After setting the time properties to 2 sec

Hi all,
after setting the time properties to 2 sec teh movie runs on its own after publishing
and doesn't stop at the designated stops
can i hold the movie to a frame for 2 sec in another way?
tia
Herman

If you just want to kill time, insert this Lingo :
t = the ticks + 1000 * N  -- where N = number of seconds to pause
repeat while the ticks  < t
end repeat
The only drawback is that Director won't accept any interaction while the loop executes

Similar Messages

  • [svn] 1657: Rebuilt our modified Batik and Velocity JARs after setting the file properties correctly on modules /thirdparty.

    Revision: 1657
    Author: [email protected]
    Date: 2008-05-09 17:37:18 -0700 (Fri, 09 May 2008)
    Log Message:
    Rebuilt our modified Batik and Velocity JARs after setting the file properties correctly on modules/thirdparty.
    Modified Paths:
    flex/sdk/trunk/lib/batik-all-flex.jar
    flex/sdk/trunk/lib/velocity-dep-1.4-flex.jar

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • Get an error after updating the core properties

    Hello,
    I have just started using Open XML and I am trying to do something really simple to get and set the core properties of a document. I am using the following code
    public static void getProps(String fileName)
    WordprocessingDocument document = null;
    try
    document = WordprocessingDocument.Open(fileName, false);
    var docProps = document.PackageProperties;
    Console.WriteLine("Category " + docProps.Category);
    Console.WriteLine("ContentStatus " + docProps.ContentStatus);
    Console.WriteLine("ContentType " + docProps.ContentType);
    Console.WriteLine("Created " + docProps.Created);
    Console.WriteLine("Creator " + docProps.Creator);
    Console.WriteLine("Description " + docProps.Description);
    Console.WriteLine("Identifier " + docProps.Identifier);
    Console.WriteLine("Keywords " + docProps.Keywords);
    Console.WriteLine("Language " + docProps.Language);
    Console.WriteLine("LastModifiedBy " + docProps.LastModifiedBy);
    Console.WriteLine("LastPrinted " + docProps.LastPrinted);
    Console.WriteLine("Modified " + docProps.Modified);
    Console.WriteLine("Revision " + docProps.Revision);
    Console.WriteLine("Subject " + docProps.Subject);
    Console.WriteLine("Title " + docProps.Title);
    Console.WriteLine("Version " + docProps.Version);
    catch (Exception ex)
    Console.WriteLine(ex.Message);
    finally
    document.Close();
    and
    public static void setProps(String fileName)
    WordprocessingDocument document = null;
    try
    document = WordprocessingDocument.Open(fileName, true);
    var docProps = document.PackageProperties;
    docProps.Category = "test21";
    docProps.ContentStatus = "test21";
    docProps.ContentType = "test21";
    docProps.Created = DateTime.Now;
    docProps.Creator = "test21";
    docProps.Description = "test21";
    docProps.Identifier = "test21";
    docProps.Keywords = "test21";
    docProps.Language = "test21";
    docProps.LastModifiedBy = "test21";
    docProps.LastPrinted = DateTime.Now;
    docProps.Modified = DateTime.Now;
    docProps.Revision = "test21";
    docProps.Subject = "test21";
    docProps.Title = "test21";
    docProps.Version = "test21";
    catch (Exception ex)
    Console.WriteLine(ex.Message);
    finally
    document.Close();
    after I call the setProps if I try to open the word document with word I will get an error that says
    file xxx.docx cannot be opened because there is a problem with the contents
    and then tells me that it has found some unreadable context and if I would like restore the document.
    could someone tell me what I am doing wrong? and why this is happening.
    cheers,
    Ehsan 

    Hi Ehsan,
    Thanks for posting in MSDN forum.
    According to your description, the document couldn't be open after set the package properties for it.
    After the investigation, I found that we couldn't set a string value for the
    Revision package property. Here is the statement:
    The Revision property indicates the number of changed saves or revisions.
    The application is responsible for updating the Revision property value after each revision
    After I change it to a number the code works well for me. For example:
    docProps.Revision = "2";
    Also here is the link for this property for your reference:
    PackageProperties.Revision
    Property
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do i set the time frame of a waveform chart programmatically to be a 30 sec window or a 24 hour window

    i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
    Attachments:
    BX0265 ShelfLife DAQmx.vi ‏120 KB

    Okay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903. 
    You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum.  If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum.  Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
    Doug M
    Applications Engineer
    National Instruments
    For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

  • Setting the time in CIMC

    Newbie question.. but how do I set the time in CIMC?                  

    What type of server do you have?
    Is it a c-series server?
    To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.

  • Setting the time in iPod Classic

    Hello,
    I set the time in 24 h mode as this is normal in Germany. When changing the time, the screen still shows the American way in 12 h mode. How can I change this, too?
    Best regards
    rudi_ratlos

    Hi Jochen,
    Clock control will display only the System time but you can change it by defining the 'Time Zone' dropdown in 'Display' tab of Clock properties.
    Regards
    Basheer

  • How do I set the Time of Day that a sync will occur?

    Like a lot of Aussies I have an ISP plan that has Peak/Off-Peak hours. What I want to do is have my iTunes do all it's sync/podcast updates at a certain time (say 4AM) when I'm not doing anything else, it's taken from my Off-Peak monthly usage total and leaving me both free bandwidth and Peak time capacity for the month.
    I notice I can set my Podcast updates to check daily, but how does one set the time of the day?

    I believe that when it has attempted to download (or actually downloaded) it automatically schedules the next attempt after the time period. To make it execute your downloads at 4AM, get up at 4AM once and force it to check for downloads, it should schedule the next attempt at 4AM the next day, then the following, etc.
    I would schedule the first download early in the offpeak hours so that if there is any drift in the time, it wouldn.t run into the peak hours.

  • Setting the time automatically

    Hi.
    My iPhone4 is 7 hours ahead of the actual time when I use the automatic setting.
    I run software version 4.3.5 and I am currently in Cambodia.
    In other places the automatic setting normally works ok.
    Interestingly enough my iPad (also version 4.3.5) has no problem setting the correct time.
    No a major problem setting the time manually, just a bit of a pain when I forget and the alarm goes off early...
    /K

    Hello Basilsami,
    It sounds like your phone is not keeping the correct time and date, either when set to automatic, or manual. I recommend these troubleshooting steps from the article named:
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/ts3920
    Follow these steps. Test after each step to see if the issue is resolved.
    Ensure that the version of iOS on your device is up to date.
    If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
    Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
    If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
    Note: The option to set automatically might not be available on all carriers in all countries.
    Additional Information
    Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically).
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • TimerThread problem after setting system time

    Hi,
    We are creating an application where we schedule some jobs in timer thread. Say I have scheduled a job after one hour and in between I have changed the system time. Then timer thread excecutions are not happening properly. While resetting the system time we are restting the JVM time also by Calender.setTime(Date). Please tell me what went wrong in this case.
    Thanks in advance,
    Champak

    Did you check this bug report:
    [java.util.Timer.scheduleAtFixedRate() fails if the system time is changed |http://bugs.sun.com/view_bug.do?bug_id=4290274]
    javachampak wrote:
    ... While resetting the system time we are restting the JVM time also by Calender.setTime(Date). ...
    This does not reset the jvm time, it sets the time of this calendar instance as described in the javadoc.

  • Set the time?

    How do you set the time? i forgot, lol. after my silly long update and no phone for many hours it seems to have been set 8 hours behind now.
    thx
    K....................

    iPhone Settings > General > Date & Time
    If your Time Zone is wrong like mine was for some reason and you are from the UK, search for London. Change the Time Zone before altering the time and see if that fixes your problem.
    Message was edited by: DocG

  • How do you set the time period on IMAP email accounts (razr maxx)

    Hi Guys -
    Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
    Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
    On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
    Your help is appreciated!
    Best Wishes for the Holiday Season.
    -Rich

    Hey Rich.  Once in 'settings,' there should be a "days to sync' under the 'data usage' section.   You don't have that?

  • Can't set the time on the 6500 Slide

    I just bought a 6500 slide and can't do one of the most basic things - set the time!
    I have gone to auto-update but it is shows the wrong time.
    At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
    I have managed to save the correct date but can't for the life of me now save the correct time.
    Can anyone help?
    So simple but yet I can't figure it out.
    Thanks.

    Hi racheljc,
    Try this:
    Menu
    Settings
    Time and date
    Time
    From there, you should be able to change the time.
    I hope this helps.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • How do I set the time in icloud mail?

    I have tried to set the time zone in my account. It show CST, but is 2hours behind time and I cannot get it to change.

    Hi...
    On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
    For an iOS device, tap Settings > General > Date & Time > Time Zone

  • Setting the time on 1300 bridges

    stupid question, how do you set the clock on the 1300 bridges, specifically the 1310?

    kieran
    two issues
    one the Cisco AP's do not have a clock like your PC if you set the time manually when the AP loses power or reboots the time is reset to the default and you need to set it again.
    te]wo the better solution is to designate a time server for the AP to syncronize to.
    either method can be configured by clcking services on hte WEB interface and then select NTP or SNTP depending on you IOS version. then entering the time server IP address in the proper box or typing in hte proper date and time in the fields below, if you select the time server method the date and time will be filled in automaticaly once the time is syncronized.
    HTH
    Bill

  • How to set the show properties as  a default in KM

    Hello All,
    I am trying to upload the documents in KM repository using File-> Upload. If I click this Upload button, it will open a new window, it will show (show properties) this properties. But I want this one as default. Can any one help to set the (show properties) as a default? 
    Thanks in  Advance.

    Hi Gowsika,
    I'm sorry, but you seem not to get my explanation.
    First, there is no such "switch" for "Show Properties" or "Hide Properties", and there is also not Resource Type "Show Properties". It is hardcoded in the UICommand "upload" (so in the Screenflow implemented by com.sapportals.wcm.rendering.uicommand.cm.UIUploadCommand), that if the ResourceType "normalrt" (http://sap.com/xmlns/cm/framework/normal-resource-type) displayed "Normal Document" is selected, you will see the "Show Properties" link. Only by changing the implementation of this UICommand you could change this behavior, but it's not recommended because you have to make sure on upgrades that you don't overwrite it again.
    So again my suggestion:
    1. Go to KM->CM->Configuration->CM->Global Services->Resource Types
    2. Duplicate the Resouce Type "normalrt" changing:
      Name: my_normalrt
      Resource Type ID: http://sap.com/xmlns/cm/framework/my-normal-resource-type
    3. Go to KM->CM->Configuration->CM->Global Services->Property Structures->Property Structures
    4. Duplicate "DefaultPropertiesStructure" changing:
      Name: My_DefaultPropertiesStructure
      Resource Types: http://sap.com/xmlns/cm/framework/my-normal-resource-type
      Structure Items: "Input_here_your_properties_and_property_groups"
    BTW: If you want to have the same properties as in DefaultPropertiesStructure you might be obligated to remove some of them from the original Property Structure.
    5. Go to KM->CM->Configuration->CM->User Interface->Commands->UI Commands
    6. Duplicate "new_file" changing:
      Alias: my_upload
      Parameters: ResourceType=http://sap.com/xmlns/cm/framework/my-normal-resource-type,standalone=true
    7. Go to KM->CM->Configuration->CM->User Interface->Commands->UI Command Groups
    8. Edit AdminNewResourceGroup by renaming upload to my_upload in the "Commmand List" parameter.
    BTW: It's advisable to duplicate the whole Command Group and use it in your Layout Set and not to change the standard configuration, but I will not describe the whole process here
    9. Now go to KM Content and use the menu Folder->New...->Upload
    Hope this helps,
    Robert

Maybe you are looking for