After installing a windows7, SAPGui disconnection issue!!

Hi friends,
After installing a windows7, I faced a SAPGui problem.
If I am gone for a while, I see the below message on my monitor.
ECP: connection to partner 'xxx.xxx.xx.xx:3200' broken
WSAECONNABORTED: Software caused connection abort
ECP: connection to partner 'xx.xx.x.xx:3200' broken
Time - Fri Feb 03 13:01:44 2012
Component - NI (network interface)
Release - 710
Version - 39
Module - nixxi.cpp
Line - 4858
Method - NiIRead: P=xxx.xxx.xx.xx:3200;
L=0.0.0.0:55849
Return Code - -6
System Call - recv
Error No - 10053
Error Text - WSAECONNABORTED: Software caused connection abort
Counter -1
Please let me know how to fix it.
Thank you.

Ki-UK Lee,
Are you really still using SAP GUI 7.10 patch 39?
Release - 710
Version - 39
Is your backend also as old as your SAP GUI. I know SAP no longer supports either SAP GUI 7.10 or SAP GUI 7.20. Depending on your SAP NetWeaver release like ECC 6.0 7.31 EHP 4 and you won't be able to connect until you upgrade to SAP GUI 7.30.
Cheers,
Dan Mead

Similar Messages

BIOS non accessible after installing W10 x86. Serious Issue.

Potentially a serious issue.
From a "cold boot" (following a previous shutdown command) the BIOS is non accessible. The actual clickable text of "Press F2 to enter set up" is missing. This means that no recovery of this PC exists such as booting from
a Windows disc or other bootable media.
Fortunately, providing you can boot into W10 and do a restart, then the BIOS options appear.
This means that if Windows didn't boot into Windows your PC could well become a brick.

I hope I can help you about. I've note a funny thing on my PC: I have installed Windows 10 on a spare HDD, clean install on new formatted disk, without any other HDD inside. Later I've "shut down", unplugged all cables and removed
from PC the Windows 10's HDD. I have then rebooted my PC on my usual HDD, it was telling me when pushing the power-on button "stepping out from hibernation". I've seen ~ this before in 7 and 8 installations (only). Not a BIOS/PC/HDD problem for sure.
Maybe you have already done that before, sorry if my message is giving too much details, but I wouldn't want that you break something down on the process :-)
Try to follow those steps in this order:
1 - Remove all the medias connected (USB keys, CD, external HDD etc.).
2 - Plug off the power cord, remove the battery, remove the HDD (usually is easily accessible from one side or from down-side of your laptop), wait for 4-5 minutes, then put in the battery (or the power cord) and try to power on your laptop
without any HDD, USB key or DVD.
Normally you should see the BIOS as usual, it will announce you that you have no boot media, or that there is an error and default settings were loaded. If so, power off, disconnect power source (cord and battery), plug in the HDD and
restart the computer. If it's again blocking your bios, return to step 2 for removing the HDD. You may consider to thoroughly cleaning your HDD (including the MBR, formatting will not clear everything out, rather delete the partitions, re-create them, re-format).
If 1 and 2 don't change the state of your BIOS, the error it's not connected with your HDD/OS installed. It just happened that starts just after you installing a new OS.

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My second screen disconnects randomly after installing Yosemite. ¿Any suggestion?

My second screen disconnects randomly after installing Yosemite. ¿Any suggestion?

Hello Juanjeli,
Thanks for the question. Based on what you stated, it seems like you are having trouble using an external display. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Apple computers: Troubleshooting issues with video on internal or external displays
Thanks for using Apple Support Communities.
Cheers,
Mario

After installing visual studio, I get continuously disconnected from internet

Hi all.
I just installed Visal Studio 2013 Community on my new Acer R13 with W8 Pro. After installation, I get continuousy disconnected from internet. It seems to be something with the virtual adapter that VS creates in order to run WP emulators. Some times I have
to wait a minute or two and the connection comes back up, but sometimes I have o restart my system in order for it to work. Has any one run into this? Any suggestions?
The same thing happend o me on my old latop, a Samsung Chronos Serires 7. I used to think it was a problem with that compuer, but now it seems like a VS or Windows issue.
Thanks.
:. HUGONNE .: Please mark as answer if the post helps. Coding tips - http://hugonne.blogspot.com/

Hi Hugonne,
Based on your issue, to check this issue is related to the VS IDE or your Windows OS, I suggest you could try to install same version of VS on other machine check the issue.
(1) If you get same issue, I suggest you can try to repaid or re-install the VS2013 Community and then reset the VS setting check this issue.
(2) If you did not get same issue, I suggest you try to check your network connections on your windows. If the network connections did not have issue, maybe you will need to repair or re-install your OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Re: Satellite A500 slow even after clean install of Windows7

My laptop suddenly slowed down hugely about 4 weeks ago and seemed to have a virus problem causing a BSOD. Any attempts to solve this were unsuccessful so we have just done a clean install of Windows7 in the hope of solving the speed issue.
However it still takes several seconds to respond to each mouse click at a stage where only Bullguard anti-virus and Windows 7 are installed on the laptop.
I've checked that the latest BIOS is installed v1.90.
I've checked that all device drivers are up to date.
I've checked the hard drive for faults and bad segments.
Please can anyone offer help or advice?
Many thanks.

Hi
Toshiba recovery disk allows you to set the notebook back to factory settings.
So using recovery disk you will get the same state like at the first day of purchase.
But nobody can say if your notebook would run faster after recovery procedure.
Usually the notebook should work properly also with installed Win 7
But if the notebook will work correctly after the installation of Recovery disk, then there must be something wrong with the installed Win 7 system.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

After installing mountain lion i lost my pictures in iPhoto, lost my music in iTunes, internet became very slow. What can I do to fix this issues

after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues

Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on.

Issues after installing Hotfix Rollup 5 for SP3

Hi,
Last weekend we installed Hotfix Rollup Pack 5 for SP3 on our (single) Exchange 2010 Enterprise server.
This was needed to fix the WebApp Light issue with IE11 and to fix the problem where users were unsable to delete mails sent from multifunctionals.
These 2 issues were fixed by installing the hotfix rollup pack, but now our users have different problems...
Some users (not all of them, haven't found a common denominator yet) report that they don't see new mails in their Outlook 2010 box, even though they got the envelope notifier.
When they change folder and back to the Inbox the new mail is suddenly visible.
Same sort of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.
Some users also report that they see delegated mailboxes (mailboxes from other users that they have full mailbox access to) twice in their Outlook 2010.
Outlook 2010 is running in online mode (because it's running on terminal/citrix servers), so it's no issue with caching as far as I understand.
I've already checked if there are any updates for Outlook available, but we've installed them all already.
I though I'd found something:
Noticed a lot of errors in the application log on the Exchange Server which pointed me to this:
http://theintegrity.co.uk/2010/08/mapi-session-exceeded-the-maximum-of-500-objects-of-type-objtfolder/
I've added the registry values now with a value of 1500, but unfortunately this didn't help.
The errors in the eventlog are gone, but even after restarting the IS some users still have these problems.
One user reported that it takes about 7 minutes for a read mail to actually switch to "read" when looking at his inbox.
Did anyone else notice these problems? And maybe have a fix for them?
I really don't want to roll back the update :(
I even rebooted the Exchange Server after installing the rollup even though that wasn't even necessary
Thanks in advance!
Regards,
Jeroen

Correct - http://support.microsoft.com/kb/2925273 discusses this issue.
If you do raise a support case to request this, please ensure that you review and understand the requirements for IU installation and removal.
For example:   You *MUST* manually remove it prior to installing Exchange 2010 SP3 RU6.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

CD Driver Issues after installing 11.1.4

After installing Itunes 11.1.4, my HP computer, running Windows 7, could no longer find the CD drive. Upon investigation, someone suggested I update my registry to remove some entries. I did the following:
Start, enter regedit in search bar,
Open regedit
Left hand menus click HKEY_LOCAL_MACHINE
SYSTEM
CURRENT CONTROL SET
CONTROL
CLASS
Then need to find {4D36E965-E325........... (are more figures but not needed)
on right hand window see if there is an upper filter or lower filter.....right click and delete the values if either are there.
RESTART...
This worked, but now Itunes complains every time I open it, saying some registry settings are missing for my CD drivers. I've used Itunes on this computer succssessfully for years, until this upgrade. Apple, whatever you did, please undo it. Horrible release...

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Any one or a combo may help
Give your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
Try a different USB cord
Try a different USB port
Try rebooting your computer
Try closing/opening iTunes.
If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?

Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

BSOD after installing Boot Camp, AMD Radeon 6630M driver issue

I have reinstalled Windows using Boot Camp twice now and get a blue screen right after installing the Boot Camp drivers and restarting.
I am installing Windows 7 Ultimate 64-bit on my Mac mini 2011 edition. I created an install disk in Lion and used the option to copy the Boot Camp drivers into the disk.
I have narrowed the problem down to Apple's driver for the AMD Radeon 6630M graphics which my Mac mini has. The driver will install without errors but then the blue screen appears on next startup. If I use safe mode to uninstall the AMD driver, the blue screen goes away, but the display resolution is very low.
I checked for driver updates from AMD, but there are none for the 6630M.
Anyone else having this issue?

Hi,
I have installed Windows using Boot Camp and I also get the blue screen of death right after installing the Boot Camp drivers and restarting.
I am installing Windows 7 Ultimate 64-bit on a i7 Mac mini 2011 edition. I created the USB install thumb within Lion's Boot Camp, and got downloaded the latest Bootcamp drivers (bootcamp 4.0). I connect the mac mini to a 24" iiyama screen with a HDMI cable. I don't have a DVI cable anymore unless i would have checked that point too.
I have also narrowed the problem down to Apple's driver for the AMD Radeon 6630M graphics which my Mac mini also has. The driver will install without errors but then the blue screen appears on next startup. If I use safe mode to uninstall the AMD driver or renaming the atikmdag.sys file (the main cause of the crash), the blue screen goes away, but the display can't get the effects such as Aero interface.
AMD provides official drivers that don't recognize its own 6630m graphic card with Apple, then doesn't install any up-to-date driver... Only Apple's AtiGraphics setup program will install the drivers...but it makes Windows 7 crash at each boot.
Thanks for your technical skills or info to come over this issue (or releasing a bootcamp update ?)

Issues with DNG Flat Field Plug-in after installing updates

Hello,
First of all many thanks to the Lightroom-team for making the DND Flat Field Plug-in available. I am using it to correct images taken with non-retrofocus M-mount lenses on a Sony NEX-7. I have previously used CornerFix, which worked fine, but the workflow in conjunction with Lighroom isn't really convenient.
Now to the issue I am facing: initially, the plug-in worked very well, but after installing all recent CS6 updates, I am now receiving the following after selecting the reference image:
A new DNG-file is still created, with some adjustments being made, but it looks like not all vignetting and color casts are being corrected. After dismissing the above message, Lightroom keeps showing the flat field correction task as still in progress:
This can be cancelled, and I can continue to use LR without any problems. When I attempt another flat field correction, I face the same issue.
Has anyone else experienced this issue? And is it possibly correlated with the installation of a specific CS6 update (of which there have been quite a few over the past week or so)?
I should probably note that I'm running LR 4.2 on Mac OS X 10.7.5 and a Mac Pro 2008 with 24GB RAM.
TIA for any feedback!
Best,
Ron

I had the exact same issue with LR4.2, that is until yesterday. Then I did not get the error but I did not get the flat field image either. All I got was the original image indicating that it was in a group of two but the second image was not there. Tried synchronize but no image was indicated.as available. Processing did not hang and indicated that it went to completion. Must be a problem with 4.2 as it worked with 4.1. With 4.1 I got no grouping, just a new file with "ff" appended to the name.
Asside: I am using a shift adapter with a E-M5 and 28mm OM legacy lens. I shoot three images for a pano, then set the shift back to starting point and shoot three flat field image. Problem (not Adobe's fault) it that I often forget to shoot the flat fliel images. Break down to move on and then realize - Oh Crap! When I remember and using 4.1 it works well.
Larry

Facetime issue - after installing a new logic board due to liquid damage.

I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
i tried connection to my phones hotspot - didn't work.
i also went to the firewall thing to allow it recieve cennections..
pleassee help!!
is there a way to reinstall the facetime or something?!?!?!

My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord. If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks. I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system. It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

After installing a windows7, SAPGui disconnection issue!!

Similar Messages

Maybe you are looking for