After trying to update my i-Pod Touch it is not being recognised by iTunes and is stuck on the "Connect to iTunes screen". What do I do?

So after updating iTunes and attempting to update my iPod Touch, a message came up telling me the update for my iPod had failed. I checked my iPod to see that it was now showing the "Connect to iTunes screen", and was no longer showing up on iTunes.
I then:
Restarted my computer
Uninstalled and reinstalled iTunes
Attempted to put my iPod into recovery mode.
None of these made any difference. Any help on what to do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen                         
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up     
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
  Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

  • My ipod touch 4g is not being recognised on my new toshiba laptop. The ipod touch starts charging then stops. This keeps continuing. Please help.

    my ipod touch 4g is not being recognised on my new toshiba laptop or itunes. Its not being shown on my computer and its not shown as 'unspecified' in the 'devices window'. The ipod touch starts charging then stops this keeps continuing like a ongoing circle. Please help.
    I have tried on my family members laptop and its seems to be picking up. So the ipod or the usb wire is not the issue.
    I have tried everything from reinstalling itunes and updating windows.
    I have tried the diagnostics test and its still says the ipod cannot be found.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT4623 After trying to update, my phone will only show that i should plug into itunes?  What should I do?

    Why is my phone stuck after downloading the newest update?

    Most intelligent people would plug the device into the computer running iTunes as suggested on the screen and follow the on-screen prompts.

  • HT201210 my phone will not turn on after trying to update now all it does is tells me to plug into itunes i have done this and still does not turn on

    my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

  • IPod touch not being recognised by iTunes, recognised in "My Computer"

    Hello,
    I am running Windows 7 Ultimate, I have iTunes 10.
    I have tried restoring the iPod touch, I have tried switching it on and off. I have tried with each USB port, my security settings are fine. I have uninstalled and reinstalled iTunes, I have restarted the computer. I have reset the ipod.
    It has still not been recognised by iTunes.
    What can I do to get the iPod touch to be recognised by iTunes?
    vvv on "My Computer" at the bottom I can see this. Here I can access my DCIM folder, which contains some photos and videos.
    iPod information; Version: 5.1.1 (9B206) Model: MD057BT
    6GB 4th Generation
    Thanks,
    Aimee.

    So the Apple Mobile Device serviced is installed and running on your system? You tried to uninstall and re-install iTunes and all Apple related software? 
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Simply responding yes doesn't do much to help.  We need as much detail as we can get in order to help you troubleshoot this issue. Otherwise, we are just pulling at straws.
    B-rock

  • Ipod touch 6.1.3 not being recognised by iTunes 10.7

    Just got a secondhand iPod Touch. It is on 6.1.3 and I have iTunes 10.7 running on my iMac 10.6.8.  As far as I can see 6.1.3 is supported on iTunes 10.7.  I tried the Apple trouble-shooting page but to be honest it wasn't that helpful.
    If I set up Home Sharing then I can Home Share using the iPod Touch...which says that I do have connectivity at some level.  Just that it is not being recognised by iTunes and so I am unable to load my apps or transfer any music over.

    Many thanks lllaass
    I had gone through the first part without success but had decided not to go through the second stage. But following your recommendation I did just that and it works!

  • HT1459 my ipod touch 4th generation is completely locked out. its not being recognised in itunes for us to do a restore. how can we reset the ipod?

    can anyone help with a completely locked down ipod touch 4th generation? its not being recognised in itunes!!!

    Download RecBoot and see if that will kick it out of recovery mode.
    Try doing a manual install following the instructions in the link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • My iPod 5g was updating to 8.1 and is stuck on the "Connect to iTunes" even after updating. iTunes isn't reconizing that it is plugged in and I tried to reset, restart... nothing is working. Help?!

    iPod 5g
    iOS 8.1
    I think it finished updating(can't be sure) but is still stuck on the 'connect to iTunes' screen

    Magically, my ipod touch opened this afternoon.
    Through two weeks I tried several things like push power button for couple of minutes then push power and home button together for a couple of minutes. I replied this for a few times in a day. Also I put charge for 2 days after I firstly recognized my ipod is black out. But for a long time I didn't try charge for a long time (just half an hour etc.)
    I put charge at morning today then when I came home at afternoon ( approximately 12-14 hours) my ipod touch was full charged and opened.
    I promised that I will write my solution. I'm not sure this is a solution or not but my ipod touch is alive now.

  • After trying a software update it froze midway and is now not responding and not being recognised by itunes. Help!!

    Hi
    My 3rd Gen Ipod Touch was undergoing a software update when it stopped and itunes threw up a message saying "Update cannot be completed due to an unknown error". I disconnected and reconnected the ipod, and itunes suggested I restore the ipod. I started the restore and it froze midway and again said "Cannot be completed due to unknown error". The ipod is now frozen with the apple logo and an empty progress bar. It is not responding to anything. Windows is recognising it by opening Itunes but Itunes is not showing the divice in the pane. I dont know what to do! Please help!

    See Here for Device Frozen
    http://support.apple.com/kb/ts1445
    Device Not Recognised
    For Mac
    http://support.apple.com/kb/ts1591
    For PC
    http://support.apple.com/kb/TS1538
    And Here for further help:
    DFU Mode
    Open iTunes and Connect the iPhone to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • TS1538 After trying to update to IOS 7  Ipad Mini is not shownig up in any windows based pc/laptop. what to do. Now charging externally is ok but no pc connectivity.

    My new I pad was working fine till update was downloaded. After 1.12 Gb data was downloaded through Wi-Fi when tried to install it was not taking place & error meassage-network not available was coming. I tried to connect to my windows pc with windows 7 and first it recognised the i pad & through i tunes when tried to update the IOS after few hours of downloading the dat again ,now ipad is not visible & when connectedto any pc showing usb device not recognised. Please suggest what to do.

    have you updated itunes on the computer to the latests version ?

  • IPOD TOUCH  4G IS NOT BEING RECOGNIZED BY ITUNES NOR WINDOWS 7

    Hi... I have been using my new ipod Touch 32G  4G for almost two months now, and It has been working great... but for an unknown reason my itunes 10.4.10 (I use a PC with Windows 7 ultimate 32bits in it) stoped recognizing it, and so has my PC... when I plug the ipod to my computer, if I have itunes open, it freezes... if I unplug the Ipod, it start working ok ( I mean itunes)... and once I plug the ipod to the computer it recognizes it as a camera device.. and if I look for it it wont show in (My Computer)... As I said... this happened just a few days ago... it was working OK before... I have re installed several times the last itunes version and even though it works with out the devices conected... once I connect any apple device ( ipod Touch 2G, ipod Touch 4g and an ipad 2G) it wont recognize any of them... the ipods frezze itunes, the ipad doesn´t frezze it, but It doesnt show there either...  What could have happened ?  What should I do ?  I have checked the drivers, uninstalled and installed them again, I have unisntalled and installed itunes several times now, i have tried the devices in other computers also with Windows 7 and they are working OK, so its itunes so is not the cable nor the ipods or ipad...
    I dont know what else I can do ...
    Would someone please have any ideas on how to solve this ?

    I had the exact same problem...and literally, even after calling Apple Help this morning and them emailing what was supposed to fix it, I was still stuck in the same boat. However, after much searching, I found a post on the internet, did what it said, and, as of this morning, my iPod, and my kid's iPods, are now recognized.
    Since the most recent iTunes update none of our iPods are recognized by iTunes. Our PC is smart enough to recognize my iPod, but iTunes is not.
    After MUCH aggravation....AFTER trying all the fixes outlined by Apple Support, AFTER contacting Apple Help and doing what they said, NOTHING WORKED.
    I searched the internet again and found the simplest of instructions. They explain that with the new iTunes update some iPods are being recognized as digital cameras rather than iPods, which mine was doing. This is how I fixed it. Do not have iTunes open.
    Attach your iPod to your computer.
    1. Open the Device Manager. (To do this right click on My Computer or Computer, click on Properties, and then click on Device Manager).
    2. Find your iPod. Normally it will show up on it's own, but since your computer is recognizing it as a digital camera it may be under something else; mine was under Portable Devices.
    Even though it is saying drivers are up to date based on all Apple Fixes, you DO HAVE TO MANUALLY UPDATE DRIVERS...and this is what you have to do!
    3. Select the Apple iPod by double clicking on it when you find it.
    4. Select Driver on the tabs and click on Update Driver.
    5. Choose Browse My Computer for Driver Software. Once opened, you must locate this file: Program Files\Common Files\Apple\Mobile Device Support\Drivers. Select that folder and Click Next. Once the update is complete, unplug your iPod. Wait 30 seconds and plug it back in...your computer should now recognize the iPod.
    To whoever found out about this fix and posted it online, THANK YOU!!! I have spent hours and hours following Apples advice to no avail...but this fix, posted online by someone else, DID work...so thank you for posting it...and I am just passing it on!
    Let me know if it works for you...it takes all of 5 minutes and it worked for me this morning!

  • Touch not being recognised by itunes only autoplay, frustrating!

    Ever since I downloaded Itunes 8 my ipod hasn't been recognised by itunes and keeps coming up with autoplay or digital camera whenever I plug it in. I have tried uninstalling itunes, reinstalling it, resetting my touch, stoping and starting the device, disabling it in device manager, uninstalling it in device manager, updating driver details (though it gives me more options to open it as another device though it warns strongly against it as it might cause my system or touch to stop working properly). I'm sure it is more a problem with my useless laptop more than itunes 8 but I can't think how to fix it. I'm so tempted to wipe my comp and start everything again.
    Thanks for any help.

    Sorry I do not have an answer but I am getting exactly the same problem.
    I have 3 iPods and am running the latest version of iTunes.
    2 of them connect without a problem (80Gb Classic and 1Gb shuffle) however I have just got a brand new 8Gb (4th Gen) nano and this will not appear in iTunes.
    Problem: Autoplay runs every time with the nano and occasionally I get messages from iTunes that the iPod needs to be formatted for windows or is corrupt and needs restoring. I do this and the iPod restores but then does not appear in the iTunes window after restore.
    Windows XP seems to think it is a USB disk and runs Autoplay everytime I connect.
    I have tried changing the assigned drive letter in case of conflict andalso disabling autoplay but nothing has helped. I have sent the nano back to apple and it has been returned saying everything is fine.
    It should not be this difficult!

  • My iPod touch is not recognized on my computer and is only showing the connect to itunes screen.

    I don't know what to do. It was working fine yesterday but now it won't recognize it anywhere and only shows the screen "connect to itunes" which it won't let me do.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Then as necessary
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod Touch won't connect to Itunes, and is stuck on the connect to Itunes screen, can't do anything on it.

    Hey,
    I bought my Ipod about 6 weeks ago, and after lending it to a friend to put some software on it, it's stuck at the screen with a usb cable then an arrow pointing to the Itunes logo, and when I connect it, Itunes doesn't pick it up, I'm sure it needs restoring, but I can't as Itunes doesn't pick it up. I've re-installed Itunes but still nothing.
    Help would be greatly appreciated as I'm going to a deserted mountain in Ireland for a week in a couple of days, and will need it ! (:

    Ok I yhink the different computer thing is working, I connected it to my mums and it's restoring, though I think her version of Itunes is quite old, and it's saying it's an Iphone, but it is restoring so far.  Thanks!

  • New Ipod Touch not being recognised by itunes

    Hi, can someone please help!
    I purchased a new iPod touch (the one with the camera )the other day and yet so far iTunes nor my computer has recognized it.
    I have tried many things:
    Updating itunes
    Uninstalling and reinstalling itunes
    Unblocking itunes related software in my firewall
    Trying different USB ports
    Turning ipod off and on in different ways
    Restarting computer
    Using different usb cords
    Nothing has worked so far! My computer meets the requirements i think. Its a windows professional with a service pack 3 and it has usb 2.0 ports. I have a working itunes account and store and i have itunes version 10.1. My ipod has full charge also
    My computer makes the noise when something is plugged in, yet my ipod is not appearing under devices on itunes. My old nano is being picked up fine yet my new ipod touch isnt!
    I dont know whether i should return to the store i purchased it at or if it is a computer malfunction thats the probelm.
    Please please help! I've reached a dead end!

    Try it on another computer.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Maybe you are looking for

  • Auto switch from tray 1 for envelopes to tray 2 for letters on HP Officejet Pro 8500A Premium

     Hi I have a HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n My Operating System is XP Media Center.  I haven't been able to get it to switch from one tray to the other automatically. Also  it only remembers 1 type of paper at a time. I c

  • Is It Safe to use an old Disk Utility on a new OS HD?

    Hi - Maybe I'm too concerned about this but I need to calm the obsessive-compulsive within. I'm in the habit of verifying permissions on my 10.4.9 system (G5) via Disk Utility (version 10.5.6) before and after every install or update. On occasion I'v

  • Purchasing an external monitor--resolution?

    My ibook's backlight cable is pinched. Rather than pay for the repair (I'm already planning on upgrading this spring) I thought i'd buy a Dell external flat-panel monitor to mirror the image from the dark screen. That way I could use this new monitor

  • How to: eliminate PDF files from showing up in my picture folders?

    I am using Windows 7 and I save all my pdf files in various folders located in the "Documents" files.  These same files are then showing up in my "pictures" files.  I have no need for this and it is unnecessarily filling up my picture files.  How do

  • File with header

    hi, i have to upload file which has header in the first line. and from second line the actual data will be there which is to be uploaded. now the problem is hove to move this file data to internal table with header, can any one has code plz send me.