After paste attributes(transform and crop), it is strange crop...

Hi everybody~
I did copy from one clip and then paste attributes to same positon, scale , and crop.
But after that, like that above image, crop is problem.
Of course I replaced source clip again and no problem.
But I want to know why that problem occured.
Help me~

What about the frame size of the project?
I tried with two clip recorded with my MBP's iSight camera (at 640x480).
On a 640x480 project, I could not make the problem occur. Paste atributes worked correctly.
On an 1080p project, the problem manifested itself. It seems that pasting atributes somehow messes up the spatial conform parameter: while it still shows as "Fit", it appears as if it were set to "None", as far as I can tell.
(Of course, such an error has not effect when the dimensions of the clip coincide with those of the project it is in).

Similar Messages

Clip is flipped after pasting "scale"

After choosing "Paste Attributes...", my clip is flipped (mirrored horizontally). Here's what I do:
Clip A is scaled down smaller than full-screen, and positioned off-center (to the right).
I want clip B to be identical in size and position.
Select clip A
Choose Copy
Select clip B
Choose "Paste Attributes..."
Results:
If I check the Transform box, clip B is sized and positioned identical to clip A, but it displays flipped, or mirrored horizontally. For example, the person in the clilp had walked from right to left. After pasting attributes, they now walk from left to right.
If I only check only the Position box, clip B does align correctly with clip A (off to the right) - and it is NOT flipped (mirrored).
If I only check the Scale box, clip B scales to the size of clip A, remains centered, but it is flipped.
If I flip clip B before pasting attributes, it remains flipped afterwards.
What am I doing wrong?
I don't want to flip clip B after pasting attributes, unless someone can tell me how to make it snap to the exact width of clip A.
Thank you,
Bart

Under "Scale" in the inspector, after opening the small triangle to view X and Y values, I did find X to be negative. Changing it to positive restored clip B to its un-flipped state. Thank you, Russ. I appreciate such quick replies from both you and Luis.
Bart

Master Data: Transformation and DTP for compounded characteristic

Good day
Please assist, I am not sure what is the correct way.
I extract master data from a db via DB connect.
There are three fields in the db view for extraction. (1) Code (2) Kind and (3) Code Text.
What I have done is the following. I created a datasource with transformation and DTP for master data text for (1) and (3), and then a datasource master data attribute transformation and DTP for (1) and (3).
Is this the correct way to handle extracts of compounded characteristics?
Your assistance ill be appreciated.
Thanks
Cj

Hello,
if the char ' Code' is compounded with 'Kind'.
then for text datasource u shld have 1, 2 and 3. the table for this datasource should have 'code' and 'kind' as keys.
for the attribute datasource u shld have 1 ,2 followed by the reqd attributes of 'Code'.
Reagrds,
Dhanya

After upgrade to FCPX 10.1, paste attributes no longer works. Has any one had a similar experience or have an answer?

After upgrade to FCPX 10.1, paste attributes no longer works. Has anyone had this issue or have an answer to it?

Are you sure it does not work at all? Could be a problem with a particular project, or clip.
Create a completely new project, add some clips to it, Cmd-C in one clip, and try Paste Atributes into another. Does it not work?
Also, by "does not work" do you mean it is greyed out, or the window appears but nothing happens when you click "Paste"?

Can You Copy and Paste Attributes in FCPX?

I'm just getting started with my FCPX training, (after years of edidting in FCP). I frequntly use the "copy and paste attributes" feature in FCP, (say you make some adjustments to a clip, you can copy these attributes and paste them on to another clip). VERY SLICK and USFULL. Does anybody know how this is done in FCPX? Thanks

Similar though you don't have the same level of control as you'll notice. Copy the clip you want to use as the source and then Paste Effects- both from the Edit menu. This will copy over everything so plan things out if you want to use this feature.

Inactive transformations and DTPs after running BDLS

Hi Experts
I ran the BDLS job, Restored , Activated and Replicated the S.S.
Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION " although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module /SDF/AL_MAP_TRANSID_LOGH does not exist." I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
Please advice
Thanks
PK

Prabu,
have you solved this issue?
I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
Please let us know how you solved it.
Appreciate your response
Shashi
Update:
Note# 1142908 fixed my issue..
Shashi
Edited by: Shashi on Sep 10, 2008 7:22 PM

Copying and pasting attributes and styles of text track

Simple question,
I have two text tracks and would like to copy and pasts the attributes and style tabs in "inspector" to another text track. How could I do this without having to manually set each individual track as I create it.
Thanks,

Did you check the opacity value in the paste attributes dialog?

Copy and Paste Attributes

Is it possible to cut and paste attributes between Soundtrack Pro projects?

If I understand your question correctly, then Yes, there is a very easy way to copy the attributes from one object (or text sample) to another:
In the Toolbar at the top of our Editing Window, there should be two icons: Copy Style and Paste Style. If you don't see them, then you need to go to the View Menu and select Customize Toolbar; here you can select and drag these (and any other tools you want to add) into your Toolbar.
Once you have these tools available, all you need to do is select any object, click the Copy tool to capture the style (attributes) and then when you select another object, click the Paste tool to apply them. This also works, as mentioned above, with text.
Good luck.
Message was edited by: Ron Streicher

Cannot copy/paste between X11 and Aqua after 10.5.7 update

I'm stumped. After updating to 10.5.7 I am unable to cut/paste between xterm and Text Editor or any other Aqua-based app (email, browser, etc...). I can cut/paste between Aqua apps. And I can cut/paste between X11 apps, but X11 <-> Aqua just does not work. Commands pbpaste and pbcopy work great and are a temp fix, but I cannot work this way much longer. Going back to Linux is looking more and more attractive.
Thanks.

Put the image on a server and use the html code
Create another user account and see if X11 behaves normally in the new account. If it does, you know the problem must then reside in your own configuration settings.

Free Transform and Crop Crosshair

What is the Free Transform and Crop Crosshair used for?
Whenever I transform an image or crop an image it shows up in the center of the image. Is this used as a refrence to the center of your image or can you do more with it?
I notice that you can move the crosshair around, which makes it even more confusing to me.

The crosshair is the point around which a rotation will be made (the roatate point). You can move it to change the point of rotation in a transform or crop.

Scale Attribute Times and Paste Attributes not working as did before

Using Copy and then Paste Attributes as I have done many times before upgrading the FCP 5, the option to "Scale Attribute Times" is grayed out and the keyframes are not placed correctly. This happens even if the cips are the exact same duration. I read a post from November that states that this feature is not working is FCP 5. If that is so, has anybody found a work-around or know of a fix?
Dual 1.25 G4 Mac OS X (10.3.9) FCP 5.0.1

The problem is that the content is replaced correctly but the keyframes move (they were originally at the beginning and end and now they are not). The "Scale Attribute times" box is grayed out.
I just tested this out and, from what I can tell, FCP (5) now needs Timecode to match in order for Paste Attributes > Content (with keyframes intact) to work as we'd like.
I placed a 10 sec image - with (the default settings of) In at 1:00:00;00 and Out at 1:00:09;29 - in the Timeline. I set keyframes for Scale & Rotation at the In and Out points (100% & 0 degrees -> 200% & 360 degrees)
When using the Paste Attributes > Content method with a second image having identical timecode In & Out, it works fine.
However, if the second clip's timecode is not the same - say In is set at 1:00:02;00 and Out set at 1:00:11;29 - then the content will be pasted but the keyframes will not adjust for the new timecode. They remain at the first clip's points (that is,1:00:00;00 and 1:00:09;29).
So, you can try to match timecode (which isn't always convenient) or you can...
Select the first clip & copy
Overwrite/replace the (first) clip with the second clip
Paste Attributes > Basic Motion (or whatever attributes you're pasting, except Content)
Or was that a workflow you were hoping to avoid?

TS1702 I just redeemed my code to download a movie into iTunes and after it downloaded now it doesn't go past the terms and conditions and to watching my downloaded movie...

Can anyone help me get past the terms and conditions?

If you are seeing the Ts & Cs link in the Downloads tab in the iPad's iTunes app then that just means that you don't have any outstanding/queued downloads - your film should have downloaded into the Videos app (iTunes on the iPad is just the iTunes store) :

HT4623 I have done an iCloud download but now cannot get past the Terms and Conditions page, even after accepting. It's just a revolving door!

I have downloaded an updated version of iCloud but cannot get past the Terms and Conditions pages, notwithstanding accepting them. Further, I cannot get back into iTunes.

Since I do not know what you actually did maybe:
http://syncor.blogspot.com/2013/09/ios7-and-missing-agree-button.html
Otherwise:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the account from the iPod and then sign back in.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When i cut and paste an article or link ..after pasting the link it disappears/want enter ..why?

IGO TO AN ARTICLE ..COPY IT OR LINK THEN GO TO A FORUM TO PASTE .IPASTE ..AND THEN THE ENTRY DISAPPEARS . REDO , DISAPPEARS ..AT FIRST ITHOUGHT SOME ONE WAS REMOVING MY POSTS ..THEN ANOTHER FORUM CAME UP AND SAID fire Fox NEEDS YOU TO GO FIREFOX PROFILE DIRECTORY ???AND ALLOW PROTOCOL BY ENTERING POLICY CODE..wtf !!!..ALREADY YOU HAVE TO DO THINGS TO ALLOW ..AT THIS RATE i THINK i WILL RETURN TO WINDOWS ..SO MUCH EASIER THAN ALL THE BLOCKS PUT IN PLACE BY FIREFOX ..THE AMOUNT OF TIMES i HAVE TO RENTER TO ALLOW AN UPDATE ON ADOBE FLASH PLAYER IS RIDICULOUS

I marked and copied this;
'''Nuncio urges bishops to witness the Faith to young people'''
This is what was pasted;
Nuncio urges bishops to witness the Faith to young people - See more at: https://www.osv.com/OSVNewsweekly/ByIssue/Article/TabId/735/ArtMID/13636/ArticleID/16393/Nuncio-urges-bishops-to-witness-the-Faith-to-young-people.aspx#sthash.D3iYiB2H.nNtj5A3E.dpuf
It has something to do with the web page itself.

How can I keep my text format after pasting a text with a different format?

No matter when and where I start to write some text (whether it is a SImpleText, E-Mails, or anyother application's doc), if I have to cut and paste a text from a different source that is formatted differently than my original text (ie. the one I am already using ), once I have pasted the differently formatted text in my doc, the typeset changes while it continues to type with the same formatt used in the text I just pasted.
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
What I have been doing to avoid this problem is: I usually type my entire text content (whether it is an E-Mail, or other doc) then, once I am done typing, I paste the text that was cut from a differently formatted document, so that my text remains with the same formatt in its integrity, while the pasted text stands out differently, but it is a bit complex doing that , because I not only have to remember to paste the other text when I am done typing (I run the risk of forgetting to paste the text I need to insert--which has happened already) or I keep struggling with my formatt change after the pasting of the new text, so my document text starts looking like the same text as the one which was just pasted.
Thanks for your time reading this!

KerrBr wrote:
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
(1) First, let's make sure we're talking about the same thing. By "SImpleText, E-Mails" you mean TextEdit and Mail, right?
(2) Some apps (TextEdit, Mail) use the text engine provided by Mac OS X. By and large, these apps will behave in a similar manner. Others (eg, MS Word) use their own text engine, and their behaviour can be quite different. For such an app you need to consult its manual.
(3) In TextEdit, if you want the pasted text to adopt the current style, then use kurt188's tip.
(4) However, if you may want the pasted text to retain its own attributes, while you continue to type in the previous style. I don't know of any shortcut or command that will achieve this. However, you can try to work around it.
(4.1) TextEdit has the Copy Style (⌘⌥C) and Paste Style (⌘⌥V) commands. If you haven't yet used it, ⌘⌥V will insert the default style. So type, paste, ⌘⌥V, then continue typing. If you have used, it will insert whatever style was copied. You can, type, ⌘V, click somewhere before the pasted text, ⌘⌥C, click after the pasted text, ⌘⌥V, and continue typing.
(4.2) Alternatively, type your text. Then type one more character, eg, "x". Then ←, ⌘V, ⇧→, and start typing. The new text should adopt "x"'s format. (This should work in Mail, too. I don't know, because IMHO e-mail should always be plain text.)

After paste attributes(transform and crop), it is strange crop...

Similar Messages

Maybe you are looking for