After upgrading from FDS to PDS, License Manager says LV 7.1 is registered, LV 7.1 itself doesn't -- what do I do?

About a month ago I installed LV 7.1 FDS, and activated the license for it. Today I received the PDS, installed it over my FDS -- perhaps this was my first mistake -- and LV 7.1 tells me its unregistered when it runs, but the license manager tells me the product has been activated.
I tried deleting the LV license (.lic) file, but then the license manager does not even recognize that LV is installed and so it does not allow me to try to activate it. Is there a "blank" or "unactivated" .lic file I can replace my existing one with to allow me to fully activate LV?
Or does it really matter that LV tells me it is unregistered?
My apologies in advanc
e for asking a question that may have already been answered; I have gotten frustrated trying to come up with the right set of keywords to find the answer to this problem through the search engine!

The registration information seems to have been corrupted by the second installation. You should always uninstall before installing the new version.
Here�s a KnowledgeBase that describes how to register LabVIEW in the case you keep getting the �Unregistered� screen
Best regards,
Philip C.
Applications Engineer
National Instruments
- Philip Courtois, Thinkbot Solutions

Similar Messages

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

Expiration date not displaying after upgrade from 2007 to 2013

I recently upgraded from MOSS 2007 to 2013. I have information management set up on a library of InfoPath forms. For the forms that were created prior to the upgrade, the expiration date is displaying and actually get updated if I modify them.
But none of my forms that have been created after the upgrade, are displaying when the expiration date is, which should be one year from modify date. If I modify the forms created prior to the upgrade, they reflect the new, update date.
Are these new forms not getting the policy applied to them, and why not? I am not sure why the older forms are getting updated, but not my new ones.
Denise E.

Hi Denise,
According to your description, my understanding is that the Expiration date column was not displaying values after upgrading from SharePoint 2007 to SharePoint 2013.
Per my knowledge, we can only use the date column which is added to the library or list or the Declared Recorded date to set the retention policy, so if the Expiration date is used in the retention policy then the Expiration date should be a column in the
library or list.
I recommend to check the retention policy in the library and see which column is used in the retention policy as the image below shows:
After that, go to the Library settings to find this column.
Could you please provide screenshots of the retention policy and the columns in the Library settings page?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to change table defnition after upgrade from 9 to 10 ?

after upgrade from 9 to 10, tables ddl still like 9i:
.................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
Thanks

What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
HTH
Aman....

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Youtube videos don't play after upgrading from 3.x to 4.0.1.

Youtube videos no longer play after upgrading from Firefox 3.x to the new 4.0.1.
The youtube page loads completely but the video never starts.
Firefox displays the page like its done downloading the video, but no video.
It displays as "done" loading the page with no activity in the page tab or bottom bar... but the video screen is black. Everything but the video loads.

Hi There
I seem to have experienced the same problem, after applying the APEX 4.0.2 patch, my theme produced errors on the new type of date picker. I use the Bravo theme.
I am now trying to purchase the Delta theme, but unfortunately I see today on the Apex-Themes website that the themes are not available to purchase anymore.
Did you manage to resolve your issue? And do you maybe by any chance know where I can get hold of the Delta theme now?
Regards
Marissa

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

After upgrading from FDS to PDS, License Manager says LV 7.1 is registered​, LV 7.1 itself doesn't -- what do I do?

Similar Messages

Maybe you are looking for

After upgrading from FDS to PDS, License Manager says LV 7.1 is registered, LV 7.1 itself doesn't -- what do I do?