After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube

After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube.
The video in FCPX looks fine, But when I load it the photos will play over top of each other or double play.

Export your project as Quick Time Current Settings by choosing Export Media in the Share menu. See if the movie plays correctly in QT Player. If it does, upload that to Web.
Russ

Similar Messages

Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

Trying to drag photo into iMovie project, It shows the correct picture in the time line but plays the adjacent picture in the viewer ?

trying to drag second set of photos into project. It shows the correct picture in the time line but plays the adjacent,previously imported,picture in the viewer

I notice that in the photo then has a tick in top left corner.
Please describe in other words - or add a screen photo so that I get it.
Howto trash the iMovie pref files - they are two or more.
• Delete iMovie pref. file
iMovie pref. file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
Yours Bengt W

How do I get my file into the time line in Premiere Pro CC?

How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

Hi Aneumann,
Welcome to the Forums.
You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
Regards,
Vinay

J pegs into the time line

I have been dragging J Peg photos into the time line from a Google search on the internet. Mostly photos of old ships. Could someone tell me why some work and show nice and clear while many others turn quite "fuzzy" when you press play?
Thanks

Most likely it because of the size of the image. FCP scales the image to fill the screen. Small images will be scaled up a great deal and will become soft.
Also make sure you're looking at the rendered output with playback preference set to high quality.

How do I get the full size of my pics or video into the time line?

Greetings,
I've nener been part of a forum before and an wondering if this will actually be taken seriously. I'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). Would someone please advise me as to how I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
Regards,
The Powered Parachute Guy

Click the NEW ITEM link on reply page #5 in the PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
Also read below...
Some of this is from the Premiere Elements forum, but the idea of sizing pictures is the same for PPro or Encore
Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PPro Crash http://forums.adobe.com/thread/879967

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved" ones before I write the new one. What to do to finally/definitely delete the save

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?

sorry it's ios6

My captured video is all mixed up in the time line after capture

hi after i capture my video it gets all mixed up in the time line nothing is in the right order and it is all cut up. I don't know what happened I have successfully exported a video to idvd before and published it but when i tried to again this happened
if anyone can help thanks

I have the identical issue. Open a project that was fine 12 hours earlier. Now I open the project and all my clips and subclips show up in the browser, but the timeline is empty. Click on sequence 1 - empty. I tried switching my scratch disk from the original external drive to another one that was a mirror copy of the first - changed the scratch disk location. Then had the issue with no sequence data in the timeline. Reverted to original external drive and scratch disk location. Same problem - no sequence data. I can open other previous projects and they're fine. I don't have multiple sequences in my projects - I just build in the timeline, if that has anything to do with the problem. This is very strange. Appreciate any help anyone has.

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How to reclaim spare space back at the end of my clips on the time line

When I have edited stuff on the time line I find that through moving clips around that I have an empty space after my collection of clips that I have arranged. How do I reclaim that empty space back so that where my clips end so does the time line.
I have tried saving the project and reopening it but this does not seem to do anything as I still have the space left.
Any help would be gratefully received Thanx ahead of time.

Control click on the empty space and, on the drop down menu, click on Convert Empty Space to Clip. Then, delete the clip you just created.
If the empty space is at the end of your movie, you can do the same as above. But, if your playhead still continues moving past the end of the movie, then expand your time line as wide as possible and check down your time line for little bits of clips left over from editing, and delete those. Any audio that extends past your video clips at the end of the movie should be trimmed back as well, even if you have muted them.

Sliding video clips along the time line

Quite often as I edit, I like to place clips in the time line forward of my current edit point. For example I might find a shot that works well with a musical swell or beat 30 seconds down the track. With the magnetic time line, I can't slide that shot to the point on the time line without the shot wanting to ping back to the final edit in the time line, or you have to insert place holders or slug. Any ideas for a quick easy way to slid clips?

I had that problem. Solution for me is to take your cursor and not just drag the stuck clips laterally parallel but lift them up slighly in above the time line and move them in any direction. The connecting thin vertical blue line line will still be attached to the TL but some how lifting them up slghtly allows you to drag them anywhere into the TL.
Skyler
San Francisco

I want to change the time line in Audition CS6 to display a 24hr time

I have a file I need to aline to a particular time in a 24hr time format. I can see that I can change it many ways to do with music and video but I use Audition for a different purpose. I need to set the time line to display something similar to a 24hr clock so I can edit a file. Is this possbile?

Ryan, the decimal format in Audition reads mm:ss.ddd where I need it to read hh:mm:ss:ms - and with a repeating 24hr period. Adobe is aware that it's products are used for more than editing design, film and music...it would be nice for them to have something more suitable.
My solution it to upload the audio file into Premier, add markers where the relevant times are (after calculating the times to a straight time line) and then export to Audition. It's a lot of work for a large number of files.
If the time line was more adaptable it would have saved me hours of extra work!
Thanks for your help anyway.

CS4: How can I copy named potions of the time line to the projects panel?

I am trying to copy named portion of my time line to the project panel & I can't past the segment.
I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
How can I copy named potions of the time line to the projects panel?

I found a way albeit a tedious method:
positioned the render bar( I do not know the proper name) to encompass each segment separately.
Exported that segment to Media.
Media in turn transferred the segment to the Media Encoder program.
The Media Encoder, after processing the segments, deposited the files in a temporary folder.
Lastly, imported the content of the folder to the Project Panel,
Thank you for all your suggestions.

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
Andy

How do I move a photo into an album in the new Photos application?

How do I move a photo into an album in the new Photos application?

The simplest way is to show the Sidebar at all times - you can reveal it with options-command-S ⌥⌘S.
With the sidebar visible, you can simply drag the photos from the Moments or other albums to the album in the sidebar. You can select and drag multiple photos at a time by selecting the first photo, holding down the shift key and selecting more photos. If the album does not yet exist, select the photos and press ⌘N for "File > New album" to create a new album with the selected photos.

After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube

Similar Messages

Maybe you are looking for