After Solaris live upgarde disks unavailable

Hi All,
we have two SUN Fire 6800 - cluster node. OS and Kernel Version: Solaris 9 9/05 s9s_u8wos_05 SPARC. After Solaris live upgrade the new root disks are continueously failing. During boot with new boot environment Solaris_9_905 wait and then boot disks become unavailable, cluster will crash and start with old boot environment. If the failed devices are removed then inserted, it makes the device available again.
Could anybody help us? Any idea?
regards
Josef

Hi Tim,
We have Sun Cluster 3.1. Is it possible error? I'll seek for description of LU.
However: it seems a simple hardware failure. it lost just the disks.
Messages:
root@mcl01:~#metastat -p
d60 -m d61 d62 d63 1
d61 1 1 c1t1d0s6
d62 1 1 c1t5d0s6
d63 1 1 c1t4d0s6
d50 -m d51 d52 d53 1
d51 1 1 c1t1d0s5
d52 1 1 c1t5d0s5
d53 1 1 c1t4d0s5
d30 -m d31 d32 d33 1
d31 1 1 c1t1d0s3
d32 1 1 c1t5d0s3
d33 1 1 c1t4d0s3
d0 -m d1 d2 d3 1
d1 1 1 c1t1d0s0
d2 1 1 c1t5d0s0
d3 1 1 c1t4d0s0
0. c1t0d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000870e3de0,0
1. c1t2d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871421d4,0
2. c1t3d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871432fc,0
3. c1t5d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000871421a1,0
root@mcl02:~#metastat -p
d60 -m d61 d62 d63 1
d61 1 1 c0t1d0s6
d62 1 1 c4t1d0s6
d63 1 1 c4t2d0s6
d50 -m d51 d52 d53 1
d51 1 1 c0t1d0s5
d52 1 1 c4t1d0s5
d53 1 1 c4t2d0s5
d30 -m d31 d32 d33 1
d31 1 1 c0t1d0s3
d32 1 1 c4t1d0s3
d33 1 1 c4t2d0s3
d0 -m d1 d2 d3 1
d1 1 1 c0t1d0s0
d2 1 1 c4t1d0s0
d3 1 1 c4t2d0s0
0. c0t0d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@0,0
!!! 1. c0t1d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@1,0
2. c0t2d0
/ssm@0,0/pci@18,700000/pci@1/scsi@2/sd@2,0
297. c4t0d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@0,0
!!! 298. c4t1d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@1,0
!!! 299. c4t2d0
/ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@2,0
And
"format" doesn't show some of these disks or says "disk type undefined" (- something like this)
thx
J

Similar Messages

Open production orders and outbound delivery after go-live

Hello All,
I tried to search answer for this question but could not find answer.
Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
Similarly with outbound delivery how to update WM status after go-live.
Thanks in advance

Thanks to both Jurgen and Sander
Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders.

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

In measurement doc.where to enter as on date counter readings after go live

Dear All,
After go live the sap system, user has to start creating the measurement document for counters which as follows.
Suppose we have go lived on 1st feb 2010, so on that day already physical counter is showing following readings.
Equipment - Counter - Current readings of meter (as on 1st feb 2010)
DG Set - Running Hours - 3000
Boiler - Running Hours - 2400
Compressor - Running Hours - 3800
Electricity meter - Units - 5800
I am little confused about in which field of measurement document i have to enter the above as on date readings (1st feb 2010).
Those fields are
Counter reading
Differnce
I am also worried, because this is start of creation of measurement document & which makes basis for counter base preventive maintainence of equipment.
Thanks & Regards,
Sandeep

Hi
First time reading you entre in counter reading filed, then the subsequent daily reading you can entre in counter reading field or difference.
It means, if you entre counter reading, system automatic calculate the difference (i.e current minus previous reading),
or if you entre the difference, then system bring the counter reading as difference plus previous reading.
Check these senerios in Quality and then you can take decision
S Ramanujam

Use of half months in the company code configuration after Go Live

Hi,
Our client has a requirement to activate the functionality of u201CUse of
half months in the company code configuration in Asset accounting after 3 month of Go live.
For the above purpose, we enabled the same in our Development server
(DE5) after Go Live and we are getting some Errors at the time of Asset
posting in F-90 and Asset Explore AW01N and even depreciation Run.
Already we ran 3 months depreciation without enabling this
functionality and now the client requires this in our Production server
before running the 4 period depreciation.
We are using the same Fiscal year variant (V3) at Depreciation area
level for all our company codes. All other company codes enabled this
functionality except one company code (NOPE) .
So the client requires this Half month depreciation calculation
Functionality in company code NOPE too.
Please advice to resolve this issue at the earliest and its quit urgent.We are using the same depreciation key, asset class in all company codes.
Thanks
Man
Error details,
SYST: You cannot change the depreciation periods
Message no. AA662
Asset affected: 000016000025-0000
Diagnosis
Processing terminated because the number of depreciation periods in
company code NOPE has been changed. However, you cannot change the
number of periods in your live (productive) system.
Procedure
Change the depreciation periods back to the original value in company
code NOPE. The number of depreciation periods is determined by the
fiscal year version and the use of half-periods. At least one of these
parameters was changed.
If you want to change your system so that you can now work with half-
periods, you have to use depreciation keys with time-dependent period
control in that company code.
If you need to make general changes to the number of periods for
calculating depreciation per fiscal year, you will have to consult your
system administrator

hi
If you refer to SAP Note 2993, it is not possible to change to/from half
period. This is because the expired useful life are based on 12 periods
and the system is not able to change this to 24 periods.
To be able to change this settings under:
Asset Accounting>Valuation>Fiscal Year>Use of Half Months in the
Company Code.
Company code must be in status 2 (Test company code with data transfer)
Once you have finished your legacy data transfer you should set company
code as productive to avoid this changes.
Regarding error AA662, it occurs if you change the number of period
in the fiscal year version or the use of half-periods, after you have
already posted to assets.
The cause is a different value in field ANLB-PERFY which
is the number of periods in the fiscal year. If the number
entered here does not correspond to the number of posting periods
of the fiscal year used, the system raises error AA662 (except
for none posted areas for which ANLB-PERFY = 000 or areas
with depreciation to the date for which ANLB-PERFY = 365)
If T093C-MONMIT = 15 (half periods), ANLB-PERYF = 012 is not
correct. It should be 24.
Please note that changing the PERFY value will not be sufficient because
the expired useful life is calculated on base of PERFY. Thus PERFY has
to be adjusted and the expired useful life also.
Blaz.

Cancel goods receipt after doing LIV

Dear all,
I find the system allow users cancel the goods receipt of an PO item after the LIV process is completed.
In business practice, it is none sense to reverse the goods receipt qty after the purchasing dept confirm the GR qty and payment to the vendor.
In my understanding, the purchasing dept should cancel the LIV confirmation first, and then cancel the GR document afterward.
Are there any control settings in MM to prevent users reverse the GR qty without cancel the IR document at first?
Best regards,
Chris

Hi
For GR-Based IV only a customizing is present to prevent such activities
Please check in customizing if the Config of For GR-Based IV, Reversal of GR Despite Invoice has been maintained, remove the flags if it has been maintained.
T.code is OMBZ.
SPRO-> Materials Management-> Inventory Management and Physical Inventory-> Goods Receipt-> For GR-Based IV, Reversal of GR Despite Invoice.
If your PO does not have the GR based IV Flag then GR can be reversed even if IR exists.
Thanks & Regards
Kishore

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

We have a situation where in an existing application after go live we need

We have a situation where in an existing application after go live we need to add a new dimention. The fact is after adding the dimension the existing data will not have any value against this dimension(will have only null values). If so will it create a problem in loading or reporting?. How to resolve it?.

My experience (on BPC 5.1 MS, and earlier versions) has been as follows:
1.) create a new dimension, with at least 1 member. Pay particular attention to which member is the first base member in the hierarchy. (If you're planning to have multiple hierarchies in this dimension, wait for now on the ParentH2 etc. Start with just 1 hierarchy until you've completed these steps.) Process the dimension.
2.) add that dimension to an existing application. When the application is processed, all of the existing data is assigned to that first base member of the new dimension.
3.) If that's not sufficient, and you want to assign some data to another member of this new dimension, either use the "Move" package, or write custom SQL script logic, to get the data assigned to the correct members.

TDS Payment entry after Go-Live.

Dear All,
My client goes live on 01.04.2014. In their legacy system they used to pass entries related to TDS payment is like
TDS -- Party A --- 100.00
TDS -- Party B --- 200.00
TDS -- Party C ---- 300.00
to Bank a/c --- 600.00
From this they used to get report like vendor wise TDS payment in their legacy system.
Now my issue is how can I post this entry in SAP , where I can get Vendor wise TDS report. I know that if we will follow TDS cycle as per SAP standard then we can get the report from J1inmis. But here I have to make payment entries after go-live where I cannot follow TDS cycle for cut over entries/data.
So kindly guide me to handle this issue .
Regards
Soumya

Hi,
Please do following steps :
1. Go to transaction code J1INCHLN
Click on Execute
Enter
Click on Document - Simulate
If entry found O.K click on Save (Post)
Clearing document
Go to transaction code J1INBANK
Select appropriate Challan
Click on
Pre - requisites
1. Maintain number range for object J_1ICHLNNO in J1I9.
Hope, this solves your issue else revert.
Regards,
Tejas

Blue Checkered Screen after using the Recovery Disks

I have a Compaq Presario SR2034NX XP Media Center computer. I followed the instructions and installed all the recovery disks. The screen then said to remove all disks and that it's going to reboot several times to finish the installation. During this process I got a blue checkered screen. I'm not sure what to do at this point. I took a picture of what the screen looks like and I'm enclosing a link to the picture here.
Click below to see the picture of what my screen looks like after using the restore disks:
http://bit.ly/ifajT6
Thank you for your help and time!

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Solaris 10 "No disks found!" -- but disks are, indeed, there!

I am attempting to install Solaris 10 on an E450. I have 4 18G SCSI disks installed in the E450.
When I boot from the install cd (Solaris 10 Install Disk 1), it boots up just fine, and I go through the initial configuration menu (networking, name service, kerberos, etc.), and when it gets to "Configuring System", it stops at 4% with the error "No Disks Found! Please make sure your drives are properly cabled and powered up.".
Clicking "OK" drops me into a terminal window. Running format at this point show all the drives are, indeed, there. I have reformatted and repartitioned the drives, but all to no avail.
Any ideas? Any/all help is MOST appreciated!

ALL
Found the answer!!!!
Seems that the Solaris installer doesnt understand EFI labels, and if (like me) you have been playing around with linux / freebsd ultrasparc ports, you may have inadvertently removed the backup partition (which spans the entire drive, 3rd partiton).
Without this format thinks its dealing with an EFI disk, and you can label it till the cows come home, the installer just doesnt want to know.
The answer is:
'format -e'
select the drive
'label'
select SMI
dont choose format.dat (unless it contains your drive .. unlikely)
choose SCSI 2 autodetect.
partition as per admin manual.
You may also have to do an 'installboot ...etc etc.." <a href="http://docs.sun.com/app/docs/doc/817-5093/6mkisoq39?a=view" target="_blank">http://docs.sun.com/app/docs/doc/817-5093/6mkisoq39?a=view</a> explains it I can now install Solaris 10 The Sproggg PS: I reckon that a brand new drive might need the same treatment.... YMMV PPS: if your disks are over 2 tb they have to use the EFI labelling method ... if you have these you can afford your own sun support contract to figure it out....

How to keep Track of the Changes after Go live in OM

Hi Experts,
Need one information, after Go Live, PPOME is used by the end users for tracking or updating daily changes. While making he changes do we also need to keep a copy of the changes made in the Development server or it is fine if the changes are seen only in Production system.
If any body has made changes to the existing Organization and Staffing, how do we keep a track of who has done the changes is there any standard report through which we can get the information.
Please advice.
Regards,
Subbu

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How I can to put Solaris on a disk 34 Gb?

I have a AcceleRAID (Level 5) 34Gb
Is it possible to put Solaris on a disk 34 Gb.
It is impossible to me.

Try to install this patch.
http://sunsolve.Sun.COM/pub-cgi/retrieve.pl?doc=fpatches%2F110202&zone_32=IDE
Hope it helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Adding Non-Leading Ledger after Go Live

Greetings SAP'ers,
We are 2 months live with one of our Central American entities and we have New GL active, document splitting, etc., and now we find out we need a non-leading ledger for one of the countries for local reporting. Does anyone have experience adding a non-leading ledger after go-live? And if so, what are the implications of the documents already posted to that company code. Is there a migration of posted documents? The documentation is unclear as to whether this can be done.
Please let me know your experience.
Thanks,
Jim Steinle

Hello
As far as I know, One company many company codes can have only one leading ledgers and non leading ledgers for each company code.
In your case, you have not assigned a ledger to the company code. So the data must have been in the leading ledger.
And now if you assign, all the data henceforth would go to the ledger, but not sure of the past data.
Suggest you to create in quality and test check.
If it does not work out, then there should be note specifying a program to revive the data from leading ledger ?
Reg
*assign points if useful / I am not sure if it is really useful

After Solaris live upgarde disks unavailable

Similar Messages

Maybe you are looking for