After reinstalling Acrobat 8 professional on new Windows 7, I occasionally get a notice that I need to Register the product but the Registration always fails; how do I resolve?

Please refer to : http://helpx.adobe.com/acrobat/kb/prompted-register-repeatedly-acrobat-8.html
Regards,
Anoop

Similar Messages

I try to open Acrobat I get a message that I need to register the product. I click on register and after about a minute, I'm told that I don't have an internet connection. My internet connection is working fine. In fact I registered Acrobat Pro XI using m

I try to open Acrobat I get a message that I need to register the product. I click on register and after about a minute, I'm told that I don't have an internet connection. My internet connection is working fine. In fact I registered Acrobat Pro XI using my account, but the program itself will not recognize it or allow me to use the software. What do I do?

If you already registered, then there is no point to trying to do so again. Simply dismiss the dialog.
Mylenium

My laptop died. I had music in the Cloud. When trying to sync my phone to the new labptop that is holding my music library I get a notice that says need to access music from ICloud. HOW???

My laptop died. My phone had my entire library on it. I set up a new laptop for my phone but when I try to sync the phone I get a note that says I must access my music from ICloud. I can't figure out how to do it? Also, all my purchased music is showing up in my library on my computer but NOT all the music I had in my old library. Any ideas?

Your music will only be where you put it.
Did you copy all of your music from your backup copy of your old computer to your new one?

I AM BRAND NEW TO THIS AND HAVE PROTECTED A DOCUMENT THAT I NEED TO EDIT. DOES ANYBODY HAVE AN IDEA ON HOW TO DO THAT, IT IS AN ENCRYPTED PASSWORD, SO I AM NOT SURE

I HAVE ACCIDENTALLY PROTECTED A DOCUMENT THAT I NEED TO EDIT. IT IS AN ENCRYPTED DOCUMENT THAT I PROTECTED TOO EARLY.
I AM VERY NEW TO THIS, ANY SUGGESTIONS???

It's OK, don't worry about it.
I assumed before that you don't know the password that you used. If that's not the case, then you can simply go back to File - Properties - Security and remove the security policy by setting it to "No Security" and entering the password when prompted. Then save the file and re-open it.

HT201320 after adding my new email account I am getting a pop that says a copy has been placed in the outbox . The recipient was rejected by the server because it does not allow relaying

Does anybody out there ever had a simlar issue ?

If you search the forum, you will see a number of these. It has to do with your SMTP server, which handles the sending of mail. Your SMTP server is not authenticating your account and so it will not send. Go into Settings>Mail, Contacts, Calendars, and select the account in question. Look under Outgoing Mail Server and click on the SMTP server. From there, you should see the Primary Server. Tap on that, and check the settings. Make sure your username and password are entered and correct, also, if SSL is off, try turning it on. If you cannot get it working, then delete the account, check with your email provider for all of the correct settings, and add the account back, being careful to spell username and password settings correctly.

Downloading Acrobat Professional X for Windows

Hi all,
My company bought me the Acrobat Professional X for Windows around 2 years ago. Now I have relocated to another country (and uninstalled the Acrobat Professional on old computer) and brought the licence key. When I wish to download the product so I can install on the new company, I noted that Acrobat already changed version to XI. What should I do in order to install the Acrobat Pro X on the new company? Thanks.
Regards,
Pal

Follow these guidelines:
Direct Download Links for Adobe Software
Mylenium

Can't create PDF files with adobe acrobat professional 8 on windows 7

I running acrobat Professional 8 on Windows 7 64bit. I can only create PDF files while logged on as administrator. I tried adding the user to the Administrators group, but still have the same problem. The system hangs right after adobe promts me for the file name, I provide the file name click save and it hangs when displaying the "printing message'
Any ideas?
Thanks
Fernando

Acrobat Pro 8 is not compatible with Win 7---especially for creating pdfs.

Which print in acrobat professional 9 in windows 8.1 x64?

Which print in acrobat professional 9 in windows 8.1 x64?

To print from Acrobat 9 Pro the click-path is "file - print".
As to using an Acrobat 9.x product in Windows 8.1 that's a no go.
The Acrobat 9.x product family is not compatible in Windows 8 or 8.1.
Note: The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
If in Windows 8.1 one must install (and update) Acrobat XI.
Be well...

How do I re-install Acrobat Professional on new laptop I have registered serial #

Hello,
I purchased Adobe Acrobat in 2011 and am registered on ADOBEs website with serial number. I have since had to upgrade laptop but now I can not find a link to reinstall Acrobate Professional 10. I have looked in the "my orders" page but there is nothing there.
Thanks,
Mike

Hi mikermonson,
Please find the direct link to download Acrobat 10 Pro: http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the same result. Any advice?

Try downloading the offline installer from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
Make sure you follow the Very Important Instructions on that page.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Just installed itunes on new windows 7 system Cant get it to import cd's when it is open. I have to close it first and then insert cd to import

just installed itunes on new windows 7 system Cant get it to import cd's when it is open. I have to close it first and then insert cd to import. any one know how to fix this?

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

When I try to open a new window in Firefox, I get an error message

When I try to open a new window in Firefox, I get the following error message:
"Not Found
The requested URL /en-US/firefox was not found on this server."
...but other websites, such as Google or CNN.com, work just fine.
I'm running Firefox 3.6.28 on my MacBook Pro, with OS 10.4.11. I can't update to the latest version of Firefox unless I update my OS, which would be costly and also involve increasing my RAM.
But the Firefox homepage worked fine until this morning. Is this likely to be a temporary glitch? If not, how can I fix it?
Thanks,
Emmy

At least at the moment, the default Firefox homepage is back! So maybe this was a momentary glitch. But see below.
BTW, here's the URL for the page:
http://start.mozilla.org/en-US/?client=firefox-a&rls=org.mozilla:en-US:official
'''But, '''the "Mozilla Firefox Start Page" currently lacks a menu bar at the top with various Google options such as "Gmail," "more," etc. I found these very useful.
I'm wondering -- did Google tell Mozilla to stop including those links on its start page? Maybe Google wants us all to switch to having Google as our default homepage. Or is the lack of a menu bar just another temporary glitch?
Emmy

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

After reinstalling Acrobat 8 professional on new Windows 7, I occasionally get a notice that I need to Register the product but the Registration always fails; how do I resolve?

Similar Messages

Maybe you are looking for