. I also had him test this workflow
on our staging environment, and on that server he doesn't encounter the issue and the workflow runs successfully, so this issue only occurs on our production environment.
I don't feel there is a problem with the workflow due to the length of time it has worked successfully, and due to the fact that all of the other approvers (there are many) cannot reproduce the issue. My gut tells me it is a permission issue, but I have
verified the user still has owner rights to the site, and that he has not had any name changes or other updates to his AD account. However, this issue is only occurring on production, and I am not aware of any changes made to permissions on this site. Has
anyone else experienced this behavior?

Hi,
According to your description, my understanding is that the workflow cannot work fine when the user completed the tasks.
I recommend to check if the user has permission on the task list the workflow uses.
Open the workflow in SharePoint Designer and check the task list the workflow used in Workflow settings page of the corresponding workflow, then go to the List Permissions of the task list in the browser and click Check Permissions button in the ribbon to
check if the user has permission on the task list.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Possible to retract emails with Mail (Exchange account)?

One of the email accounts I work with is an on an Exchange Server. I know that on a PC you can retract sent email with Exchange, is this possible with Mail?
Thanks

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

Long delay for login list to appear Mavericks Server

I am currently looking at an issue where the login list of users takes up to 30 seconds to appear after a user has logged out of their account. This might not sound like much time, but is a long time for the user waiting to get the list. Any ideas on where to look for a remedy, or what tests might be applied would be appreciated.
Clients are all 2012 - 2013 iMacs and Macbook Airs - About 140 nodes
Server is a new Mid 2012 Mac Pro Server running Mavericks server with all updates. Open Directory network.
Network is Gigabit with a 3com 4500 Layer 3 switch and Gig Lan switches.
Message was edited by: Don Roedl - To edit out my personal machine, which is not relevant to the issue.

Hello Don
We have experienced the same issue.
Are all clients 10.9 clients or 10.8 ?
If 10.8 home directories should be served as AFP protocol. If 10.9 clients then it is SMB ( SMB 2 ) OS X 10.10 Yosemite has moved from SMB2 to SMB3.
Make sure in clients that you have "Show fast user switching" ticked off.
Otherwise, the user logs out but the client machine will almost never unmount the previous user home directory shared point, the next user will not be able to log in.
In Server.app under File Sharing you see idle users even after successful log out. It was our case.
Some people on the internet went to the terminal to add precious terminal commands to force kill idle users after a "x" hours for instance.
http://krypted.com/mac-security/missing-server-app-settings-for-afp/
10.8 and 10.9 have differences.
I suggest you read http://www.amazon.com/Apple-Pro-Training-Essentials-Supporting-ebook/dp/B00HJUBR Q0
Even if you have lots of experience with OS X.

Actionable emails with MS Exchange Server

Using Exchange for e-mail, and my understanding is that we must enable IMAP/POP3 email on our Exchange server to get the BPEL actionable e-mails to work. But my Exchange experts strongly advise against us turning on these types of messages, at least on our main Exchange server. It is a global setting, and apparently one which creates numerous security risks.
Attempting to configure actionable emails with MS Exchange Server as the email system. Does this require enablement of IMAP/POP3 on the Exchange Server to get actionable emails to work? Specifically, for the EmailAccount/IncomingServerSettings within the ns_emails.xml file, what configurations are required when the email system is Exchange Server?
I'm looking to confirm or deny this configuration requirement for MS Exchange Server.
Thanks,
Tim

Try http://www.lavantech.com/smtpmailer
This isnt the right place to market your product. If you've forgotten what this forum is used for, you better ask someone.
You don't have to refer users to your application and asking them to try it. Of course not for free. You will be reported if you continue.

Attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outb

attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I have a question regarding emails being marked as unread when syncing with an exchange account.

I have a question regarding emails being marked as unread when syncing with an exchange account.
In the evening I can see I have 10 unread emails on my exchange account. I leave them unread. The following day, at work, I view and read all my mails from today and yesterday, so that I have NO unread messages. When I then sync my iphone it marks only the mails from today as read but, leaves all the mails from yesterday marked unread. Only solution so far is for me to go through the mails on my iphone one at a time for them to be marked as read.
My mail account is set to sync 1 month back.
I have had this problem on all the iphones I have had.
I currently have an iPhone 5 and my software is up to date.
What am I doing wrong?

Hey kabsl,
Thanks for the post.
What type of email account is attached to your BlackBerry Z10? (POP3, IMAP, Exchange). Also have you tried removing and re-adding the email account to test?
Is this email account only setup on one computer or several computer?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I want to add transaction code for one user.

Hi abapers,
My requirement is;
I want to add transaction code for one user.
EX: zsdf to kanne.
Can any body tell me the procedure step by step.
With regards,

If you want to give authorisation to an user for a particular tcode, you need to first include the transaction code in an authorisation Role and then assign the authorisation role to the user id in the transaction code SUIM.
A Basis guy will be able to help you to do this and anyway this is not the job of an ABAPer.
Hope this helps you.
Reward if this helps you

HT4539 "this device is no longer eligible for creating a free icloud account" what that mean and how to resolve this problem

"this device is no longer eligible for creating a free icloud account" what that mean and how to resolve this problem

Guess we're stucked and live with it. I hate this policy of limiting accounts to use on a device but the good thing is I just logged in using my account and asked my daughter what are the apps and music she wanted to download on the device. After we load everything she needs, I just deleted my account in the device and disassociated it from my iCloud account. It's still works as intended but the only caveat is she cannot use the find my ipad application.

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

Device is no longer eligible for creating a free icloud account how to create on iphone, How do I create an apple ID if it says " No longer eligible for creating a free iCloud account "? It says Account limit reached?

device is no longer eligible for creating a free icloud account how to create on iphone, How do I create an apple ID if it says " No longer eligible for creating a free iCloud account "? It says Account limit reached?
Kindly advice.
Thanks
Mahfooz

I had the same issue on my iPod touch 4th Gen, I noticed the issue after updating the device to 6.1.5. I dont know what device or IOS your running but if it is similar then I think this ma be the cause. My solution to you is to create a free apple ID on their website, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId. Hope this helped and good luck!

I got this iPad as an open box deal on bestbuy, it says the device is no longer eligible for creating a free iCloud account. How do I fix this?

I got this iPad as an open box deal on bestbuy, it says the device is no longer eligible for creating a free iCloud account. How do I fix this?

You cannot fix it. Nobody can. There is a limit to how many free iCloud accounts that can be created on one iOS device and the limit is three. Obviously, this device reached that limit which means that this open box iPad was most likely owned by someone else or customers that used theiPad in the store got cute and created iCloud accounts on it and then deleted them.
So that's why deggie is recommending that you return the iPad to Best Buy and get your money back. You bought a device that should have never been sold to you.

Can't create apple id this device is no longer eligible FOR CREATING A FREE ICLOUD ACCOUNT

I am not able to create a new i cloud apple id apple phone showing this error (can't create apple id this device is no longer eligible FOR CREATING A FREE ICLOUD ACCOUNT). So i requested please help us.
Thanks
Sudhir Saini

Any one device can create only three iCloud accounts; if your phone has already created three then it can never create any more - this is tied to the hardware, not the user account. You can create an iCloud account on another iOS device or a Mac and then you will be able to sign into that on your phone.

I want to install an app but only for one user on my imac with Lion

I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

Setup of iWork in your wife's account should only occur the once.
Updates can be performed through your account and are usually performed via Software Update.
Messages should not be popping up in your wife's account if all the iWork updates have been performed.
Go to Software Update and download and install all the iWork updates.
Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

Long delay for add-in saving emails with Cached Exchange Mode off for one user's Exchange account

Similar Messages

Maybe you are looking for