After reinstall, Aperture 1.5.1 doesn't show vault images from backup drive

Hi folks,
Okay, I am stuck. For some reason Aperture would not start when I double click the icon, so I reinstalled it from the disk and upgraded it to 1.5.1. I have all the images I was using before the crash backed up in a vault on my back up drive but when I open Aperture the folders and project do not appear in Aperture. I right click on the vault and say open with Aperture.app but nothing happens and I can't seem to access the files with Aperture.
If anyone can help, it would be really great and appreciated.
Thank you
Scott

Hi Scott,
Have you checked the Aperture - > Preferences and library location?
Default should be ~/Pictures/Aperture Library.aplibrary
Is there a ~/Pictures/Aperture Library.aplibrary in Finder?
If so, how large it is? does it seem to contain the images(sizewise)?
Restoring vault:
Have you tried opening Aperture, select File - Vault - Restore Library
hth

Similar Messages

Aperture 3 Import Dialog Doesn't Show Any Images

Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
Screenshot:
http://dl.dropbox.com/u/1250153/a3.png
Any ideas or fixes?

Hello qua
You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
Regards,
Gary

After updating to 6.0 iPhone doesn't show in iTunes for the wireless sync

I have the iPhone 4s, after updating to 6.0 it doesn't show in iTunes for the wireless sync. My iPad which is first gen. still shows up. If I plugin with usb it shows up but as soon as I unplug it disappears.
When I click on the sync wireless on the iPhone , it trys to sync but nothing.

it's okay, it is not silly. but yes it was on but i went ahead and turned it, (the phone) off rebooted and turned it back on and rebooted phone again to see if it helps it any.... but to no it did not change, it still doesn't show up. as well as when i look in on wifi and see choose network mine is not populated until after a couple seconds. so it has something to do with not being able to hold on to a wifi signal when going to sleep or putting phone to sleep via power button. i do not see the wifi signal meter until a couple seconds after i wake it up from sleep. and now neither my ipad or iphone show up in itunes. so there is issues i guess with something. i have tried everything an dam too frustrated to do anything more.

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

After ios 5 update are the email folder empty. an restore from backup won't help.. any ideas?

after ios 5 update are the email folder empty. an restore from backup won't help.. any ideas?

I Was wodnering of you ever had ths issue resolved. My wife's iPad 2 is havieng a similiar issue. The iPad receives only some emails -- they appear to be from people in her contacts-- but not emials from "strange" soucrces. No junk mail rules are set. And oddly enough it is a new iCloud email address.
What happened to your issue?
Here is the link to my disucussion:
https://discussions.apple.com/message/18105173#18105173

IDVD still doesn't show up on my hard drive

I just upgraded to Tiger and I noticed that iDVD wasn't on my hard drive. I installed the iLife software and iDVD still doesn't show up on my hard drive; however, the rest of the software did.
Please help!

Hi Sharee,
Do a custom install of the iDVD application from the iLife DVD, see instructions: iLife '05: How to custom install applications.

After reinstalling OS X Mavericks, iTunes doesn't recognize my photosphotos...

Hi, everybody,
After formating my iMac and reinstalling OS X Mavericks, iTunes doesn't recognize my photos. They are there in iPhoto, but when I try to synch them with my iPhone, for example, iTunes shows the Events, but tell that they're empty (but they are not empty!).
Well, this happens only in my user account - in my wife's account, everything is perfect!
I think it's not a problem with file permissions, because I have checked them and they are ok (well, I think they are ok...).
I tried also to rebuild iTunes Library, iPhoto Library and even reinstall iPhoto and iTunes, but nothing worked...
Please, could anyone help me?

Hello marchelr
Try the steps in the article below to troubleshooting your issue with syncing photos to your iPhone.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Resolution
If you encounter any of the above issues or another issue while syncing photos, try the following:
Ensure that you are syncing the device with the computer with which you normally sync photos.
Within iTunes, select the device, then select the Photos pane and turn off Photo syncing.
Sync your device. Important: This will remove all synced photos from your device.
Disconnect your device and update to the latest version of iTunes.
Remove your iPod photo cache.
Connect your device to iTunes.
Select the device, then select the Photos pane and turn on Photo syncing.
Sync your device.
Regards,
-Norm G.

After updating my iphone 4s it doesn't show up in itunes in windows8.

I updated my phone over wifi (not through my itunes). Now when i connect to my computer th computer shows my phone connected, my phone shows that it is charging, but it doesn't show in iTunes. When I go under file to Devices it says no devices are connected, When I run diagnostics it say no devices are connected, I have upgraded my Norton restarted iTunes, my computer, andmy phone. No luck. Any other suggestions?

In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only. When transferring iTunes content from another computer, all iTunes content on the iPhone that was transferred from a different computer will be erased from the iPhone first. The same applies to photos transferred from a computer.
To avoid this, you need to transfer your iTunes library from your old computer to your new computer following the instructions included with this link.
http://support.apple.com/kb/HT1751

Aperture 2 doesn't show my images unless I filter "Show all"

Hi,
I am using Aperture 2.1.4 in Snow Leopard with a fairly big photo library (4,000+ images).
If I look in any project or folder and filter by 'Unrated or Better' or with any * rating it does not show any of my images. The only way I can display my images is to filter by "Showing all" when it shows every images in the project/folder. Smart folders, MobileMe folders, etc all exhibit the same behaviour.
Many of my images are rated images and many are unrated and as far as I can tell, I have no other filters in place. I am at a complete loss as to what is causing this, re-installing Aperture had no effect, it appeared to start with Snow Leopard but I am not sure as I haven't used Aperture for a while.
Starting with 'command-option' held down and repair seems to hang but maybe I am just not patient enough to let it complete.

Tried rebuild again and it worked, strange. Please ignore this thread.

Lightroom 3.3 doesn't show all images of a folder

I have used Lightroom since version 1.0 and at the moment I am using v3.3.
Now I have following problem and I can't find a solution for it:
In the Navigator I have synchronized my complete folder where I store all of my photos. This folder contains more than 50000 photos already in many subfolders. But now I found some subfolders not showing all their content. I can see in the Navigator e.g. 216 pictures beside the folder name but in the preview I can see only 3 pictures! And I found some more folders which doesn't show their full content.
I tried to sychronize the single folder again but Lightroom says there were no new pictures and also no missing pictures to remove from the folder. If I open the folder by the Windows Explorer then I can see that all the files for the 216 pictures are there! So there must be a problem with the lightroom database!
But now I don't know what to do to get the pictures displayed in the library again.
I would appreciate any idea regarding this problem.
Best regards,
Jochen

Victoria_Bampton schrieb:
Jogi73 wrote:
Your FTP behaves strange! It doesn't keep the created directory and everything disappears shortly after uploading. Anything wrong with that?
LOL! Sorry, the login details I gave you were to the public upload, which then get hidden so no one else can download your files. I can see you're busy uploading ok, so I'll take a proper look in a bit. No I don't need the previews, just the cataog and a few problem files is great.
Ok, when the uploads are finished then you will have my current database, a screenshot of Lightroom which show no pictures in the library (and the preview) of a folder (all filters off, tried to synchronize already,) but it shows clearly that there are 31 pictures in the folder normally.
I also uploaded some of the pictures of this folder.
In past I could see the pictures in Lightroom - I can remember that.
Thanks and best regards,
Jochen

IPhoto app doesn't show any photos from my photos app

I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?

Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Lightroom 5 doesn't show GPS info from canon 6D

Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8! Strange...

I think I was having the same issue - after all I found out that when importing photos via Lightroom, I was overwriting the GPS information by "updating" the metadata by using the preset I used to use for my scanned film photographs.
Check the following:
When importing, on the right hand side you see "Apply During Import"
If you have the "Metadata" section "None" then this is not the solution for you. But if you have something else, make sure that you go into "Edit Presets" then UNCHECK "GPS" section of it.
Hope this helps.

Firefox doesn't show jpg files from a web page while other browsers do

I have created a page and uploaded www.nutechequipments.com/equipment.html page doesn't show the jpg files in only firefox everywhere including Dubai. But all the other browsers show the uploaded jpg pictures in perfect manner. In Firefox only the table is loaded with placeholders. It is not a problem with my computer. It is the problem all over the world.
the sample html code is given below:
<pre><nowiki><td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td></nowiki></pre>

You have backslashes (\: escaped as %5C as seen in Tools > Page Info > Media) in the scr attribute of the images and that doesn't work in Firefox.
You need to change the backslashes to forward slashes
<pre><nowiki>equip%5Cequip.jpg
equip%5Cequip1.jpg
equip%5Cequip%20(2).jpg
equip%5Cequip%20(3).jpg
equip%5Cequip%20(4).jpg
equip%5Cequip%20(5).jpg
equip%5Cequip%20(6).jpg
equip%5Cequip%20(7).jpg
equip%5Cequip%20(8).jpg
equip%5Cequip%20(9).jpg
equip%5Cequip%20(10).jpg
equip%5Cequip%20(11).jpg
equip%5Cequip%20(12).jpg
equip%5Cequip%20(13).jpg
equip%5Cequip%20(14).jpg
equip%5Cequip%20(15).jpg
equip%5Cequip%20(16).jpg
equip%5Cequip%20(17).jpg
equip%5Cequip%20(18).jpg
equip%5Cequip%20(19).jpg
equip%5Cequip%20(20).jpg
equip%5Cequip%20(21).jpg
equip%5Cequip%20(22).jpg
equip%5Cequip%20(23).jpg
equip%5Cequip%20(24).jpg
equip%5Cequip%20(25).jpg
equip%5Cequip%20(26).jpg
equip%5Cequip%20(27).jpg
equip%5Cequip%20(28).jpg
equip%5Cequip%20(29).jpg
equip%5Cequip%20(30).jpg
equip%5Cequip%20(31).jpg</nowiki></pre>

Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

Hi,
We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
So the questions are these:
1) does anybody know why the added memory doesn't show up in the task manager / rammap?
2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
Thank you,
- Kiril

Thanks for the reply Ravikumar,
Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
Best,
- Kiril
Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
If the above info does not help you, please contact dell as suggested by
Shaon Shan.
Regards, Ravikumar P

Exporting file as .doc doesn't show attached image

I need to create a combined cover letter/resume as a Word doc. So I created a file in Pages with my cover letter and attached a pdf resume image. I created the resume in Illustrator and then saved the Illustrator file as a pdf. This image shows up fine in Pages file. I then Exported the Pages file as a Word doc, but when I go to view the Word doc or when I email the file to others, the attached pdf image doesn't show. I thought maybe I needed to embed the pdf image for it to show up in the Word doc, but can't find any info about it on the web. I really want to use the file I created in Illustrator because it contains some graphics that pertain to some of my skills listed in the resume. Any information would help.

lilv
Welcome to the forum.
What do you mean by "attached"?
In Pages you just drag the .pdf into the page and it appears as a graphic and that exports correctly to Word in a quick test I have just done.
Peter

After reinstall, Aperture 1.5.1 doesn't show vault images from backup drive

Similar Messages

Maybe you are looking for