Long delay for playback after moving a clip in timeline in Premiere CS6

Whenever I move a clip in the timeline I have to wait a really long time for the image to show up in the preview monitor after pressing play. Audio starts ok but I see a black screen for a long time (varies from aprox. 2 to 30 seconds).
This is a bit annoying as it disrupts the editing flow and really slows down the workflow.
I'm cutting a Red Epic sequence on an 2011 iMac with 16 gb of ram. I never got this behaviour in CS5.
Any suggestions?

We need to know more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Also, to isolate the problem, try using some other media, not the Epic footage.

Similar Messages

Long delay for login list to appear Mavericks Server

I am currently looking at an issue where the login list of users takes up to 30 seconds to appear after a user has logged out of their account. This might not sound like much time, but is a long time for the user waiting to get the list. Any ideas on where to look for a remedy, or what tests might be applied would be appreciated.
Clients are all 2012 - 2013 iMacs and Macbook Airs - About 140 nodes
Server is a new Mid 2012 Mac Pro Server running Mavericks server with all updates. Open Directory network.
Network is Gigabit with a 3com 4500 Layer 3 switch and Gig Lan switches.
Message was edited by: Don Roedl - To edit out my personal machine, which is not relevant to the issue.

Hello Don
We have experienced the same issue.
Are all clients 10.9 clients or 10.8 ?
If 10.8 home directories should be served as AFP protocol. If 10.9 clients then it is SMB ( SMB 2 ) OS X 10.10 Yosemite has moved from SMB2 to SMB3.
Make sure in clients that you have "Show fast user switching" ticked off.
Otherwise, the user logs out but the client machine will almost never unmount the previous user home directory shared point, the next user will not be able to log in.
In Server.app under File Sharing you see idle users even after successful log out. It was our case.
Some people on the internet went to the terminal to add precious terminal commands to force kill idle users after a "x" hours for instance.
http://krypted.com/mac-security/missing-server-app-settings-for-afp/
10.8 and 10.9 have differences.
I suggest you read http://www.amazon.com/Apple-Pro-Training-Essentials-Supporting-ebook/dp/B00HJUBR Q0
Even if you have lots of experience with OS X.

Takes long time for shutdown after adding to domain

Hi,
Workstation OS - Window 7
Domain Controller OS - Window server 2008 R2 standard
Following thing i have measure with Stopwatch.
1) When the laptop is in workgroup, it takes just 17 second for shutdown.
2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
Why the shutdown time increased so much?
Do you have any idea?
Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
There is no logoff scripts / gpo's as well as we don't have roaming profiles.
Please advice.
Thanks & Regards,
Param
www.paramgupta.blogspot.com

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

Long delay for authentication dialog 10.6.x to Windows 2008 SBS

I am encountering a very long delay (30-45 seconds) for the authentication dialog when connecting from Mac OS X 10.6.2 clients to a Windows 2008 Small Business Server.
We are connecting using the "Connect to Server" dialog, using smb://<server host name> and smb://<server IP address> as the URIs. Once the authentication dialog eventually comes up the users can log in successfully and access the shares on the server normally and at normal speed.
I see this entry show up in the system.log when a smb connection is started:
/System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent ### * process ### exceeded 500 log message per second limit - remaining messages this second discarded *
I would like to see the NetAuthAgent log that is referred to in the error but I haven't been able to determine where this log resides or it I need to set NetAuthAgent or the smb client into a debug mode to capture logging.
I have tried many of the usual fixes on the server side when it comes to Mac compatibility including:
•Disabled SMB signing
•Setting these registry values to 0:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Enablesecurity signature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Requiresecurit ysignature
This was asked last October with no resolution:
http://discussions.apple.com/thread.jspa?messageID=9804807
If anyone has encountered this issue and discovered a solution please help. Thanks in advance!

I'm having an issue with 10.6.x lately and Windows 2003.
Random disconnects and the same log errors about the message limit.
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/VideoSAN', from '//ACC;Phillip.Roncoroni@acc-office/VideoSAN', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/ACC_docs', from '//ACC;Phillip.Roncoroni@acc-office/ACC_docs', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Drop Box', from '//ACC;Phillip.Roncoroni@acc-office/Drop%20Box', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 3 filesystem(s) with problem(s)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Photos', from '//ACC;Phillip.Roncoroni@acc-office/Photos', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 1 filesystem(s) with problem(s)
Also looking for a resolution.

After 7.0.2 long delay for menù showing up after restart

Good morning , after upgrading to 7.0.2 my ATV 3 restart with only family sharing and configuration menù....i think it was a fault on the fw upgrade so i reset to default configuration.
after restart everythings goes well and i restart configuring ATV but if i restart from the menù my ATV next boot again comes only family sharing and configuration...i think it was a fault in the 7.0.2 because if you also try to search for fw upgrade again i have error saying it was not possible to connect to the server...so i start thinking that after boot wireless interface is not ready...i left on ATV for about 5 minutes and magically all the menù appear...
before 7.0.2 there is no such problem...anyone experience the same ?
please let me know because i don't want to reconfigure the whole ATV to discover i need to hardware initialize again to try to solve the problem...

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

CS4/Win: markers are not moved after resizing a clip in timeline

Hello,
when I am resizing a clip in the timeline my markers after this clips in the same timeline are not moved, too.
Bug or feature?
If it is a bug: stilil

function(){return A.apply(null,[this].concat($A(arguments)))}
cmeira wrote:
Ok, thanks
But there is a question left: bug or feature? I can't see an advantage of this behavior ... and no solution...
The same behavior in CS5, too?
Neither, is as designed.
CS5 is excactly the same.

Interesting Observation and fix for crashing while moving / trimming clips

Since day one I have been plagued by STP crashing when I tried to trim clips or move them in time. Recently I noticed this only happens on projects sent to STP from FCP. New projects have never had this horrible symptom.
So I copied all the assets of a project to the clipboard and pasted them into a new empty document and the problem went away. I needed to tweak the positions of some of the automation anchor points but that was minor.
I just thought I'd share that with you folks. After this current project is complete I install FCP Studio 3 and the new STP. Maybe the bug is fixed in the new version.

Nice workaround. Thanks for sharing it!

Need long delay for buffered CO task

I want to create a buffered CO task, when triggered, delay 5 min before output pulse. Is this possible?
PXIe-6341, Win7, LabVIEW 2013.
The channel property: initial delay doesn't work for buffered CO task.
The trigger property: start.delay not supported for the device.
George Zou
http://webspace.webring.com/people/og/gtoolbox

Hey, George
I do have a suggestion for you. Here's some code that will delay a set number of pulses of an input signal. If you input a 1kHz signal, then waiting 300,000 ticks would correspond to 5 minutes. You may have to use another counter to generate a pulse train signal that acts as the 1 kHz input, but this code is how you can do they delay. After the 300,000 ticks are counted, a pulse of a specified width is outputted by the counter which you could use as a start trigger for another task.

Long delay for add-in saving emails with Cached Exchange Mode off for one user's Exchange account

Hello,
Before I start, I have asked questions in the Outlook Developer forum and was referred here as it appears to be an Exchange Server problem that I am experiencing, not related to Outlook or the add-in that I am developing.
I am an Outlook developer with an Outlook add-in that adds MAPI properties to emails and then calls MailItem.Save to save the changes.
The add-in uses the Internet Message ID MAPI property for some functionality, so I have to turn turn Cached Exchange Mode off to ensure that my functionality works correctly for the Sent Items folder (otherwise no Message ID property exists).
This process works fine for 99% of users.
I have one particular user that has a huge delay (~1 minute) when MailItem.Save is called for items in his account. He is using an Exchange account. If I switch Cached Exchange Mode on there is no longer a delay (as no communication with Exchange Server). The
user does not have an excessively large Mailbox.
The problem is not caused by the network or communication path to the server as the problem exists on any computer where other users are ok.
I'm sure the problem is not caused by my add-in, but likely a problem with the user's Exchange account. Does anyone have any suggestions on how I may be able to resolve the delay and what might be causing it?
Thanks
Glen Thomas

Hello,
Before I start, I have asked questions in the Outlook Developer forum and was referred here as it appears to be an Exchange Server problem that I am experiencing, not related to Outlook or the add-in that I am developing.
I am an Outlook developer with an Outlook add-in that adds MAPI properties to emails and then calls MailItem.Save to save the changes.
The add-in uses the Internet Message ID MAPI property for some functionality, so I have to turn turn Cached Exchange Mode off to ensure that my functionality works correctly for the Sent Items folder (otherwise no Message ID property exists).
This process works fine for 99% of users.
I have one particular user that has a huge delay (~1 minute) when MailItem.Save is called for items in his account. He is using an Exchange account. If I switch Cached Exchange Mode on there is no longer a delay (as no communication with Exchange Server). The
user does not have an excessively large Mailbox.
The problem is not caused by the network or communication path to the server as the problem exists on any computer where other users are ok.
I'm sure the problem is not caused by my add-in, but likely a problem with the user's Exchange account. Does anyone have any suggestions on how I may be able to resolve the delay and what might be causing it?
Thanks
Glen Thomas

Long delay for ManagedEventWatcher __InstanceCreationEvent query as number of user sessions increases

We have a Windows service that monitors for process start events and sends notifications to client applications.
We have discovered that the delay between when a process starts and when our EventArrivedEventHandler is called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
The delays are not consistent. Even with 100 sessions some observed delays are short but most are too long and the maximum observed delay grows with the number of sessions.
Here is one example of the delay we are seeing.
A client application wrote its first log record to its log file at 11:05:34.076. Our EventArrivedEventHandler did not get notified of the process start event for the client application until 18 seconds later (at 11:05:52.188 ).
We need the delay to be less than 5 seconds to be tolerable and would like the delay to be less than 3 seconds if possible.
Is there something we can do to reduce the delay? Below are the details of our use of WMI.
We are using an instance of class WqlEventQuery to represent a WMI event query in WQL format.
We are constructing an instance of ManagementEventWatcher to consume events asynchronously.
Below is how we are instantiating and running the query. Variable m_PollingIntervalInMilliseconds is set to 1000 by default.
                WqlEventQuery query = new WqlEventQuery("__InstanceCreationEvent", new TimeSpan(0, 0, 0, 0, m_PollingIntervalInMilliseconds), "TargetInstance isa \"Win32_Process\"");
                m_ManagementEventWatcher = new ManagementEventWatcher(query);
                m_ManagementEventWatcher.EventArrived += new EventArrivedEventHandler(managementEventWatcher_EventArrived);
                m_ManagementEventWatcher.Start();
Our Windows service is not the only user of WMI services on the server. I do not know if there is contention with other users of WMI services or if there is something about the way we are consuming WMI services that is inefficient.

Hello RossAtWFMC,
It seems that the services are working with a complex environment, and currently, we do not have such an environment which could reproduce this issue you described. Anyway, I would like to share whatever I found and some suggestions about this issue:
>> called gets excessively long when the number of user sessions on the Windows server gets to about 80.
The delay gets worse as the number of user sessions gets higher.
This seems to show that the issue is related with the number of user sessions, it may be that when with lots of user sessions, there are something additional delay the event to be fired. As you mentions, there are other services on that server machine, if
possible, you could make a test to run your WIM service only to see if it is still delayed.
>> Is there something we can do to reduce the delay?
I suggest that you could check this blog below which provide a way to debug with the .NET course code:
http://blogs.msdn.com/b/dotnet/archive/2014/02/24/a-new-look-for-net-reference-source.aspx
So that you could know which method inside costs most time.
From your provided code, it is not very clear if you use multi threads in your service, if not and your event handler is short, you could have a try with it, and there is a discussion about this topic:
https://social.msdn.microsoft.com/Forums/en-US/13f30e33-7f61-498e-a91a-ef982a63453c/event-handling-in-multithreaded-apps?forum=netfxbcl
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My 3g 16mb damaged by water now works except connecting to internet. Have no account for it after moving to my 3GS. Can this phone be used again?

I want to sell the phone since every test done shows it to be working after two years of drying out.The only service not working is connecting to the Internet. That i believe is caused by transferring AT&T account to new iPhone. Is there any test of older iPhone to see if it can connect to the Internet?

Amazing to see that the iPhone with the SIM card from my new iPhone worked good. The only problem I had was with AT&T. Somehow they got the idea I had set up a new account and starting charging me for that instead of continuing with my old one. After talking to them, that problem was taken care of.
Another five months passed and I tried to power on the old phone without the SIM card, which I had done successfully before. This time the battery was down to zero and will not take a charge.
Is this the final resting place for the dunked iPhone or is there a way to recharge the battery?
Would appreciate new help. Thanks.

Certificates no longer work for signing when moving to Acrobat XI

Hello,
At my organization we have vendor-supplied certificates (x.509 v3) that we use to sign PDFs. These certificates function correctly with Acrobat 7, 9, and X (mix of XP and Win7). When attempting to sign a PDF in Acrobat XI (Win7), an error is reported by the Windows CSP: "The requested operation is not supported. Error Code: 2148073513".
I also have some certificates generated in-house that do not result in this error, and sign correctly with Acrobat 7, 9, X, and XI.
My guess is that some property of the vendor-supplied certificates is not playing well, and that it must be some difference between the two. The vendor certs have about 10 extensions, mine has 2. I've pasted a dump of the additional extensions below; all other details appear to be shared. Key size is 2048 for the vendor, 1024 for in-house.
Thank you!
Certificate Extensions: 10
    2.5.29.15: Flags = 0, Length = 4
    Key Usage
        Digital Signature (80)
    2.5.29.32: Flags = 0, Length = 13
    Certificate Policies
        [1]Certificate Policy:
             Policy Identifier=2.16.840.1.114027.200.3.10.2.1
    2.5.29.17: Flags = 0, Length = 1a
    Subject Alternative Name
        RFC822 [email protected]
    2.5.29.9: Flags = 0, Length = 15
    Subject Directory Attributes
        Entrust User Role=161
    2.5.29.31: Flags = 0, Length = 16d
    CRL Distribution Points
        [1]CRL Distribution Point
             Distribution Point Name:
                  Full Name:
                       Directory Address:
                            CN=CRL281
                            OU=Commercial Private Sub CA1
                            OU=Certification Authorities
                            O=Entrust
                            C=US
        [2]CRL Distribution Point
             Distribution Point Name:
                  Full Name:
                       URL=http://comprivweb1.managed.entrust.com/CRLs/EMSComPrivCA1.crl
                       URL=ldap://comprivshad1.managed.entrust.com/ou=Commercial%20Private%20Sub%20CA1,ou=Certif ication%20Authorities,o=Entrust,c=US?certificateRevocationList;binary
    2.5.29.16: Flags = 0, Length = 24
    Private Key Usage Period
        Not before=Thursday, September 27, 2012 2:07:29 PM
        Not after=Monday, November 03, 2014 1:37:29 AM
    2.5.29.35: Flags = 0, Length = 18
    Authority Key Identifier
        KeyID=d6 57 4d cb f4 e9 cd 6a cb 67 b4 ba 1d cf 10 d3 8b d6 2c 99
    1.2.840.113533.7.65.0: Flags = 0, Length = c
    Entrust Version Info
        Entrust Authority Security Manager Version=V8.0
        Key Update Allowed=Yes
        Certificate Category=Enterprise

The issue is that Adobe cannot access the path of the CRL since they don't support LDAP path. To resolve the issue you need to uncheck the option to embedded the CRL status in the signature information. To change it go to Edit > Preferences >Security > Advanced Preferences > Creation tab > de-select Include signature's revocation status when signing
I've add screenshots from Adobe X & XI:
Edit > Preferences >Signatures > Creation & Appearance > More > de-select Include signature's revocation status when signing

Keyboard Shortcut for moving a clip in timeline to a higher or lower track?

Hi all,
Sure seems like this should exist but I cannot find it.
I want to be able to select clips in the timeline and click a keyboard shortcut to have the clip jump straight up to the next track above.
Anyone know if this is possible?
I have six hours of edited material and literally thousands of B-camera clips to move.... a keyboard shortcut would really help in this situation.
Thanks,
Matt

In the PDF files of the FCP user manual, and in the Quick Reference (Keyboard Shortcuts) menu item from within FCP.
Option-↑ (that's Option & the Up Arrow) This works provided that there are no clips in the track space directly above the clips that you're looking to move. (if there are clips, it will fail; you'd need to select those clips as well for it to work. That or move those clips first.)< </div>
So, we all have to ask, "Why isn't this in the manuals? And, we might as well ask, how many other undocumented features are there in FCP? "
bogiesan

Long delay for Flash video to appear

This is the second of a series of related questions about
Flash video in DW.
When I embed an flv into a DW page using "insert flash
video", as you'd expect, it plays immediately when previewing it
locally.
When I view it live, i.e. online, however, it takes sometimes
as long as 8 second before the player appears on the page.
Once it appears, it plays fine. But the delay is
unacceptable.
Any ideas?
Thanks.
david

Must be a fairly large file. Try sizing your video down to
320 x 240 px or
shortening the running time to reduce file size.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"tenorocity" <[email protected]> wrote in
message
news:fge6fg$85c$[email protected]..
> This is the second of a series of related questions
about Flash video in
DW.
>
> When I embed an flv into a DW page using "insert flash
video", as you'd
> expect, it plays immediately when previewing it locally.
>
> When I view it live, i.e. online, however, it takes
sometimes as long as
8
> second before the player appears on the page.
>
> Once it appears, it plays fine. But the delay is
unacceptable.
>
> Any ideas?
>
> Thanks.
>
> david
>
>
>

Cartridge for D1668 after moving to another country

I bought a D1668 printer while living in China and now I have moved to Europe and need to buy new ink but then I can't get cartridge 818 anymore so what should I use?
I tried with 300 but it didn' work.
Or do I need to scrap the printer
This question was solved.
View Solution.

Hi,
Ensure you have a full set of genuine HP 300 Black and Tri-color ink cartridge available and have the printer installed and connected to a computer.
Within the form at the following link clcik on Change Country and select your country, then fill the form and you will be provided with a case number and the contact details to contact HP:
https://support.hp.com/us-en/contact-hp/product/HP-Deskjet-D1600-Printer-series/3811065/model/383707...
Call that number and a support representative will guide you with the steps to reset the printer to accept the local ink cartridges for Europe from now on.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Long delay for playback after moving a clip in timeline in Premiere CS6

Similar Messages

Maybe you are looking for