After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?
After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.
You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps
Similar Messages
-
I was upgrading my iPhone 4 to iOS 5. The old files in my profile backed up. When relaunching the iPhone, I decided to create new profile on the iPhone, thinking I could copy my old contacts from the old profile (as iCloud seems to merge all contacts). When the ne profile was created on the iPhone, the old profile on iTunes disappared without a trace. Please help restore my contacts.
Did you use the Profile Manager or did you use reset to create that new profile?
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
A reset tries to import some data from the old profile and then moves the profile to the desktop, but if you use the Profile Manager then you need to copy that data yourself to the new profile.
If you've deleted the old profile before making sure that your data has been recovered then you've lost that personal data.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Management agent upgraded to 10.2.0.4 - getting error Failed to start LSNR
Hi all,
I have just upgraded the management agent upgradation to 10.2.0.4. I am getting this error error 'Failed to start HTTP listener.'
I had killed the agent process at the o/s level and restarted it but again after a while it shuts down automatically.
Also my emctl status agent still shows the agent version as 10.2.0.2 ??? Please let me know what to do in this scenario.
Will appreciate your early response. ... Thanks & Regards, Deepakcan you report the status of this command and screen output
./emctl status agent
Ss -
I have goot some issue with my Macbook i7, I am not able to start my Macboook its keep showing the Grey screen after login.
I have done something where I have successully taken the OS backup on External Hardrive which was saying computer will start automatically. After this I founded a Fresh new computer but may be that was running on External hard drive.
I am **** confuse what should I do next?
Anyhelp wold be great......Delete the user account, then use the "Erase Free Space" option in the Erase tab of Disk Utility to write zeroes to the drive. Stick with the "Fastest" method (one pass of zeroes) unless you're hiding secrets from the NSA - anything more stringent is a waste of time.
Matt -
HT201444 latest version of itunes but i still keep getting error 4014
I keep getting error 4014 i have changed cable installed latest version of itunes but i am still getting error 4014
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?
Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?
If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.
-
my problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications
I had a similar issue and I was told that my iTunes match was on.
I had to disable iTunes match on my iPhone.
Following which - after you plugged in your iPhone to iTunes, select your iPhone on iTunes menu. You should see a summary page of your iPhone where it provides options to update or restore. On the bottom there should be an option to select "sync only selected music/playlists". I can't remember the exact wording. Once that's been checked, select your iPhone's music tab and it should allow you to select the music playlists you want to sync. -
my computer crashed and had to be restored to factory settings losing ituness collection of music. My ipad has my itunes library. how do i get the music collection from the ipad to the computer?
You should be able to copy iTunes purchases over to your computer's iTunes via File > Devices > Transfer Purchases. For music from other sources (e.g. copied from CDs) you will need a third-party program to copy them back from your iPad - there are some listed half-way down this page which should work : https://discussions.apple.com/docs/DOC-3991
-
My iPhone 4 has become dead slow after the iOS upgrade. Any pointers pls?
Hello All,
My iPhone 4 has become dead slow after the iOS upgrade. I use the phone for business purpose and it has become painful to use the phone becuase of the poor performance.
I don't want to change phones based on iOS releases. Any suggestions would be appreciated.
Thanks,
AmritHow to update my iPhone4,iOS 7.0.6
-
Listen, I bought today in Israeli society is based
IPhone 4 version of 4.3.5
What I want to upgrade to IOS 5 ITUNES
Legally, but it gives me error 3194
What do you do?
Please Contact me
[email protected]Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users. -
BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition
Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?
Hi
A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory settings before you tried other options . And most imported du you have an iCloud backup.
//Sorenc
Maybe you are looking for
-
Size limit for XMP metadata to be added externally to a file's metadata
Hi, There is a situation where I need to add some 'text data' to the metadata of Adobe Illustrator document, in XMP format. The data being added is in the form of Array Item. While adding the data, I found that, after certain limit, the data addition
-
Jar file in web-inf\lib is not being loaded - weblogic 7.0
I am callling a webservice from a jsp. everything works fine if I keep the interface classes under web-inf\classes....but If I put the interface classes in a jar file and put it under web-inf\lib, then weblogic does not seem to find that.... I am get
-
No network card lights fron or back OUT
I cant connect wired or wirelss It was working but now it doesnt, Been messing with it for hours. The wireless light on the front is out. And the Led on the network card is out even when connected with a cat 5. I tried serveal cables.
-
Problem with Self defined info structure.
Hi All, We have Create some Self define Info structure Like ;-- S061 Location and Planning --->S501 S062 object class and manufacturer --->S502 S063 Danage analysis --->S503 S065 Object Statistics
-
Hi, We have ECC installed in our environment. I see that it also has options for BI under Information Systems. But I see that standard contents which are avaialble is a very small subset of SAP-BI. Does anyone have any idea on use of BI features buil