After updating my wife's iPad to iOS6 the ipad will not connect to wifi on certain wireless routers. What can we do? Also, same for iPad mini with same router. But iPhone that has iOS5 has no problem connecting.
Need help. Before updating to latest software iOS6 the iPad had no issues connecting on our home router. After updating the iPad will not work. We have a mini iPad with same issue. But I have a iPhone 4S that I chose not to update to iOS6, still has iOS5. It connects no problem to router. Our computers have no issues connecting to router either. There is a software issue with iOS6.0.1 that will not allow certain routers to communicate. What can I do? Also, the mini iPad stated a newer version of software is out, version 6.0.2 which is supposed to correct the wifi problems. It has helped but still haven't connectivity issues. However, the iPad states software is up-to-date so we cannot update to 6.0.2 even through connecting to computer on iTunes. How can that be?
Try going to settings, reset , reset network settings.
Similar Messages
-
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
-
In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???
It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet. -
When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?
There are two different types of adapters by Apple that look similar. One is a 5 Watt adapter used with iPhones and iPods. The other is a 10 Watt adapter used with the iPad. Other than looking at the text on the adapter, which is hard to read, you can tell the different by looking at the socket the pin part plugs into the adapter. The 5 Watt has two notches and the 10 Watt has only one notch.
Make sure you use the 10 Watt adapter with an iPad. -
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
I burned cd's in iTunes. The songs were able to sync and play on my iPad. After this, exclamation points appeared in iTunes on my laptop (unable to find source). They still play in iTunes but will not sync with my iPhone 4S. Do some cd's have a limit on the number of times you can copy them or is this an iTunes problem.
KiwiLouisa - I had the same problem. I was eventually able to distribute my content that was "Not eligible for iCloud" to my iPhone by switching off ITunes Match in both the ITunes app/machine that hosts my library (my Macbook Pro, in this case) as well as on the device to which I wished to distribute my content (my iPhone 6+). This opened up the option for my device iTunes Music settings for selecting "Entire Music Library".
After I successfully transferred *ALL* my music and music videos via iTunes sync, I then again switched on ITunes Match in iTunes on my Macbook and on my iPhone.
This does not change the iCloud status, but at least I have the content on my iPhone. -
My Iphone 4 has locked me out. Homescreen will show up but cannot get slider to open keypad. SOmetimes if I tap enough things the key pad will display. When I enter the passcode it will not register. If I hit each passcode number twice it will register but then tells me I have the wrong code. I also have boxes and rectangles that appear to highlight items which never used to come up. Anyone have any experience with something like this?
Wow! Its impressive for you to load iOS 4.2 onto the iPhone 4S. How did you do that?
Moving along, press and hold both the power button and home button together for about 10 seconds. Then, press the power putton to turn it back on. -
After automatically updating to 32.0.3 last Thursday and this Monday on all our Staff and Patron computers both Win7 pro and XP pro we have seen Firefox sessions that will not bring up the Print Dialog. The Print Preview dialog will come up but no print button or print menu item will bring up the Print Dialog. After you close Firefox and reopen it the Print Dialog box will work again for some time. The websites that Patron and Staff use during a session are different and done seem to be the cause. The Firefox settings are at fault because a simply restart of just Firefox fixes the issue and no other web browsers or application has any problem with displaying the Print Dialog at any time. Again this began on all the computers as soon as 32.0.3 was installed automatically over night.
Hi NPLD,
Thank you for your question, I understand that there are multiple computers that no longer have a working print dialogue after a while of using Firefox. However after a restart, the print dialogue continues to act normally.
Does resetting the printing settings on the affected computers only temporarily change this as well?[[Fix printing problems in Firefox]]
I noticed it when I tested this page: [http://www.housebeautiful.com/decorating/home-makeovers/1920s-home-before-after?src=spr_FBPAGE&spr_id=1451_94608649#slide-2] However I cannont reproduce it all the time. The print icon in the page has a opened a printable view and then the print dialoge comes up. When I switched to another program, that icon did not open the preview.
Do you notice any about:config entries that change when you see this start to happen? -
I recently updated my iTunes to 11.0.4.4. After doing this, my ipod touch 4Gen will no longer sync as it gives me a statement about the system not having enough memory left to sync ["The iPod...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 2.73GB required)"]. It has 7.96 GB free on a 32GB iPod. It synced just fine prior to the update and I did not add more than 7.96 GB of files to the library after updating iTunes. Please Help! This is a fustrating situation where I can not sync my music, or anything else for that matter, with this issue. Thanks in advance for all your help.
Illaas,
I tried the manual method. I was able to set the music/video to manual and then restarted the entire system. After restart, I re-attached the ipod touch to the computer. The sync automatically ran for everything that wasn't set to manual and it completed without a problem. I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again. This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported. I've never had to do this before, but I will keep it in mind if something like this happens again. Thank you for pointing me to the manual sync. -
After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
After update to version 1.1.1 getting the message "Do not disconnect"
I updated my nano to version 1.1.1. After the update the message "Do not dicsonnect" doesn't disappear. I couldn't remove safely the nano from Windows XP and can't see it in iTunes. Restarting the updater doesn't work. Resetting nano doesn't work. Every time I connect the nano to my USB port I get the same message.
Any ideas?
Thanks
Windows XPCheck my "Problems Solved" post above. Helped me...might help you.
Jo Space
Dell Inspiron Windows XP -
After Updating to IOS 5, My Ipod Touch 4th Gen will not Sync!!
I updated my Ipod Touch 4th Gen to the ne IOS yesterday, and as soon as I did, I ran into a BIG problem. It will not Sync up with my Apple content on my Itunes what-so ever. I cannot even install any of my Apps, download my music, nothing! I do not even know what to do at this point!
Contact a lawyer if you want to sue.
Otherwise try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HT4993 After updating to iOS 6.1.3 my mail apps will not open. Help!
My mail apps will not open the update. I have tried deleting my mail accounts and reinstalling, but still no luck.
Close out of the mail app, double tap the home button and completely close out of it.
Try a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up. -
My iPod is stuck on a screen that shows me to connect to iTunes and it wont do anything else...What can I do?
Try:
- First
Connect to computer and restorer via iTunes
For how to restore:
iTunes: Restoring iOS software
If still problem
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Since updating to ios 7 my itunes on the handset will not load any pictures/detail?
Since updating my ipne 4s to the new ios 7 i cannot get the itunes on the handset to work, no pictures/detail appears just along the bottom of the screen , music, film, search etc. I've also installed the latest update if itunes but it still doesnt work. Does anyone know how to fix this please?
Hello there Jodie1979,
Thank you for using Apple Support Communities.
I have a few recommendations to try to get iTunes to load fully.
First, close all the open apps:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists after that, try resetting your network setting, then test iTunes again.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
And if none of that resolves the issue, I would next backup to iTunes and before you restore your phone, set it up as new and test iTunes to make sure that it works. Then restore from your backup and verify it still works.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
All the best,
Sterling -
The music app on my iPhone 5 will not sequence through albums or playlists. It plays either the first or selected song over and over again. What can I do?
Turn off repeat.
This is covered in the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Play the song, tap the screen, tap the repeat icon until it is white= off.
Maybe you are looking for
-
Content-Length header not changed after url-rewrite... yields cut page.
We use iPlanet6 ,service pack 4. The pages that return from the servlets are changed by the Application Server. The Application Server adds GXHC_GX_jst=901a10a6662d6164& to the all the URLs (which increase the page's size). The problem is that Applic
-
RH9 - window caption not correct in generated html-output
I installed RH9 and opened an existing project coming from RHX5 in the new RH9. When generating HTML Help, the window caption of the output displays "HTML Help" instead of the name I gave to the default window (in my case: "Rimses 5.6 Help"). In RHX
-
Heeeelp!!!!!! Outlook Calendar Synchronization problem
Hi: I have a curve 8900. I used as a PDA and phone, so far no BIS or BES, cause I am working in a country with no blackberry services. Until a few days ago, it was working ok synchronizing all contacts, tasks and calendar appointments. Now I cant syn
-
I keep getting this message when buy credots for clash of clans on iphone through itunes which is tied to my credit card.
-
Hi, I've built a fullscreen-html-diashow (landscape) with hype for usage in dps apps for iPad which can easily be adapted as kind of framework. Navigation by swiping left or right, buttons, simple tapp on image or tapping one of the thumnails. Capt