After dragging a map and navigating away all other scenes are off centre..

My Flash document contains several scenes, one of them is a draggable map including hotspots/buttons to navigate to another scene.
After dragging the map then navigating from one of the buttons the next frame is remains off centre (as if when the map was dragged the whole Flash movie has been dragged away from the centre stage).
The map is a graphic, inside that it is a button and then inside that the navigational button.
In the timeline in an actions layer I have:
stop();
mapisland.onPress = function(){
    this.startDrag(false,296,317,-55,10);
mapisland.onRelease = function(){
    stopDrag
mapisland.onReleaseOutside = function(){
     stopDrag
And applied to the hotspot button:
on (release) {
    this._parent.gotoAndPlay("Arrow");
The navigation and drag work fine, however as I stated before when navigated to the "Arrow" scene the all that can be seen of it is just a corner.
Any help would be greatly appreciated. Thank You
Ric

If your Jetpack is powered on then you are going to be liable for any data usage that occurs.  It doesn't matter if the usage was intentional or not.  The best practice while investigating a data usage/overage situation is to power down your Jetpack when you are done using it.  That is the only way you can be sure that your sleeping devices are not actually communicating and pulling updates.  Situations like this are often why I do not suggest Jetpacks as a primary internet connection from home.  Jetpacks are designed to be temporary and mobile internet connections best suited for a traveling business man or someone frequently on the move.
It sounds like you have done everything that VZW can normally do in an overage situation.  You had your first overage wiped, had the device swapped out and changed passwords (although that shouldn't matter from your description).  The only loose end you haven't tended to is leaving the Jetpack powered on when not in use.  That or switching to a different Jetpack model or 4G LTE device (ex. USB modem+router or 4G LTE router) to see if they behave any better.
My suggestion would be to terminate considering the amount of time and money you have already invested in this situation.  Give another service provider a chance and see if the performance is any better.  If you spend more time troubleshooting it should be on how to handle the termination fee (which is pro-rated). VZW will still be here if you decide to return down the road, perhaps things will be better.

Similar Messages

  • HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?

         after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?  thanks.

    thanks for the reply.  guess i'll have to do that.  apple, not really happy with what you've done with this latest update.  have not been able to enjoy my music in my car since the update.  most of us dont mind changes that progress timely, but this was much more than just a progression.  this was a complete change.  and not a good one, at all.  thanks to the two people that replied.  appreciate it.

  • Message "session is already open.." even if all other Imac are off!

    Hi,
    Message at the login window of the user computer: "session is already open on another computer.."
    user can not login even if all other computers are off.
    I rebooted the server, no change!
    What is wrong?
    Thanks,
    Andrew

    I configure the accounts to able to connect simultaneously on different computers

  • Can't access a school web site that I've used for years-can't log in with user and password. All other bookmarks are fine-tried several things including re-install-Other browsers are O.K.

    I have an iMac-have used Firefox exclusively for years. I can't access a school web site-can't get past the log in with user ID and password. Screen stays at log in screen. Tried clearing history-tried uninstall and re-install. All other web sites/bookmarks work fine. Thanks in advance.

    Try clearing the cache and deleting cookies for the site, this can sometimes resolve problems accessing sites that used to work. See [[how to clear the cache]] and [[deleting cookies]] for details.

  • IPad mini not recognised by iTunes after updating to iTunes 11.1. All other devices are recognised...

    After upgrading to ios 7, adn iTunes 11, I had some problems with both airplay and having my ios devices not recognised by iTunes. After a few fixes (re-installing Apple Mobile Device support ) manually, all is now looking good, apart from my iPad mini.
    Windows recognises it when I plug it into any of the USB pports on my PC, however iTunes does not see it. The device is recognised by iTunes onother windows and Mac computers I have.
    Is it posible to isolate which driver is being used by the mini, and uinistall it? I guess that if Windows sees the device as a "new one", it will re-install the device driver, and probably fix this issue.

    Hey there BeakyGB,
    Thank you for using Apple Support Communities!
    Great troubleshooting done so far. I would next try this article named:
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    Cheers,
    Sterling

  • Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Do as Mylenium told you. If you don't know where it is. Go to www.adobe.com, sign in, search for the cc cleaner tool downloader and it should fix the issues. Have you went into your control panel, under programs and features and removed it from there?

  • I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    Hi jandroantonio,
    Welcome to Apple Support Communities.
    It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Best,
    Jeremy

  • Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

    Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

    It's starting in safe mode > http://support.apple.com/kb/HT1564
    First of all, do a PRAM reset. If it doesn't help, open Terminal and type:
    sudo nvram boot-args=""

  • I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared  I have an IPhone 5.  Has this happened to anyone before?

    I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared  I have an IPhone 5.  Has this happened to anyone before?

    That is very strange! Have you been able to get your apps icons back now? Have you attempted a soft reset by holding the power button and home button at the same time until the phone restarts? Keep me posted with the results!
    BryanS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • After restarting firefox all tabs go under startup window and all other windows are gone

    ok, so i have 5 or 6 different windows with firefox's new tab feature. Each windows has about 6 websites/tabs in them. Whenever i close and reopen firefox all the tabs go under the startup window, and all other windows are gone.
    Should firefox 4 not restart with all windows and all tabs under the correct window?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

  • How to find all intersections of children of currency dimensions and currentmembers of all other dimensions where data exists

    Hi all, I have a requirement where I need to find all intersections of children of currency dimensions and currentmembers of all other dimension wherever data exists for them.
    Its a ASO cube with and version is 11.1.2.2.
    If I try to write the formula in a the below way to test, I get an error that 'Currenttuple can only be used with a named set'. But when I try to create a named set with the 'WITH' keyword, it not able to recognize the 'WITH' keyword. I think I am missing something obvious and this may not be the correct way to achieve this. Please help.
    1st try with just Currenttuple - error 'Currenttuple can only be used with a named set'
    iif(
      (isgeneration([Time].currentmember,4)),
      CASE
      WHEN NOT ISEMPTY(
    Crossjoin([Currency].Children,
    {([Time].currentmember,[Org].currentmember,
    [S Org].currentmember,[C Code].currentmember,
    ).Currenttuple
      THEN  Missing
      ELSE Missing
    END, Missing)
    2nd try to create a named set with 'WITH' keyword - syntax error at WITH
    /*with set [NewSet] as                                      
    'Crossjoin([TC].Children,
    {([Fiscal].currentmember,[Organization].currentmember,
    [Sales Org].currentmember,[Company Code].currentmember,
    [Measures].currentmember,
    [Product].currentmember,
    [Channel].currentmember,
    [Order Reason].currentmember,
    [Country].currentmember,
    [Billing Type].currentmember,
    [Business Area].currentmember,
    [Sales District].currentmember,
    [Data Source].currentmember,
    [View N/A]
    iif(
      (isgeneration([Fiscal].currentmember,4)),
      Filter([NewSet], NOT IsEmpty([NewSet].CurrentTuple))
    , Missing)

    Hi Tim,
    Thanks for you reply and sorry for my delayed response. Actually there is one more requirement in this, which makes it a bit complicated. There are another set of members in the Measure dim called FXDirrate and FXIndrate. The logic is :
    1. If data exists for the combination of a Currency.children, FXDirrate and current member of all other dims
    then convert the value for Currency.children by diving by FXDirrate
    2. If data exists for the combination of a Currency.children, FXIndrate and current member of all other dims
    then convert the value for Currency.children by multiplying by FXIndrate
    3. Then value of the calculated members will be sum(all FXDirrate converted + all FXIndrate)
    Currency does roll up but as the data for its children can either be in Dirrate or Indrate and the sum needs to be taken after the conversion, there I am not able to proceed as I am not able to check the existence of data in individual children of currency as Isempty isn't working on a set . Thanks a lot for your help.

  • After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    This seems to be most common with lower resolution pictures.  You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale.  Or user a higher resolution picture, which works better with the new OS.

  • I can't download Ikea 3D kitchen planner.  It's really frustrating - a message is appearing on my mac book pro that I ned to get info and check that various files are unlocked.  I've checked that all other requirements are fulfilled, still won't download

    I can't download Ikea 3D kitchen planner.  It's really frustrating - a message is appearing on my mac book pro that I ned to get info and check that various files are unlocked.  I've checked that all other requirements are fulfilled, still won't download.  Any help very gratefully received.  Thank you.

    Hi, I'm not really very good with computers and am having the same problems when trying to install the Ikea 3D kitchen planner, please could you take me through the steps?
    1. Download (save) the disk image file 2020PluginInstaller.dmg
    I double click on the link which says "Install 3D Planner"
    I agree to the t&cs
    A file downloads to my download folder called 2020PluginInstaller_IKEA.dmg
    2. Mount the disk image (open/run the downloaded file) if not mounted automatically
    I double click on the downloaded file
    3. Find the 2020PluginInstaller window (might be behind the window on top)
    A small window opens up with a lego brick called 2020PluginInstaller_IKEA.dmg and a folder called Internet plug ins.  I highlight the lego brick and do File, Get info and unlock it
    4. Drag the lego piece to the folder (if you do not have admin privileges you will be prompted to authenticate)
    I do this and put in a password to authenticate
    5. Restart the browser (it is not enough to close the browser window, you need to restart the browser
    application)
    I've tried restarting Safari, I've tried re-starting the computer
    6. Access the same link and you will now see the Start button and be able to start planning your room!"
    When I go back to the IKEA kitchen planner I don't see a start button, I just see the exact same screen as before prompting me to install the 3D planner
    Please can you help?

  • I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
    And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
    LN
    PS you also need to update your profile - it states that you have OS X 10.6.8

  • I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

    I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

    That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

Maybe you are looking for

  • Applications open and close without really starting

    Often, when I download a 3rd party program (yes, I know, 3rd party, not supported, bear with me) and then try and run it, the program will appear in dock, bounce once or twice, the black triangle will appear and suddenly the program will just close a

  • Lync 2013 for Android problem

    Hi, We've got a problem with Lync 2013 client for andriod unable to connect to our on prem Lync 2013 deployment. Windows Phone clients can connect without any problems, Lync diagnostic tool doesn't throw any significant errors, PC clients are working

  • How to find out which object has a specific attribute value

    Hi all, which is the easiest way to check in a collection of objects which object has an attribute with a specific value? i.e. I have n objects of classA and they all have an attribute "String value;". How can I check which object has that attribute

  • Automatically create and sort into subfolders

    Hi, I have a large folder directory with a lot of photos in them. Basically something like Clouds Cloud_01 Cloud_02 etc. Trees Tree_01 Tree_02 Each subfolder has both .jpg and .cr2 (raw) files in them I'd like to be able to run a script or automator

  • Error when posting unplanned depreciation

    Hello, When posting an unplanned depreciation  we are facing an error "In area 01 you can post manual dep upto the amount 0.00". I checked the depreciation area and in it when for unplanned depreciation changed the setting to postive values but the e