After Quantum upgrade client box channels won't change & press C to change modes message?

I press the remote and it just stays on the same channel. The only fix is a reboot. The issue comes back after a time even after reboots. Also what is the message on the info banner after you change channels that says press c to change modes?
Who tested this latetes mess of an update???

This is also a problem for me.
This is how I describe it:
This happens pretty regularly on one of my non-DVR digital set top boxes.
After it is rebooted I can use the guide to change channels. I can browse channel line up and use the SELECT button on my remote to change the channel.
HOWEVER, many times the guide "gets stuck" and I can no longer view the guide and use the select button on the remote to change the channel.
The behavior is that no matter what channel you are watching (for example MSNBC), when you use the guide in the Favorites View mode, and you select a different channel from the guide, the channel changes to the first channel in your favorites list.
There is no easy fix. I reboot the router and it doesn't necessarily fix the problem.
Sometimes rebooting the router and the set top box at the same time fixes the problem, but usually not.
This makes the guide totally useless.

Similar Messages

HT1925 I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.

After OS Upgrade, Computer will No Longer Boot from Disc, Enter T-Disc Mode

I purchased the Leopard update about a week ago and proceeded to install it (upgrade option) on my MacBook Pro previously running Tiger. After this update, I no longer seem to be able to boot from a disc(c on startup), enter target disc mode(t on startup), enter single user mode(command s on startup), basically anything that requires hitting a key on boot. In short, the operating system seems to override any of those commands and just loads regardless of what I press.
How can I fix this?? I fear that if my mac suddenly dies, I won't be able to fix it with archive and install via the CD, since I can't boot from it. I also won't be able to recover my files with target disc mode or anything.
For more in-depth details:
-My hard drive does have an open firmware password- it was recommended as part of the undercover anti-theft program that I use. Although I can tell putting the password on was a mistake, since I've read that single user mode is no longer accessible with this password active. I don't think this is affecting my inability to boot from disc or target disc mode though, as I was always able to do this with Tiger, even with the firmware password active.
-I have tried booting from other discs, like my old tiger OS disc that came with the laptop- that fails too.
-My Leopard installation was not clean. Like many others, I used the upgrade option and it appeared to work ok- until restart, where I was faced with the blue screen. Since I was unable to boot to single user mode and try removing potential APE files, I let the computer sit for an hour on the blue screen until it finally loaded. Upon getting in, I found that I did not even have APE's installed. I proceeded to reinstall the operating system via an Archive & Install. Upon boot after this reinstall, I still received a blue screen that lasted a long time, and the OS loaded very slow. It did this for a few additional boots afterwards, and has appeared to smooth itself out now, a week later. The OS now loads fine and works alright (from what I can see), but I still can not boot from disc or anything else.
If anyone at all knows a solution for this, it would be much appreciated. I wanted to suspect something like the disc drive going bad, but being that things like the target-disc mode aren't working either- I'm hesitant to believe its just the disc drive. Being that it also happened just as I upgraded to Leopard and faced issues, I have more of a hunch that its something to do with Leopard.
I apologize if this has been answered before, but I've looked all over the site, google, everywhere I could think of and came up with no answer.
Thanks ~Brian

Hi, I have been having the exact same problem with a late 2011 MBP 15 inch. I replaced the hard drive with a samsung SSD 1.5 years ago, along with a samsung SSD in the optical drive. It worked great until the Yosemite upgrade. The MBP seemed to work reasonably well for a few days after the upgrade, but then it started stalling on various programs (spinning beach ball on Mail, Safari, etc). Start-ups were also longer and had a loading bar each time, which was new since the upgrade. I left the MBP to sleep last night and when opening it, it crashed and tried to restart. On restart it loads to the login screen, then after I enter the password it partially loads (based on the loading bar), then shuts off. I removed the SSD and plugged it in with a USG, but that didn't change anything. Here is a picture after using CMD-V before it shuts off.

Mail won't send after Lion upgrade and AT&T won't help

I upgraded my new MBP to Lion and now I can't send mail if I'm on my network at home. After looking at other threads (like this one: https://discussions.apple.com/thread/3192956) and based on the symptoms I'm having, I think the problem is likely an AT&T problem. When I use the Lion laptop on a different network, mail works and I can send mail with no problems. That suggests to me that the network is the issue.
I called AT&T to tell them this and they feel everything is working on their end so it must be my email client. They want to charge me to talk to tech support because I'm using an email client instead of their web interface.
Does anyone using AT&T have the same problem? Does anybody know how you get through to a big company like AT&T who isn't listening?

Hey Kerry,
Believe it or not, sending mail from home seems to now be working for me. The strange thing is that when I made the change I'll tell you about, it didn't work at first, but now it does. The only explanation I can think of is that I've rebooted my machine since I made the change and that seems to have made the difference.
Anyway, here's what I did. In Mail, go to File > Preferences > Accounts. Now, select the account in the left pane if it isn't already selected. In the main pane at the bottom you should see an option for TLS Certificate. Mine had 'None' selected so I opened the combo box and saw there was a certificate I could choose (just a big long string of numbers and letters). I chose that, saved my changes, and that was it.
Like I said, nothing changed immediately after I did this yesterday. But this morning, I can now send mail. So either this change (and a reboot) fixed the problem for me or coincidentally AT&T fixed the issue on their side - I don't know.
Give this a shot and let me know what happens.
Jim

I cant open firefox after an upgrade only box says to restart computer which i have 10 times

a box came up to upgrade firefox i did, now everytime i click on firefox icon from desktop its keeps saying "Your computer must be restarted to complete the upgrade of firefox. Do you want to restart now.
ok I HAVE DONE THIS 20 TIMES AND STILL NOTHING PLEASE HELP

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

I installed yosemite without issues on my 2013 macbook pro retina so decided to try it on my 2013 27" imac. Install went fine until I get to login screen. Wireless keyboard and mouse won't pair so I can't type in password. Connected generic wired keyboard and mouse and still won't recognize it.
However, when I restart it I can hold down option on keyboard and it will bring up list of hard drives to boot from (I also have windows installed with bootcamp) so I know imac pairs the key

So the iMac was purchased by my father in 2011 shortly before he died. I thought, why not check if he also purchased Applecare at the same time? Turns out he did! So after calling and trying to reset the SMC, etc. with it not working the Apple tech told me to turn it over to an authorized repair shop here in Louisiana. Hopefully they can fix it.

Upgrading to better speeds after exchange upgraded...

Hey,
My exchange has been marked as on the 21NC for probably close to a year now however I never got a speed boost after the upgrade. I figured my download speed might not of changed because of the SNR but my upload speed should of? So I assume the speed is still capped at the "upto 8Mb"?
DSL Modulation Mode:
G.992.5 (ADSL2+)
DSL Path Mode:
FAST
Downstream Rate:
5280 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
12 db
Upstream Margin:
23 db
Switching modem to to regular ADSL results in roughly the same speeds.
DSL Modulation Mode:
G.992.1 (G.DMT)
DSL Path Mode:
FAST
Downstream Rate:
5504 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
10 db
Upstream Margin:
23 db
So anyway to change from ADSLMax to ADSL2+ speeds? I'm quite a old customer so I have my own network equipment and only have a first gen BT Homehub laying around somewhere.

Using a Linksys AM200 modem. When you let the DSLAM set the mode unfortunately it doesn't actually tell me what mode it is in.
DSL Status:
UP
DSL Modulation Mode:
Auto
DSL Path Mode:
FAST
Downstream Rate:
6016 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
12 db
Upstream Margin:
23 db
Downstream Line Attenuation:
41
Upstream Line Attenuation:
23
Downstream Transmit Power:
19
Upstream Transmit Power:
12
LOS Errors:
0
As far as I know a 'multimode box' is only present with fiber?

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. heeeeelp!

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

joycesalvador wrote:
... But I can't activate it after the upgrade. what to do?
See this discussion.
https://discussions.apple.com/message/21189708

Odd Problems After Leopard Upgrade

I upgraded to Leopard a couple of weeks ago. All seemed fine until I began to notice a few odd things.....
1. Disk Permissions - If I select 'Verify/Repair Permissions' the disk utility began with the blue hatched bar and just stayed like that. I upgraded to 10.5.1 and now it progresses to the solid blue progress bar and says 'one minute remaining' but it makes no further progress. Same happens if I select 'Verify Disk'
2. No volume icon in the menu bar. It was there after the upgrade to 10.5 but yesterday I pressed the 'mute' button and the volume icon disappeared - it's been missing ever since and now I'v no volume.
3. MS Office 2002. I can see MS Office files - I can even preview them, but if I attempt to open them nothing happens. If I attempt to open the relevant MS app the icon just bounces once in the dock and then nothing.
It's worth noting that there are two users on my PB (both have admin status) but problem 3 only occurs in my user profile.
The other user is my wife and she's not the sort to mess with the computer - she just uses it.
can anyone shed any light on this as I'm seriously (and reluctantly) considering downgrading to Tiger.
Thanks in advance,
Seán.

Yo dude!
I think it's time to boot from the start-up dvd, run disk utility repair (always before an upgrade!), re-install (keep previous install just in case), restart, run all updates. Maybe if you have old software, it's time to un-install them and re-stall one by one until something untoward happens. I've been using Leopard on three macs without hitches.. I find it very stable. Current version is 10.5.2, quite soon since last update, so they're (apple) obviously fixing a few things. The only problem I had after upgrading to Leopard was some apps wouldn't hide (command-H) even from the menu, but sorted that by re-installing them after the leopard upgrade,.... hunky dory now.
Don't panic, there is always something silly causing bad **** to happen, 95% of the time it's software..
See you on Wednesday dude...... I'll bring up those disks I borrowed from you.....
dezzzzzzzzzz

After MAR upgrade from 4.0 - 7.0 login to ars_db fails

Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
Whity

Hello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar

Missing album artwork after iOS5 upgrade!!

After I upgraded my iPhone, everything went smoothly, all my apps where there, text messages, emails etc. Even all my music was there but I noticed that random album artworks were missing. I connected it iTunes and clicked "sync" and it showed at the top that it was syncing a numerous amount of album artworks to my phone, so I thought it fixed the problem but I check my phone and it didn't. The weird thing is that all the album artworks show in my iTunes library and playlists but not on my phone!! I tried restarting my phone and manually clicking "get album artwork" in iTunes, nothing has worked. Furthermore, these artworks aren't custom or added by me, I purchased all on iTunes, so I know that isn't the problem. I really don't want to resort to restoring my phone due to having to reoragnize everything on it, but if I have to, I will. PLEASE HELP ME!! Thanks.

If the artwork is OK on your computer you may be able to solve your problem by removing all your music and then resync it back to your iPad.

Shortcuts for messages don't work after iOS upgrade

After having upgraded to the most recent iOS, my shortcuts don't work in messages and mails anymore. Has anyone else had the same experience?

Well, it's telling you that the datset doesn't exist. From the help in 4.7:
OPEN DATASET
Addition 1a
... FOR INPUT
Effect
OPEN ... FOR INPUT opens the file in read mode.
If the file does not exist, OPEN ... FOR INPUT fails with Return Code SY-SUBRC = 8.
Note
If OPEN DATASET is not executed in a Unicode program and if the user has write authorization for the file, the file is opened in read and write mode. Otherwise, it is only opened in read mode.
Rob

AP350 won't boot after IOS upgrade

I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
TFTP Required to Upgrade 1200 Series Access Points to this Release
Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After Quantum upgrade client box channels won't change & press C to change modes message?

Similar Messages

Maybe you are looking for