After Solaris 11.1 upgrade "GPU hung" OS starts, but no graphics, GPU hung

I have an Intel DH77EB motherboard. Solaris 11 installed fine (after disabling Intel VT-d). Upgrade to 11.1 processes went fine. OS boots up. Not services in maintenance mode. But, I can't access the console because the GPU has hung. Get the following in /var/adm/messages:
Nov 8 15:18:51 media genunix: [ID 851289 kern.warning] WARNING: [drm:i915_do_wait_request:1479] wait_for: i915_do_wait_request taking EBUSY
Nov 8 15:18:51 media genunix: [ID 552796 kern.warning] WARNING: [drm:i915_do_wait_request:1490] i915_do_wait_request returns -16 (awaiting 1292 at 1291, next 1293)
Nov 8 15:18:54 media genunix: [ID 851289 kern.warning] WARNING: [drm:i915_do_wait_request:1479] wait_for: i915_do_wait_request taking EBUSY
Nov 8 15:18:54 media genunix: [ID 552796 kern.warning] WARNING: [drm:i915_do_wait_request:1490] i915_do_wait_request returns -16 (awaiting 1292 at 1291, next 1293)
Nov 8 15:18:57 media genunix: [ID 851289 kern.warning] WARNING: [drm:i915_do_wait_request:1479] wait_for: i915_do_wait_request taking EBUSY
Nov 8 15:18:57 media genunix: [ID 552796 kern.warning] WARNING: [drm:i915_do_wait_request:1490] i915_do_wait_request returns -16 (awaiting 1292 at 1291, next 1293)
Nov 8 15:19:03 media genunix: [ID 409100 kern.warning] WARNING: [drm:i915_hangcheck_elapsed:1447] Hangcheck timer elapsed... GPU hung
scanpci output:
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x8086 device 0x0152
Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
In the HCL, it appears that the graphics device is supported.
HCL webpage snippet:
8086,162
i915
Information
Video
Intel Corporation
Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
8086,152
i915
Information
Video
Intel Corporation
Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
end snippet

I had trouble with Gnome desktop after upgrading from 11.0 to 11.1
Solution was to remove pkg SUNWvboxguest.
After suggessful remove I could re-run pkg upgrade.
Check/paste /var/log/Xorg.0.log that might give some hints...
I got eg. this error; but NOW its working...:)
Nov 15 20:18:59 dagobert11 gdm-binary[1109]: [ID 702911 daemon.warning] WARNING: GdmDisplay: Display /org/gnome/DisplayManager/Display1 failed 5 times in 18.000000 seconds, no longer managing display

Similar Messages

Vlan stopped working after Solaris 11.1 upgrade

Sorry for the long post.
I upgraded a test server to Solaris 11.1 from 11/11 a few days ago. After I did the upgrade my one VLAN-based network connection stopped working. I've been messing with it for days and am a bit baffled.
Note that everything was up and working just before the upgrade. This is not a switch configuration problem or a cables issue.
All of the other networking survived the upgrade just fine...
The link that stopped working is a VLAN running on top of a two-link LAG. The untagged link running over the same LAG works just fine.
So here's the strange part. As I was trying to get underneath it all today I fired up wireshark to see if I could figure it out. As soon as I put wireshark up on the interface (in its default promiscuous mode) the link started working. All the packets in the trace looked normal. All was good. As soon as I stopped the trace the link was dead again. Start a trace - link in promiscuous mode - and all is good again. Stop and it stops...
If I bring bring up wireshark on the link without promiscuous mode the link does NOT start working. If I initiate a ping that should go out on the broken VLAN I see a series of ARP requests but no answers (running wireshark on the machine being ping'd I see all of the ARP request come in and the answers go out, but the Solaris machine never sees the answers).
So - did Oracle manage to break VLANs in 11.1? Any ideas how to get it working again?
A few bits on info from the machine. The only thing that looks odd/wrong I've highlighted below.
Phil@TEST:~$ dladm show-link
LINK CLASS MTU STATE OVER
e1000g1 phys 1500 up --
e1000g0 phys 1500 up --
ixgbe0 phys 9000 up --
ixgbe1 phys 9000 up --
aggr2 aggr 9000 up ixgbe0 ixgbe1
aggr2vlan5 vlan 9000 up aggr2
Phil@TEST:~$ dladm show-vlan
LINK VID OVER FLAGS
aggr2vlan5 5 aggr2 -----
Phil@SE11_SAN:~$ ipadm show-addr aggr2vlan5
ADDROBJ TYPE STATE ADDR
aggr2vlan5/v4 dhcp ok 192.168.5.101/24
Phil@TEST:~$ dladm show-linkprop aggr2vlan5
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
aggr2vlan5 autopush rw -- -- --
aggr2vlan5 zone rw -- -- --
aggr2vlan5 state r- unknown up up,down
aggr2vlan5 mtu rw 9000 1500 1500-9000
aggr2vlan5 maxbw rw -- -- --
aggr2vlan5 cpus rw -- -- --
aggr2vlan5 cpus-effective r- 0-7 -- --
aggr2vlan5 rxfanout rw -- 8 --
aggr2vlan5 rxfanout-effective r- 16 -- --
aggr2vlan5 pool rw -- -- --
aggr2vlan5 pool-effective r- -- -- --
aggr2vlan5 priority rw high high low,medium,high
aggr2vlan5 forward rw 1 1 1,0
aggr2vlan5 protection rw -- -- mac-nospoof,
restricted,
ip-nospoof,
dhcp-nospoof
aggr2vlan5 mac-address r- 0:1b:21:6b:23:98 0:1b:21:6b:23:98 --
aggr2vlan5 allowed-ips rw -- -- --
aggr2vlan5 allowed-dhcp-cids rw -- -- --
aggr2vlan5 rxrings r- -- -- --
aggr2vlan5 rxrings-effective r- -- -- --
aggr2vlan5 txrings r- -- -- --
aggr2vlan5 txrings-effective r- -- -- --
aggr2vlan5 txrings-available r- 0 -- --
aggr2vlan5 rxrings-available r- 0 -- --
aggr2vlan5 rxhwclnt-available r- 0 -- --
aggr2vlan5 txhwclnt-available r- 0 -- --
aggr2vlan5 vsi-mgrid rw -- -- --
aggr2vlan5 etsbw-lcl rw -- 0 --
aggr2vlan5 etsbw-lcl-effective r- -- -- --
aggr2vlan5 etsbw-rmt-effective r- -- -- --
aggr2vlan5 etsbw-lcl-advice r- -- -- --
aggr2vlan5 cos rw -- 0 --
Edit/Delete Message

Fixed. Don't know exactly how/why, but fixed.
When I came home this afternoon I deleted the all of the IPs associated with the VLAN and the LAG. I deleted the VLAN itself and deleted the LAG. Basically tore down all of the datalink and IP layers leaving only the raw interface cards. Rebuilt the LAG, rebuilt the VLAN and reinstalled the IPs. And like magic, the whole thing is happy.
Something in the configs of the LAG or the VLAN must have been corrupted during the upgrade. But now its all fat, dumb and happy again.
Very odd.

After 10.4.11 upgrade Macbook won't start can't boot from external HD

Hi guys,
I just suffer as all other that after try ti install the 10.4.11 update my macbook won't start, I have a external HD with a image of my macbook but went I press and hold the option key I only see the bootcamp parttion and my internal HD, I don't see the external HD.
How can I boot from my external HD if I have a bootcamp partition?
Thanks

I follow the robotobi post and solve this issue.
Thanks robotobi

Type Error: oE Started immediately after Auto Java update! Other threads just started but doesn't mention the relationship! Firefox reset does not correct

Problem correlates exactly with the Java update time per event viewer! Problem is starting to gain traction as more users experience same! Can’t determine how to fix? Maybe an error in the Java update?

I have also been having this problem, starting today, although my Firefox doesn't crash/close when the error box pops up - I can just close the box and carry on browsing.
However, as with the person in the thread listed above, I found that disabling McAfee SiteAdvisor seems to stop it happening (it happened fairly at random, but in about half an hour of browsing with it disabled, I haven't had the error pop up, compared to within a few minutes when SiteAdvisor is enabled). It looks like there was also a SiteAdvisor update today, so that also correlates with the onset of this problem. Are other people getting this problem using SiteAdvisor? I don't know much about the mechanics of SiteAdvisor - could there be a link with Java too?
Using Firefox 27.0, Windows 7 SP1, McAfee SiteAdvisor 3.6.5, Java 10.45.2.18.

Firefox after version 3.5.19(include Firefox 6) started but no window was showed.

I tried
- http://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start
- Remove profile
- uninstall firefox, delete revelent files and registries
- remove add-on, cache, history
- ...

It's a company laptop with anti-virus and firewall: they both didn't notify about any errors or virus. Also, IE doesn't seem affected.

Satellite P850-31L thinks Intel HD GPU driver is old after Win 8.1 upgrade

Hi there,
I have had my Satellite P850-31L since last year and recently updated to windows 8.1.
This laptop has a NVIDIA GeForce GT 640M graphics card and it use to say that on my dxdiag.
Since updating to windows 8.1 my laptop seems to think I have a Intel HD Graphics 4000 and apparently it's out of date.
When I go on their site to test for the update.
I got told my graphics card is 'up to date' yet every thing else - including my toshiba driver manager says it's out of date.
I've tried updating yet I keep getting a message saying my system setting aren't good enough.
Anyne got any suggestions on what i can do.
Can I get my laptop to stop thinking it has a intel graphics when it has the NVIDEA chip

> defterniko
After Windows 8.1 upgrade you should visit the Toshiba EU driver page and should update the drivers and utilities to the Windows 8.1 version.
Most people forget to do that they update the system from Windows 8 to Win 8.1 but dont update the drivers.
As mentioned by user IronMan; the installation instruction which is available on the Toshiba EU driver page shows you the driver and tool which needs to be updated and you should also follow the installation order mentioned in this instruction.

After Solaris live upgarde disks unavailable

Hi All,
we have two SUN Fire 6800 - cluster node. OS and Kernel Version: Solaris 9 9/05 s9s_u8wos_05 SPARC. After Solaris live upgrade the new root disks are continueously failing. During boot with new boot environment Solaris_9_905 wait and then boot disks become unavailable, cluster will crash and start with old boot environment. If the failed devices are removed then inserted, it makes the device available again.
Could anybody help us? Any idea?
regards
Josef

Hi Tim,
We have Sun Cluster 3.1. Is it possible error? I'll seek for description of LU.
However: it seems a simple hardware failure. it lost just the disks.
Messages:
root@mcl01:~#metastat -p
d60 -m d61 d62 d63 1
d61 1 1 c1t1d0s6
d62 1 1 c1t5d0s6
d63 1 1 c1t4d0s6
d50 -m d51 d52 d53 1
d51 1 1 c1t1d0s5
d52 1 1 c1t5d0s5
d53 1 1 c1t4d0s5
d30 -m d31 d32 d33 1
d31 1 1 c1t1d0s3
d32 1 1 c1t5d0s3
d33 1 1 c1t4d0s3
d0 -m d1 d2 d3 1
d1 1 1 c1t1d0s0
d2 1 1 c1t5d0s0
d3 1 1 c1t4d0s0
0. c1t0d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000870e3de0,0
1. c1t2d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871421d4,0
2. c1t3d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871432fc,0
3. c1t5d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871421a1,0
root@mcl02:~#metastat -p
d60 -m d61 d62 d63 1
d61 1 1 c0t1d0s6
d62 1 1 c4t1d0s6
d63 1 1 c4t2d0s6
d50 -m d51 d52 d53 1
d51 1 1 c0t1d0s5
d52 1 1 c4t1d0s5
d53 1 1 c4t2d0s5
d30 -m d31 d32 d33 1
d31 1 1 c0t1d0s3
d32 1 1 c4t1d0s3
d33 1 1 c4t2d0s3
d0 -m d1 d2 d3 1
d1 1 1 c0t1d0s0
d2 1 1 c4t1d0s0
d3 1 1 c4t2d0s0
0. c0t0d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@0,0
!!! 1. c0t1d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@1,0
2. c0t2d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@2,0
297. c4t0d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@0,0
!!! 298. c4t1d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@1,0
!!! 299. c4t2d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@2,0
And
"format" doesn't show some of these disks or says "disk type undefined" (- something like this)
thx
J

Removing keyboard layout to upgrade GPU

Hi,
I'm using a G575 and noted that there is no way to open the top of the keyboard cover other than some cracks I saw between keyboard and the insides. Just wondering how to go about opening up this portion. Another thing that I want to ask about is, whether or not there is the ability to a) upgrade GPU and b) replenish CPU thermo paste (want to replace it with higher performance).
Regards,
Jim
Solved!
Go to Solution.

Hi bassbelouder,
Welcome to the Lenovo Community Forums.
Please see Hardware and maintenance manual under page 47. Please exercise caution when accessing components in the laptop. Please follow steps listed under page 33 of the service manual before replacing parts. To replace the keyboard you need to remove the battery and the access panel first. Then after this you will need to remove 3 keyboard screws. After removing the 3 keyboard screws, you can use a plastic pick (prying tool) or your fingernails to lift the keyboard up a little from the edge, then slowly slide the keyboard towards the LCD panel.
With regards to CPU thermo paste you should be able to apply it with a different thermal paste of your choice. However, with the GPU the integrated version does not show any provision for any available slots for the upgrade.
Hope this helps.
Don

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar. Totally stumped. Ideas anyone?

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
Google calendar syncs on all devices. Totally stumped. Ideas anyone?
THANKS

1.      Log onto Outlook Web Access
2.      Top right hand part of the screen select "Options"
3.     Select "See All Options"
4.      Select "Phone" menu
Check if you have 10 Devices registered.
If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
Check the "Last Sync Time" to indicate if this device is still active or not.

After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
Any help would be appreciated. Thank you.

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

Dictation problems after ios 8.2 upgrade

I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
    1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated! Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
    2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
2. In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox. That means I HAVE to type n I stink at that. To reproduce I simply:
1. press the microphone.
2. Type in only numerics 1 thru 17....it will dictate to look like this: 123 456-789-1011 1213 1415 1617
3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
4. press the microphone
   5. "Beep/dong" noise because it wont let you dictate any more of anything said.
I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
I Have not trieddictation on my mac...yet.
CAn someone help on these issues please? Thanks!

Hey Markwoody,
Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/ht201559
How to reset
- You should reset your device as a last resort and only if you can't restart it.
- To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

After Solaris 11.1 upgrade "GPU hung" OS starts, but no graphics, GPU hung

Similar Messages

Maybe you are looking for