After reinstalling Photoshop 12 I get an Error 213:11 when I launch the program and the associated msg tells me to contact Adobe Support but they say I eed to go through the forum

How can I get past an error 213:11. Adobe support says I need to use the forum to get this issue resolved.

Nobody can tell you anything without proper system info or other technical details. This is a licensing error that could have al lsorts of potential causes.
Mylenium

Similar Messages

TS3212 I'm runing IE9 & I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package

I'm running IE 9 & windows 7. I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.

There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

I have purchased adobe photoshop element 10 editor today but been having problem downloading.. it says error and problem on verification. Also tried contacting customer support but couldn't get through? can I still get my money back?

i have purchased adobe photoshop element 10 editor today but been having problem downloading.. it says error and problem on verification. Also tried contacting customer support but couldn’t get through? can I still get my money back?

Hi ...
If you have anti virus software installed, you need to disable that in order to download apps.
Apple's policy clearly states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
edited by: cs

Hey, I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code

I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code is error: 213:19. Does anyone seeing this please have any advice on what to do?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

TS1424 I'm getting a message that indicates "Itunes has stopped working. A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available. But I never get a response. Can somebody help?

When opening Itunes, after placing my ID and password, I'm getting a message that indicates "Itunes has stopped working. A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available. But I never get a response. Can somebody help?

Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access.

I keep getting an error -54 when attempting to back up and restore. How do I correct the issue?

I keep getting an error -54 when attempting to back up my 4S and restore to my new 5S. How do I correct the issue?

Can you try again with Firefox 4.0b8 (desktop) and 4.0b3 (Android)? We have changed the way that Sync setup works, and it no longer requires entering the password and sync key by hand.
For details, see: http://blog.mozilla.com/services/2010/12/22/easy-setup-for-firefox-sync/

I get an error message when I scan a file and try to e-mail or save it as a pdf?

When I scan and hit save as pdf, I get and error that says check properties for the file to make sure it is not a read only?

I recently installed Mavrick 10.90 on my Mac book pro. I have a HP 4500 printer scanner. and I have Adobe 11.0. My wife suggested that I uninstall the printer software and re-install it. After I did that, the problem was solved.

I keep getting an error message when I log onto Firefox and I can't figure out how to fix it, can you help?

Every time I log onto Firefox I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
I am running Windows 7 - 64 and am using Avast Internet Security 2013.

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

HT4059 Am getting an error message when I try to open and read my book, how do I correc this?

I am getting an error message in iBooks when I try to open and read my book, how do I correct this?

Welcome to the Apple community.
Have you tried deleting the book and re-downloading it from the purchased section of the bookstore. If this doesn't help, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

I get this error message when i launch After Effects CC 2014 Trial

After Effects error: crash in progress. last logged message was: <6652> <GPUManager> <2> sniffer result code: 3

To everyone posting on this thread:
Without much more detail, there is very little that anyone can do to help you.
Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
At the very least, at least give the exact version number for your operating system, the exact version number of After Effects, and details of your graphics card and its drivers.

HT5278 i get an error message when i try to update and i don't know what to do

I am trying to update my iphone with the ios 5.1.1 but every time i download(2hrs), it gives me an error messg and will not update!

What error message are you recieving?

Why do I get an error message when trying to Extrude and Bevel my image?

I am making a logo for a friend and he wants something similar to the Stark House symbol. (The Direwolf) but as a dragon instead. I used the pen tool to make the shape, and now I want to fill it in and make it more 3D. I can't fill it in properly and my image gets an error message when I try to Extrude and Bevel. Why is this?

error message,
Is the path/shape closed?
Selecting it and Ctrl/Cmd+J should close it if not, then you may try again.
You may also have a look in the Document Infor palette with Objects ticked in the flyout and the path selected.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

After reinstalling Photoshop 12 I get an Error 213:11 when I launch the program and the associated msg tells me to contact Adobe Support but they say I eed to go through the forum

Similar Messages

Maybe you are looking for