Agent disappears from Supervisor Display

UCCX 8.5
I have some remote CAD agents who connect via vpn. One in particular always behaves the same. In the Supervisor Display she is counted as "Logged In" but her name will disappear from the Agents and Voice CSQ-Detail displays for 30 seconds. She will then reappear for 30 seconds and this repeats as long as she is logged in. She is able to answer calls, some for over twenty minutes.

It could be the VPN is blocking TCP ports 59000 and 59020 required for the chat communications. I had this happen when a firewall between 2 networks was blocking ports 59000 and 59020.
Bill

Similar Messages

  • Agent disappearing from Supervisor Desktop

    Greetings -
    Can someone help find a solution to my below problem..
    Environment:
    Cisco Unified CCX premium
    9.0.2 SU2 version
    Agent desktop: 9.0(2) (Premium); Build: 9.0.2.2021
    Problem:
    We have three agents out ten who regularly disappear from supervisor desktop.  I opened a TAC case with Cisco but could not figure out what is causing the problem.  The agent desktop is installed on Win7 64bit, Kaspersky antivirus and no firewall between UCCX and agent.  Between UCCX and agent, we have a Cisco 4500 connecting 6500.  I also opened a case with Cisco switching team to check if switches have any role in agent disappearing, but nothing was found on the switches.  It is interesting that only three users are affected out of all.  The affected users' logs on to CAD without any issues in the beginning of the shift, however, after couple of hours i.e. around 11 am agents start to disappear from the supervisor desktop.  After the agent disappears, the CAD chat windows appears like below and the <Unavailable> status in the chat windows changes constantly every 10 seconds to <Initializing>
    The UCCX capture shows the following:
    <AGENT_DESKTOP_user11>.  The application will be logged out.
    2014-08-20 03:09:46:249 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application <AGENT_DESKTOP_mwoods>.  The application will be logged out.
    2014-08-20 03:09:50:021 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application 
    The agent logs shows that the heart beat is sent to the UCCX but UCCX dose not receive anything.  While all these are happening, the user can still receive and answer calls, the supervisor though cannot see the user, the reports she runs displays user metrics.  However, after few hours, the agent will appears again on supervisor desktop or re logging will make the user appear again.
    Has anyone experienced this strange issue? 
    Thank you in advance.

    Thank you for prompt response. 
    What I did few weeks ago was, created a new account, assigned queues to that new account and then asked the used to use that account just to check if the issue is specific to user account.  Even then, the agent (newly created account) was disappearing. 
    I am sure if I ask the user to use the working agent account, will not have a problem.  I will have to check with the supervisor if they want to try this out.  I will update you momentarily. 

  • UCCX 9.0 Agent is appeaaring and Disappearing from Supervisor

    We have installed anew setup and the issue is Agent is appeaaring and Disappearing from Supervisor. As per observations, this is happening every 20 second. Is there a timer in config or something?
    we have checked no firewall and antivirus in between.
    Any suggestions please

    Hi Hina,
    This always happens due to one of the following:
    ++ Different versions of CAD or CSD other than the server - check the version of CAD or CSD and check the compatibility matrix to verify if that is the same for the UCCX version you are running
    ++ Anti Virus - A big culprit sometimes. Recommended test would be from a PC without these settings.
    ++ Firewall - Connectivity to the Cisco Desktop Call Chat Service.
    Check for the following ports for the UCCX Server:
    3001 - Call Chat Service.
    3002 - Call Chat Service for Clients over VPN.
    These need to be accessible or open for the server from both the CAD and the CSD.
    ++ Citrix or Thin Client.
    If your clients are on thin client such as Citrix or MTS, then check the Port Utilization guide for the ephemeral ports to be open.
    Also check the Post install.exe file to have the parameter Thin Client Environment set to Yes.
    HTH
    Regards,
    Arundeep

  • Diagnostics: Agent disappearing from system landscape

    Hello,
    I want to monitor my Enterprise Portal (EP7) and use Root Cause Analysis for it.
    I installed the SMD Agent on EP7, diagnostics is running on SolMan (SM7).
    Now the strange part:
    Whenever I start the Agent on EP7, I can see it for a short time in diagnostics (e.g. in the landscape management or in the managed system setup wizard).
    But shortly after (between 30 - 60 sec.), the agent disappears from diagnostics. Although it is running all the time, it does not show up anymore.
    Diagnostics says, the agent is not connected resp. does not found an agent. But it's up and running (and was visible just seconds before) on EP7.
    Anybody any idea, why this behaviour occurs?
    Thanks and Regards,
    Jan

    Hi,
    We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
    But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
    Regards,
    Srikishan

  • Contact Center Agent disappears after logging in

    Greetings,
    I've come across a strange issue happening with one of my users.  She will attempt to log into the 8.5 UCCX agent.  Once she logs in, the agent disappears from the desktop completly and isn't in the systray either.  If I start the task manager on her computer, I can see the agent*32.exe process running, but it can't be found anywhere.
    I've uninstalled the agent, reboot the computer, and then re-installed.  Unfortunately this didn't resolve the issue.
    Has anyone seen this issue and figure out the probelm?
    She is running Win 7 64-bit and the agent version is Build 8.5.1.312
    Thanks

    Hi Joe,
    Please check if the Stealth mode is enabled in the Desktop preference.
    Desktop Preferences
    If your administrator configures your toolbar so that you have access to the Preferences button, you can change your Agent Desktop window behavior and accessibility options
    To set your desktop preferences:
    1.Click Preferences on the toolbar. The Desktop Preferences dialog box appears.
    2.Select the preferences you desire on each tab, and then click OK.
    Reference: page 30
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cad85ccxug-cm.pdf
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

    I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

    It is locked to your sisters carrier.
    She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

  • ERMS: Inbound mails are not displaying in Agent inbox from IC web

    Hi Experts,
                       We are implementing ERMS solution.. in CRM 2007 system. I am not able find the inbound mails in Agent inbox. I have done the below settings..
    1. Mail settings has done by BASIS team and whenever i sent a mail to ( cust@example) from my out look i can see the mail in SCOTT.
    2. I have done the inbound distribution for the mail id customer@example to ERMS support2 BOR object
    3. I have followed the rest of the steps from  "ERMS_How_to_guide " document.Hope all the set up inplace according to the document.
    Pleasse provide me some inputs what may be the reason for not displaying the e-mail in Agent inbox from IC web. Thanks
    Regards,
    Lakshmana.P

    Dear Loy,
                     I have checked the org unit settings in CRM_ERMS_WF_CUST and its fine.  I have checked the E-Mail work bench from IC_Manager role and i could find the mail which i have sent with the status 'In Que'. If i go inside by clicking the hyper link of the mail which is received into the inbox i could find the below mentioned log.....
    History
    Processing policy DEFAULT
    Reading policy:DEFAULT, context:ERMS, variant:DF5E7293EB4DCAF1A06F001CC4A95D40
    Processing rule container Default ( DF699C3B335A43F1A06F001CC4A95D40 )
    Processing rule ( DF699C3B335A44F1A06F001CC4A95D40 )
    Uncompiled Rule: ORDF699BD5A68602F1A06F001CC4A95D40892ED53F41EDBB56E10000000A1550DECONTAINSCompiled Rule: xpath address:/parts/EMAIL/EMAIL_CONTENT/text()
    xpath value:invoice test Regards, Laxman ________________________________________________________________________ __________________ A/S, parken 40-42, UK-2750
    Rule evaluates to TRUE
    action added: ROUTE ( GROUP = S:50000025 ) CREATEIR ( DESCRIPTION = ERMS IR )
    BOR: returned from Service Manager
    Kindly provide your inputs what may be the reason not to get inbound mails into IC agent inbox. Thanks
    Regards,
    Lakshmana.P

  • Desktop files disappeared from displaying on the Desktop

    My existing Desktop files disappeared from displaying on the Desktop--the files still exist, and newly added files appear on the Desktop; I did not enter any "hide my files" command. How do I have them display? Running OS X Yosemite 10.10.2

    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists to your desktop.
    Re-launch Finder by restarting the computer and test. If it works okay, delete the plists from the desktop.
    If the same, return the .plists to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

  • Ical program has disappeared from my computer.  The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    ical program has disappeared from my computer. The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    Mark,
    To reinstall iCal:
    1. Insert the Snow Leopard Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the Mac OS X 10.6.8 Update Combo v1.1 to bring iCal up to the most recent version.

  • HT4623 The iOS 7.0.6 update failed, my iPhone 5S disappeared from iTunes and now is displaying the picture: iTunes and a USB plug. Turning it Off and On didn't fix it. iTunes doesn't see it. Any suggestions?

    The iOS 7.0.6 update failed, my iPhone 5S disappeared from iTunes and now is displaying a picture iTunes logo and a USB plug and black backgraound. Turning it Off and On didn't fix it. iTunes doesn't see it. Any suggestions?

    Thanks, Lawrence.
    I've tried http://support.apple.com/kb/HT1808 and other suggestions first, which turned out unrelated.
    I've finally fixed the issue by plugging the cable in the USB 3 ports in the back of PC instead of the ports in the front, the iTunes saw the phohe and the recovery started automatically.
    In the hindsight, I realized that the either the required prerequisite iTunes 11.1.5.5 update installed a USB driver incompatible with my PC's front side USB ports that I always used for my iPhone syncing prior or it was always
    incompatible, but worked in all modes except the recovery.
    Cheers,
    Michael

  • Weird User error - Items disappear from Workflow inbox when refreshed

    Hi All,
    One of our end users gets this error -
    He logs into business workplace, and clicks on one of the items and exits without doing anything - on refresh the item vanishes from his workflow inbox - not visible in any sub folders or Outbox (Work items exceuted by me).
    Same thing occurs when he clicks on the "Reserve" or "Replace" icons for an item and does a Refresh. The item disappears from Inbox.
    Tried to swtich off the Preview pane and refresh - same occurence.
    Tried to refresh / reserve from another computer and the same thing occurs.
    Is this a problem with the GUI / user profile?
    Any pointers highly appreciated.
    Rgds,
    Rahul Kochhar ([email protected])

    Rahul,
    Welcome to SDN Forums!!
    Is the user in question a selected agent for the work item(s)? Does this happen only for a specific user? If so, it could be an authorization issue. Check for any failed authorizations (SU53) for the user. What is the status of the WI when it disappears from the inbox? If in error, check for error messages in the technical display of the WF log.
    Cheers,
    Ramki Maley.
    Please reward points if the answer is helpful.
    For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm

  • Suddenly Genres column disappeared from List view

    Hi guys,
    I'm still running 8.0.2, and I can't figured out what happened; Genres column is disappeared from the list view and I couldn't find anyway to show it again.
    I also tried to reinstall iTunes 8.0.2, but nothing changed.
    Anyone know how to solve the problem?
    Thanks!

    Ok, just to make sure that I understand. In the list view in iTunes 8.0.2, you see artist & album column. In iTunes, just as the list starts it indicates what is listed in a gray bar. Right click on the bar & a menu should appear. From that list choose what you want to have displayed. The genera should be one of those options.
    If you are still experiencing issues at that point try the following article on Apple's support page:
    http://support.apple.com/kb/HT1224
    This will show you how to properly remove iTunes from your computer. After trying all of that with out any luck, call the support number & I know that an agent will be happy to help!

  • Agent Team Statistics summary display - CUIC

    Hi,
    We are using ICM8.x and trying to get the data that will display in Cisco Supervisor Desktop as Agent Team Statistics summary display and display them as a report in CUIC tool. Can some give me an idea of how to achieve that in report Definition. Please post If any anybody already have report definition for that .

    In UCCE, you won't find all of those statistics available for reporting. From what I see on your screenshot:
    Logon Time - this is available in Agent Real Time reporting.
    Calls Presented/Handled - You can get Handled counts up to the previous half-hour interval using Agent Historical reports. A "Presented" total would be a combination of Answered, Abandon Ring, and RONA for the agent.
    Max Talking - This is not in any UCCE reports I've seen. Getting this data would require a custom report on the Termination_Call_Detail table, and would not be trivial to get.
    Average Talking - Average Inbound Talk Time is quite easy to calculate from HandledTalkTime and CallsHandled in Agent Historical reporting.
    Total Talking - There are a few different TalkTime fields in Agent Historical reporting.
    Max Ready - This would not be in any existing UCCE reports... the only way I can think of to get this data from CUIC reporting would be to enable Agent State Trace on agents and report on the Agent_State_Trace table. Not an easy report to build, and quite resource-heavy to enable Agent State Trace on many agents.
    Avg Ready - Like "Max Ready", not easy to get, and for the same reason.
    I don't know what other fields are on that summary screen, as I don't have a CSD install here to reference.
    The reason so many of these fields are not available is due to the data coming from different sources. CAD likely assembles all of that data for you, based on live data received from CTI Server. Meanwhile, CUIC gets all of its data from the AW/HDS databases. Perhaps UCCE 10.5 Live Data reporting will fill some of these gaps... I don't know.
    Why do you need to replicate this as a CUIC report?
    -Jameson

  • I just backed up my 3gs iphone using itunes.  All my photos and contacts have disappeared from my phone.  I am unable to locate them on my computer.  HELP!!!

    I just backed up my 3gs iphone using itunes.  All my photos and contacts have disappeared from my phone.  I am unable to locate them on my computer.  HELP!!!

    OK, I understand.  Try this ... it's much safer.  It will simply restore your backup, but not do anything to your iOS:
    While your iPhone is plugged in to iTunes, right click on the iPhone icon on the left side of the iTunes display.
    Choose "Restore from backup ..." from the pop-up menu that appears.
    Again, what this will do is place that backup back on your iPhone without changing iOS.  So you should be very confident in the backup contents before doing this.

  • Over half of my music disappeared from my music library after updating to itunes 10.7

    I use a Windows 7 operating system.  Since updating my iTunes to the latest version, 10.7, over half of my music has disappeared from my music library.  All 851 songs remain on my iPod, but my library shows only 187 songs after syncing my iPod with iTunes.  Also, while trying to sync my iPod to my iTunes, I'm constantly being asked to authorize my computer (it's already authorized) and an unknown email address displays in the account sign-in window to sign in when trying to sync my iPod.  I did not have these issues with iTunes before updating to the recent version. Any help is appreciated!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

Maybe you are looking for