After install with AD, user must have adminrights ...

Hello
i made a working installation with active directory. the pc suite gets installed correctly.
if a user plug in the mobile phone for the first time, all drivers are getting installed except the modem driver. it needs admin rights for the installation, but i cannot go to every user and login with my admin for this driver installation.
is there any good solution , that the driver is getting installed, without login specially with an admin?
cheers
marco
sorry for my english. my mother language is German

Hi,
Please check registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CoDeviceInstallers -> {4D36E96D-E325-11CE-BFC1-08002BE10318}.
There is text something like "NetCfgx.dll,ModemClassCoInstaller
setup\FxsOcm.dll,FaxModemCoClassInstaller". Make sure that there is carriage return before word "setup".
I found out that that registry entry was corrupted on my computer and that's why Windows did not find correct installation services.

Similar Messages

I did Archive &amp;amp;amp; Install with "preserve users", why do I now have NO users?

After a hard crash on my mom's PowerBook G4 (running 10.4.11) I eventually did an OS 10.4 Archive & Install with "preserve users". I now have NO users, not even an administrator, what should I do? The only indication I see that anything was remembered is the login screen does say:
Mac OS X
Jane Brown's Computer
(But as I recall, there's a bug that sometimes that personalized text sticks around forever once it's set the first time in the OS)
None of the login names or passwords I remember work. I checked using a boot DVD with the "Reset Password" utility, but the only user it sees is "System Administrator (root)".
I can think of 2 options from here, but I'd like advice, or another option. One...I could somehow force Setup Assistant to run (how?), create a new administrator, and then do...some process to get back the one user setup I care about (my mom...her files, etc)?
Or two...I'm not a COMPLETE idiot with Unix (but close)...could I find an old, working Netinfo db and restore it and fix things that way? I did that years ago, following instructions. I don't know if there is a working Netinfo around though. In single-user mode I tried "ls" while in /var/backups/ and saw nothing at all.
The history of how/why I did the Install:
My mom's system freaked-out and crashed hard during normal operation (she was just launching AppleWorks)...subsequently all attempts to boot left it at a completely black screen with a single white cursor block in the upper left. No prompt though, and unresponsive to anything I typed, so I wasn't in a normal Darwin. The only way it could be powered-down was to hold down the power key for 10 seconds.
I tried various things...reset PRAM, used "Disk Utility" from a boot DVD (it found no disk problems...though Repair Permissions refused to run, it kept losing connection to the HD), Safe-Booting (which didn't work, it hung with a blue screen, gray Apple logo, no spinning gear), etc. Nothing worked. Booting in verbose mode did go part way, then it stopped with some kind of disk I/O complaint. I forgot to write it down. My guess, since disk repair found no disk problem, that an OS file was corrupt, and trying to read that resulted in an I/O error.
So I did an Archive & Install with "preserve users". All seemed to go ok. Until I tried to login.

I followed the steps, the new accounts are there, but they aren't working properly. The primary account worked ok once.
Based on the behavior of 2 accounts (primary admin, + my mom's), even under Safe Boot, it seems like there's something that's failing during login that causes all attempts to login to succeed partway, then crash, and throw me back to re-login.
What happened: I had reset the Netinfo, & created a first admin matching before. After a long time, I got a normal desktop (& it had the desktop icons & Dock layout of the previous primary account). I created the next 3 users (there were no gaps), and then set it to auto-login to my mom (standard user).
If I Safe Boot so I can try logging-in as the original admin, I get a menubar, a customized Dock (with an odd, empty white square in place of one of the icons), and a spinning beachball against an empty desktop for a while, then it drops me back to the login screen. Same thing if I try my mom's account while Safe Booted.
I have a 2nd admin account, if I try that while Safe Booted, I get a menubar, empty desktop, and an endless spinning beachball. I have to hold down the power key to shutdown.
I tried holding the shift key immediately after login (disable startup items) to see if that helps, but it didn't. Doesn't even seem to work right, because when I boot normally to auto-login to my mom's account, even with shift, her startup item is still launching (a simple app that timestamps a file).
If I don't Safe Boot...it does auto-login to her account, I get a beachball, it slowly builds her entire desktop back just the way it used to be (desktop icons, customized Dock)...then it crashes to a blank blue login type screen and tries all over again, endlessly trying to login, crash, try again. I have to use the power key to force a shutdown.
Force Quit (via the keyboard) never helps in any of the situations, I get no popup window.
I did use Disk Utility again to see if it repaired anything, but all it fixed were a few permissions, which didn't change anything.
What next? What would you suggest now? They're almost working. Is there a log I can examine in single-user mode that would tell me what's failing during login? Should I reset the Netinfo db again and re-create users? Do I need to install again? Preserving or not-preserving users?

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Is there a way to uninstall Legacy and Compatibility Content after installing with Additional Content?

Is there a way to uninstall Legacy and Compatibility Content after installing with Additional Content?

Hey Antonio,
That's a good suggestion, and it's something that we're already planning on addressing in the next release, probably via a service that you can use to view information about patches and notifications -- not only the ones that were known at the time that you installed, but also ones that might have come into existence since then.
In case you're still looking for the link to that CVI 2009 notification, you can find it here.
By the way, my world cup sympathies to you -- your guys were robbed.
Luis

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

After install of Mountain Lion I have no facetime. It is nowhere in hd and ap store will not allow download. Will I need to re-instal ML in order to get it back??

After install of Mountain Lion I have no facetime. It is nowhere in hd and ap store will not allow download.
Will I need to re-instal ML in order to get it back?

Where are you, geographically?
I might suggest:
Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).
If this doesn't work, then reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system

HI,
LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system.
I had LR 5,7 running and was not installed via the CC.
What to do
Thanks.

Hi Ridder,
Please refer the solutions given in the following article.
Lightroom doesn't launch or closes automatically after splash screen
Hope this helps.
Regards,
Sumit Singh

Timestamp Parameters With Zero Scale Must Have a Precision of 13, 16, Or 19.

Hi Madhu Provide full target table name for target under session properties - mapping - target table- target table name.suppose if schema is abc and table name is dbo.blr then given target table name = abc.dbo.blr It has worked for us and hopeful that it ll work for you too. RegardsNitish

Hi, I am getting the following error when I try to load data from Oracle to SQL.FnName: Execute -- [Informatica][ODBC SQL Server Wire Protocol driver]Timestamp parameters with zero scale must have a precision of 13, 16, or 19. Parameter number: 4, precision: 999.
FnName: Execute -- [DataDirect][ODBC lib] Function sequence error . Also i am not having any field in the source as dataTime data type.Not getting exactly where to look for the issue. Please advise. Thanks & Regards,Madhu

Can I install earlier versions after installing latest version?I have 12 installed on new computer but would like to install 8, 10, and 11

Can I install earlier versions after installing latest version? I have 12 installed on new computer but would like to install 8, 10, and 11

This is easily one of the most popular requests on this forum.
Try http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Follow the Very Important Instructions on that page first otherwise the links will not work.

After install of 10.9.2 have problems with rebooting

I have had to reinstall 10.9.2 and won't dare reboot because:
After install of 10.9.2 I reboot and got some kind of error that would not let me get to the logon screen. I'm not sure exactly where the hang up occurs but the output looks something similar to when booting with opt-S. The only thing I remember are words "osx version not set." The only way I could get things working again was to do a fresh install.
The second error occured after installing wireless mouse software that required a reboot. This time I could get to the logon screen but my keyboard no longer worked. In other words, there was a prompt for username and password but no keypresses were being registered. Once again the only thing I knew of to do was to reinstall.
Is there anything I can do to be able to tell if there is some latent problem waiting to happen if I try and reboot? Or should I just keep the machine on all the time now?
Thank you

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
      Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
     Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

IMac goes to sleep/hibernate multiple times per day after installing Maverick OS. I have to shutdown and power back on.

iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc.
I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty. The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back. I have checks by: Put hard disk to sleep when possible and wake for network access. Any help would be greatly appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After installing iMovie 4 my Bookmarks have disappeared!

Actually, several things happened after installing iMovie. My ethernet adapter wouldn't work, but fixed that...kinda. It will now recognize my ethernet adapter if I plug it in after I boot. I also can no longer find my Download folder. There were three Download folders. One was the temporary one (I'm talking about that little Download window which pops up so you can see what you're downloading). Another one had all my downloads. Another, for some reason, had only 4 downloads from when I first began using the Powerbook 7 years ago. That one I can find. But the main one is gone. I just installed the update for iMovie (4.0.1) but that didn't do anything. Previous to installing iMovie I renamed my "Home" icon, but after the iMovie install it has reverted to the old name and when I try to change it back it says the name is already taken. I tried using Finder to retrieve the name I had changed the Home icon to, but it doesn't come up with anything. Is there a way to revert of they system settings before I installed iMovie 4?

I doubt that anything related to iMovie will fix your problem. iMovie has nothing to do with your ethernet adapter or with Safari's downloads folder and bookmarks. You probably need to go to the OS X discussion area.

My CS5.5 MC serial not accepted even after installing with FB 4.6

Hello all,
My CS5.5 MC serial number is not accepted by FB 4.6 even after start it in trial mode as suggested here: http://kb2.adobe.com/cps/924/cpsid_92402.html
Can anyone help me?

Hi,
Is MC (CS 5.5) already installed on your computer? If so, does it have FB 4.5 also installed as part of it? If FB 4.5 is already installed (either as point product or as part of CS 5.5), you need to uninstall FB 4.5 before installing FB 4.6
After uninstalling FB 4.5, run FB 4.6 installer. Instead of enterning the CS 5.5 MC serial number during installation of FB 4.6, install FB 4.6 as a trial first.
Are you able to launch FB after installing as above?
Is MC serialized already on your machine? Then FB would pick up that serial number automatically and work like a premium version.
If not, it would show the serial number screen when you launch FB 4.6 and it would then accept MC 5.5 serial number.
Please follow the above steps in the same order and let us know if that works.
Thanks,
Deeptika

Pages, numbers, iPhoto, iMovie and keynote will not update after installing yosemite and yes I have the original disk

How do I get pages, numbers, keynote, iPhoto and iMovie to update after installing OS X 10.10? I have the original disk.

Cancel the updates. Delete the apps. Redownload them from the Purchases tab in the App Store.

Problem:Member is Read only Mode after login with other user

Dear,
I am facing problem to enter the data in member. i.e Read only. but same member is fine with login with admin user.
I also assign the security with write permission to user. but the only that member "X" is in read only mode..
Is task list can effect on that??? as i am also using task list. Becoz when i add another member that is not member of that hirechiary its fine.
I am working on hyperion version 11.1.2.1..
Regards,
AMSI

Thanks, Problem has been solved myself becoz when i add new member in the form as this form is already part of Planning Unit Hierarchy , that's why the newly added member in the form can't be write only till up to when u add this member into Planning Unit Hierarchy.
Regards,
AMSI

After install with AD, user must have adminrights ...

Similar Messages

Maybe you are looking for