Agent for RH5 x86_64?

Is there an agent that can be installed on Red Hat 5 EL x86_64? I downloaded the 64 bit 10.2.0.3 agent but attempting to push it from Grid Control results in an error message that the agent is only supported on RH3/RH4. Attempting to install driectly on RH5 using the runInstaller gets an UnsatisfiedLinkError looking for jre/1.4.2/lib/i386/libawt.so. Is there a trick I need to do to get the runInstaller to run on 64 bit? I didn't have any problem installing 64 bit CRS/ASM using the runInstaller as/is from those downloads.
thanks.

Do you not have metalink or did you try their suggestion/note?
Subject:      "Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
     Doc ID:      Note:443617.1      Type:      PROBLEM
     Last Revision Date:      28-NOV-2007      Status:      PUBLISHED
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle Server - Enterprise Edition - Version: 10.2.0.1.0 to 10.2.0.1.0
Oracle Server - Standard Edition - Version: 10.2.0.1.0 to 10.2.0.1.0
Linux x86-64
Linux x86
This article applies to Red Hat Enterprise Linux RHEL 5 ( x86 and x86_64)
This article applies to Oracle Enterprise Linux OEL 5 (x86 and x86_64)
Symptoms
While installing Oracle database 10.2.0 on RHEL 5 (Redhat Enterprise Linux) or OEL 5 (Oracle Enterprise Linux), you get the following error before Oracle Universal Installer (OUI) gets invoked.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall<time_stamp>/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall<time_stamp>/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Cause
The i386 version of the libXp package is missing. The Oracle Universal Installer ( OUI ) requires the file libXp.so.6 and this file is installed with the package libXp in RHEL 5 and OEL 5.
Issue the following to confirm the missing rpm:
% rpm -qa --queryformat "%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n" | grep libXp
Solution
The package libXp was not installed in RHEL 5/OEL 5 with default RPM packages, so it will need to be installed manually. In RHEL 4 this file was provided by the package xorg-x11-deprecated-libs which is installed with default package installation but this is not the case for RHEL5/OEL5 and is now provided with a different rpm, the libXp rpm.
Install the package libXp by the command:
# rpm -ivh </path/to/>libXp.<version>.i386.rpm

Similar Messages

SMD agents for Solaris X86_64

According to PAM Solaris X86_64 is released generally for WebAS 7.00 ABAP + Java (NW2004s SR1 to be exact).
However, there are no SMD agents available for that platform. Any idea why those will be published?
Regards,
Markus

Hi Dolores,
thanx - did that - and they told, that they "do not exist" (that's what I know already).
I'll update the thread as soon as I get some information.
Markus

How to use scheduled agent for query in database

Hi there I'm working with database on my app and when use the query for search in the database the application freeze for a maximum of one minute I want change that why I want what runs ok and I wonder if I can use a background agent for do that manage
the queries .
But I don't know how can I call the queries from the other project if the files are in the main project.

Hi OzkarLeo,
Background task provides functionality to do work when your app not in foreground, it need some conditions to trigger.
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/Hh977056(v=win.10).aspx. If you need scheduled query when app is active in foreground, then it’s no need to use background task.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

No log for am policy agent for iis6

Hello!
Im trying to get Policy Agent for IIS to run on my Win Srv 2003 with IIS6 and Sharepoint Services.
I am running the OpenSSO version of Access Manager.
I have installed the agent and done the initial cofiguration.
When i try to browse the resource i get a login prompt (IIS Basic Auth)and cannot login followed by "Not Authorized 401.3"
I should get redirected to the AM Login page, shouldn't I?
I tried to look for answers in the log file but the /debug/<id> directory i empty.
Anyone know what to do?
The amAgent.properties file:
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://login.lta.mil.se:8080/opensso/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://login.lta.mil.se:8080/opensso/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.sharepoint.lta.mil.se.80
# Set the logging level for the specified logging categories.
# The format of the values is
# <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
# 0 Disable logging from specified module*
# 1 Log error messages
# 2 Log warning and error messages
# 3 Log info, warning, and error messages
# 4 Log debug, info, warning, and error messages
# 5 Like level 4, but with even more debugging messages
# 128 log url access to log file on AM server.
# 256 log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level = 5
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = PN4rEZ1uhx1404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = C:/Sun/Access_Manager/Agents/2.2/iis6/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://sharepoint.lta.mil.se:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organiz ational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://sharepoint.lta.mil.se:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = sharepoint.lta.mil.se
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = true
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port = true
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAuthFilter

If the agent doesnot start properly you would always get redirected to com.sun.am.policy.agents.config.accessdenied.url , if thats not specified you will get a 403.
For the agent itself check that the naming.url is correct. the agent username and passwords are correct, and see that the user has priviledges to write to the agent log files. Apart from these post the windows event logs.

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
I have a customer having a world of issues getting the agent to start.
Jeff Courtade

No. 64bit support is not there for 2.1 agents on Windows.
-Subba

How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Grid Control Agent for Solaris 10 x86 32bit (not 64 bit)

Hi,
I am trying to locate the 32 bit version of Solaris 10 x86 agent for Grid Control OEM 11g (11.1.0.1.0).
There is only a X86 64 bit version listed at the download site.
My isainfo shows that solaris install is 32 bit.
Does anybody know if a 32 bit version of the agent for Grid Control 11g is available.

No ..Its not available yet.
Please contact Oracle Support.
Regards
Rajesh

OTN for Oracle 11g R2 for Linux x86_64 "See All" link does not work

I'm trying to view all of the downloads for LInux x86_64 Oracle 11g R2. When I select the link I get the following message:
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator
Can someone please investigate this issue.
Thanks

user457508 wrote:
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administratorThis is somewhat reminiscent of the problems we faced a few months back. While you are waiting for someone to investigate, you can also try:
- log out of OTN completely
- clear all cookies and cached files in your browser
- log back in again
- try again

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

Authorization issue with J2EE Policy Agent for AS7

Following the documentaion I have created a simple J2EE application with a servlet and 2 jsp's. The 2 JSP's customer.jsp and admin.jsp are mapped to /customer and /admin. The entire web application is subject to a filter like:
<filter>
<filter-name>Agent</filter-name>
<display-name>Agent</display-name>
<description>SunTM ONE Idenitity Server Policy Agent for SunTM ONE Application Server 7.0</description>
<filter-class>com.sun.amagent.as.filter.AgentFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>Agent</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
The two resources /customer and /admin are subjected security constraints like:
<security-constraint>
<web-resource-collection>
<web-resource-name>col2</web-resource-name>
<url-pattern>/customer</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>customer</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
The role-to-principal mapping is done in the sun-web.xml like:
<security-role-mapping>
<role-name>customer</role-name>
<group-name>customer</group-name>
<principal-name>amAdmin</principal-name>
</security-role-mapping>
<security-role-mapping>
<role-name>admin</role-name>
<group-name>admin</group-name>
<principal-name>amAdmin</principal-name>
</security-role-mapping>
Two roles 'customer' and admin are created via the identity server console and users are added to these roles.
The application deploys OK, when the app is accesed the user is redirected to the identity server and is authenticated fine. The user is directed to the main servlet and is allowed to access the the two jsp's. All is good till now, when the user access one these links say /customer, access is denied (403). The server logs prints out:
[21/May/2003:10:34:24] FINE ( 6036): servletPath = /customer
[21/May/2003:10:34:24] FINE ( 6036): pathInfo = null
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: Process request for '/idssample/customer'
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: Checking for SSO cookie
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: SSO cookie is not present
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Security checking request GET /idssample/customer
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: We have cached auth type PROGRAMMATIC for principal amAdmin
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Checking constraint 'SecurityConstraint[col2]' against GET /customer --> false
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Checking constraint 'SecurityConstraint[col2]' against GET /customer --> true
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Subject to constraint SecurityConstraint[col2]
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling checkUserData()
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: User data constraint has no restrictions
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling authenticate()
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: User authentication is not required
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling accessControl()
[21/May/2003:10:34:24] FINEST ( 6036): PRINCIPAL : amAdmin hasRole?: customer
[21/May/2003:10:34:24] FINEST ( 6036): PRINCIPAL TABLE: {}
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Failed accessControl() test
[21/May/2003:10:34:24] WARNING ( 6036): CORE3283: stderr: <May 21, 2003 10:34:24 AM CDT> <Agent> <Info> AgentRealm.getGroupNames(amAdmin)
[21/May/2003:10:34:24] WARNING ( 6036): CORE3283: stderr: <May 21, 2003 10:34:24 AM CDT> <Agent> <Info> AgentRealm.getGroupNames(amAdmin) => java.util.Vector$1@bb60ad
Now, snooping around I have found that the AgentRealm.getGroupNames(userdn) does
return the correct grops viz. customer,admin,anyone.
PLEASE HELP

-- Second Update --
After policy installation I got several problems with PeopleSoft configuration. Which finally were solved.
1. Some URL's has to be defined as not enforced.
com.sun.am.policy.amFilter.notenforcedList[1]=/ps/images/*
com.sun.am.policy.amFilter.notenforcedList[2]=*.css
com.sun.am.policy.amFilter.notenforcedList[3]=*.ico
2. In versions older than PeopleSoft 8.4.2 the policy agent modified the file
/opt/fs/webserv/peoplesoft/applications/peoplesoft/PORTAL/WEB-INF/psftdocs/ps/configuration.properties to add the properties:
byPassSignon=TRUE
defaultUserid="DEFAULT_USER"
defaultPWD="your password"
signon_page=amsignin.html
signonError_page=amsignin.html
logout_page=amsignin.html
expire_page=amsignin.html
However, in the newer versions of PeopleSoft this properties are controled from the online Peoplesoft console. Which are set on:
PeopleTools --> WebProfile ---> WebProfileConfiguration --> [PROFILE] --> Security --> In section "Public Users" the parameters that has to be changed are:
Allow Public Access (cheked)
User ID : DEFAULT_USER
Password : your password
HTTP Session Inactivity : (SSO TIMEOUT)
and:
PeopleTools --> WebProfile ---> WebProfileConfiguration --> [PROFILE] --> Look and Feel -->
In section "SignOn/Logout" set the following values:
Signon Page : amsignin.html
Signon Error Page : amerror.html
Logout Page : amsignout.html
Note: After making any changes on the console; restart PIA (weblogic instance).
With this the SSO with PeopleSoft is working Ok.
Message was edited by:
LpzYlnd

Creating/Testing and Using Agents for ODI Sequence

Hi
can you/anyone please tell/guide me how to Create a agent and use ODI sequence when i am doing File-to-File Mapping?
I created an ODI sequence and an agent too. but i am unable to use this sequence coz it gives error like Connection fail for agent.
and more over when I am testing my agent for connection my Application hangs and I have no choice but to close it forcefully and re-start.
I am giving host as my target server IP and Port as my target's port (Same as defined in DataServer' URL).
Please Advise/Help/Suggest.

Hi
can you/anyone please tell/guide me how to Create a agent and use ODI sequence when i am doing File-to-File Mapping?
I created an ODI sequence and an agent too. but i am unable to use this sequence coz it gives error like Connection fail for agent.
and more over when I am testing my agent for connection my Application hangs and I have no choice but to close it forcefully and re-start.
I am giving host as my target server IP and Port as my target's port (Same as defined in DataServer' URL).
Please Advise/Help/Suggest.

POP Forwarding Agent for Groupwise 7

Is there a POP Forwarding Agent for Groupwise 7

Dave Parkes wrote:
> http://www.imailds.com/Frames/Master/Products.htm
>
> is probably your best bet. The old PFA agent is still available from
> CoolSolutions, but hasn't been touched in a while.
>
> Also, probably best asked in the GW7 gateways forum by the way <g>
>
> Cheers Dave
>
Hi Dave,
Youre a lifesaver...
Thank you for your suggestion.
I checked out the link you recommended... www.imailds.com .
And it looks like its going to be a solution to my ISP Dynamic IP problem.
I'm a big Netware/GroupWise enthusiast, trying to offer people relevant
networking alternatives using Novell.
Thanks for the Help.
Ill let you know how I make out.
[email protected]
>

Policy Agent for Domino 6.5.1

I am trying to find out if the 2.2 Policy Agent for Domino (6.5.4) is supported for Domino 6.5.1.
Thanks in advance,
Eric

http://www.sun.com/download/index.jsp?cat=Identity%20Management&tab=3&subcat=Policy%20Agents describes what PA are supported.
I know from my past experience that PA 2.1 works with AM 7.1 in Legacy mode but it is not supported.
If your application server or web container is not supported then you can always use PA 2.2 for Sun Java Web Proxy Server 4.0. In this case, you will to place SJWPS in front of your application and your application will be accessed via proxy server.
Vivek

Is there a SCOM install agent for SLES on PPC64?

Is there a SCOM install agent for SLES on PPC64?
Trying to install an agent for SCOM on Suse VM units that are hosted on IBM's power 7 hardware.
While i do see .ppc AIX agent installers I do not see one for SLES on ppc64.
Has anyone installed SCOM on SLES ppc64 or know of a viable agent for the install?

To elaborate a bit, Microsoft definitely does not offer an agent for SLES on PowerPC.  Linux has been ported to a lot of different processor chip architectures, which is great. But Intel x86/x64 is by far the most popular, and it's the only
chip architecture for which Microsoft supplies an agent for monitoring Linux. As you noted, there is an agent for AIX on PowerPC, but AIX is a very different operating system from Linux, and the agent for AIX on PPC will not work on Linux on PowerPC.
I don't see Microsoft doing an agent for Linux on PowerPC. We would need to see a significant business opportunity for that to change.
I would note that the source code for the OpsMgr agent for Linux/UNIX is available at
http://scx.codeplex.com, along with instructions on how to compile and build the agent. Someone with developer skills in C++, compilers, makefiles, etc. could definitely build an agent for SLES on PowerPC.  For
example, I'm aware of someone who has built an agent for Linux running on the IBM S/390 (z-Series) chip architecture running as a guest under zOS and has it working with SC 2012 OpsMgr.   But you would be on your own,
perhaps with help from the community, to make that happen.
Michael Kelley, Lead Program Manager, Open Source Technology Center

Remote Agent for ACS for Windows 2008 R2 64-bit

Hi,
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
I see following urls says it does not support Windows 2008 R2 and also 64-bit Windows,
https://supportforums.cisco.com/message/3135061#3135061
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However following url says its support 2008 R2 with 64-bit version
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html
Appreciate if someone can adivse us what vesion (file name) of Remote Agent can support (or working) for Windows 2008 R2 64-bit.
thanks in advance

Hi Tarik,
What I wanted to say that the below url says that ACS 4.2 does not support on 64-bit OS:
ACS Requirements
You must use ACS Remote Agent for Windows, version 4.2, with ACS SE, version 4.2. We do not support other Cisco Secure ACS releases.
Note ACS Remote Agent 4.2 for Windows does not support 64-bit operating systems.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However could you please let me know what exact Remote Agent file you recommend to use for windwos 2008 R2 64-bit Server. The ACS SE version that I have is 4.2.0.124.
Thanks

Agent for RH5 x86_64?

Similar Messages

Maybe you are looking for