Aggregation issue Bex report

Hi all,
I am facing the following aggregation issue at reporing level. BW system 3.5
Cube1
Material, Company code, Cost center, Material, Month,   Volume KF
Cube2
Material, Company code, Cost center, Material, Month,   Price KF
Multi provider
Material, Company code, Cost center, Material, Month,   Volume KF, Price KF
Report
- Global Calculated key figure 'Value' is based on basic KF's Volume KF, Price KF
- Time of aggregation is set to " Before aggregation" in propery of Calculated Key Figure.
- There is only one characteristics 'Company code' is used in report.
When, I execute this report, Calculated KF is not working (No values), If I change Time of aggregation " After aggregation" in propery of Calculated Key Figure, then It works but wrong values.Price gets aggregated(add ups) and multiply with Volume which is wrong.
Can you please give me a Ideal solution to resolve this.
Thanks,
Harry

Hi all,
Can I assume that there is no solution for this issue ??
Thanks,
Harry

Similar Messages

Aggregation issue for report with bw structure

Hi,
I am facing aggregation issue while grouping reports in webi.
We have a BW query with 16 values, which we bring to bw as structure. Out of 16, 8 are percentage values (agg. type should be average).
If we bring the data at site level, data is comming properly. But if we use same query and try sum/grouping( on region level), then percentage is getting added.
Since it's a dashboard report with lots of filters, we cannot go for seperate query at each level(site, region, zone).
How we can resolve this.. please give me suggestion.
Regards
Baby

Hi,
Since we were using structure, it was not possible to produce the required result in BO.
We change structure to keyfigures and bring all of them in to BO. All the column formulas are now in BO side.
Now it is working fine.
Regards
Baby
Edited by: Baby on May 10, 2010 11:39 AM

DATA AGGREGATION ISSUE IN REPORT

Hi,
when we were running query by selcting the the version . the data is aggregation dono where it went rong
Explanation :
we alredy loaded data with version for the year 2010.. we started laoding from April 2010 to March 2011.. as 12 fiscal periods, with 53 versiions. here version means week(1to53 weeks for year ) but we started laoding from April means 14th week of year 2010. to March 2011. til here no probelm with data every thing is matching in the report/
now the turn comes for laoding data from April 2011..Again 14 version came which is alredy in system for April 2010
now what is happening ..
when we laod data for 14 week of 2011 (April). data is Aggregating or some mixxing up with data..
so what we had done is we had added calyear in the filter so that user can see only the data for version with respective year.
even though data is Aggregation with previous year(2010) for the same version alredy in system ..
nothing is working outt..
can u pls sugest us , any probelm in the back end , need to do any changes for modelling ..
till now what we had done is deleating the data from cube and dso for April2010 for 14 version and laoding data for April 20110 with version 14 . which is toatlay new version in system.
So this Keep on continuying every time..when data not matching.
now for the Month May with version 20 we have to laod the same probelm should not repeat .
pls help with your valuable sugestion detailly.
And this forecast summary report , we have data for next 2 years. planning is doing for every 2 years from currentt date
Any queries pls let me know
Edited by: afzal baig on May 11, 2011 4:00 PM

Hi
is your data stored in a cube or DSO? If it is DSO - is version and period / calmonth a key field?
what type of key figure are you using and what is the aggregation rule for this key figure - in the infoobject definition and in the query definition?
is there anything unusual in the definition of your version characteristic? any compounding?
Why did you not use 0calweek?
regards
Cornelia

Strange performance issue in bex report

Hello Experts,
I have a performance issue on my bex report.
I'm running the report with below selection criteria and getting 'too much data' error.
Country : equals EMEA
Category: not equlas 13
Date : 02/2010 to 12/2010.
But when I ran the report for smaller date ranges the number of records are not exceeding 13000.
02.2010 - 06.2010 - 6,555 rows
07.2010 - 09.2010 - 3,671 rows
10.2010 - 12.2010 - 2,780 rows
I know excel can't fit more than 65000 records, but I'm expecting 13000 records for my wide date range which excel can easily fit.
Any ideas on this one will be appreciated.
Regards,
Brahma Reddy

Hi,
For Question 1:
In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
For Question 2:
There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
Hope this helps.
Regards,
Rk.

BEx report : Time diff HH:MM average Issue

Hello Guys
below is my Issue with BEx report.
I have a table with has d1 and d2 and t1 and t2.
I want the diff between them in only HH:MM, using any of the function modules.
I have got the HH:HH value into my DSO.
Then I converted the HH:HH into HH:MM in the BEx.
Now my report requirement.
I want to display the report with yearly , monthly and daily information -
let say my boss wants to compare Average time ( HH:MM) between June and July of 2007.
the report should be
year ++++++++ month ++++++ daily ++++++++ rec#++++++++ diff
2007++++++++ June++++++++ 01++++++++ 123++++++++ 31.36
2007++++++++ June++++++++ 01++++++++ 124++++++++ 11.23
2007++++++++ June ++++++++ 03 ++++++++ 152 ++++++++ 18.21
2007++++++++ July ++++++++ 01++++++++ 157 ++++++++ 12.27
2007++++++++ July++++++++ 08 ++++++++ 124 ++++++++ 15.33
now when you look at the above report layout.....what i want is to display the average time ( diff) for month of june and july.
so the average time diff of the month of june will be ( total time / record count ). same for july.
so the result should be for
JUNE - (32.36 + 11.23 + 18.21) / 3
JULY - (12.27+15.33) / 2
also it should convert the decimals (MM) into hours after 60.
I am getting the sub total for month June as ((32.36 + 11.23 + 18.21) / 3).
Its not converting the MM in HH even after 60 Min. say for example its showning 40:67. but the correct value should be 41:07
hope you got my issue.could you please suggest the solution as to how can i get the correct value under the month sub- total.
thanks,
pratap.

Hello venku chittidi ,
Thanks for the reply.
But the User wants to display the values in HH:MM instead of MM.
would it be possible to calcuate HH:MM from HH:HH in the transformation.
thanks
pratap.

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

BEx Report Display - Transformation Rule Issue - Urgent

I have 2 fields one Key Figure : "Amount (Datatype-CURR / length-13)" and one Characteristics : "Indicator (Datatype-CHAR / length-1)" in the source system.
I need to display the Amount field with +/- depending on the Indicator field which has only 2 values S(Credit) and H(Debit) in the BEx Report.
How can I handle this issue. Please provide your suggestions.
Thanks,
Shekar

Create 2 Key Figures.
One restricted with S(Credit) and another restricted with H(Debit).
Create another canculated Key Figure and multiply with -1 for the u want to do.
Then add the 2 filed if you want to and display and keep the others in No Display.
Regards, Siva

Bex Report issue - transaction data of type Char not dispalyed complete

Hi BI Expers ,
I have one issue related to Bex reports here
I have complete data loaded in DSO , there is one field Job Title which is having a length of 60 char . When I am executing the report in Bex Analyzer , the value for Job Title is getting truncated after 30 characters . Although full 60 chararacters are loaded in DSO still I am not able to present them in reports .
Can some one help here , whether this is Analyzer limitation or is there some setting to fix this issue .
Regards
Anurag

Hi Anurag,
Check the Output length of the object that is giving out put as 30 charecters.
And check in Business Explorer tab option for BEx Description short, medium or High.
Hope this helps.
Veerendra.

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

BEx report issue on setting offset value

Friends,
I have got a Bex reporting requirement as follows.
Given a Calendar week I have to show data for 5 Key figures for the next 3 calendar weeks. For ex: if I enter 05/2006 I have to show data for 05/2006, 06/2006 and 07/2006.
I thoght of using the Off Set parameter for all the Key figures, and for testing I did for 2nd set of Key figures with off set (1)..but these key figures are not showing any data.. Is it I am missing anything here ??
Please comment if you have any better thoght of doing this..
Thanks
Mavi

Hi,
The format of period you gave refers to month i believe. If it is right, check the offsets once again. If the user enters fiscal year period, it should be converted in to week period using an customer exit variable(if you don,t have 0CALWEEK) and set offsets.
Check this link, you may get some idea from that.
Re: Aging Report

Issue with Variable Personalisation in Bex Report

Hi Gurus,
I'm facing a typical problem with Variable presonalisation in the Report.
I've executed a BEX Report and filtered data on some characteristics and used SAVE AS Button on the Portal to save the resultset. When I'm trying to use the variants, again say after 2 or 3 days i couldn't find updated data for particular variants upon using the same variants rather its refelecting the old data. Further more when I execute the report and try filtering on the same criteria altogether, I'm able to see updated result set.
Is there any setting to be enabled when we personalise variants or variants are dependent on the data or the date on which they are created. Not sure why the reports are behaving this way. Or Do I need to create variants time and again.
Any pointers would be of great help.
Regard,
Yaseen

Hello,
In the BEx report, when you get the variable selection screen there input your selection and at the bottom you have the option of saving them as a variant.
Now in future when you run the report simply use this variant and execute the report. It should work fine.
Also remember date selection can be tricky. If you input todays date in the variant, it wil consider the same date in further references. So do a check on that too.
Regards,
Shashank

Bex Report Designer - Large amount of data issue

Hi Experts,
I am trying to execute (on Portal) report made in BEx Report Designer, with about 30 000 pages, and the only thing I am getting is a blank page. Everything works fine at about 3000 pages. Do I need to set something to allow processing such large amount of data?
Regards
Vladimir

Hi Sauro,
I have not seen this behavior, but it has been a while since I tried to send an input schedule that large. I think the last time was on a BPC NW 7.0 SP06 system and it worked OK. If you are on a recent support package, then you should search for relevant notes (none come to mind for me, but searching yourself is always a good idea) and if you don't find one then you should open a support message with SAP, with very specific instructions for recreating the problem from a clean input-schedule.
Good luck,
Ethan

Bex reporting issue

Hi gurus
I m facing a typical error in Bex Reporting. This report displays the details of consumer address details. The data is successfully browsed from data tgt browser in ODS.while creating the reporting and query it gives me these 3 errors.
Note: Z_CRDAT is key fig of date type / ZADD_ODS is the ODS .
1. Error in SQL Statement: SAPSQL_FIELDLIST_SUM_TYPE /BIC/Z_CRDAT
2. System error in program SAPLRSDRC and form RSDRC / FORM DATA_GET_ODS
    Message no. BRAIN299
Diagnosis
This internal error is a targeted termination since the program has an incorrect status.
Procedure
Analyse the situation and inform SAP.
3. System error: RSDRC / FORM DATA_GET_ODS ERROR IN RSDRO_READ_ODS_DATA ZADD_ODS 99
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data
Manager:
Parameter 1 = &v1&
Parameter 2 = &v2&
Parameter 3 = &v3&
Parameter 4 = &v4&

hi gurus
can any body suggest me anything against this error .
gaurav

BEx Reporting Format Issue

Hi,
I need to create a HR-BW BEx report in the following format.
For each employee number, i need to display following 3 rows of information:
For example, for employee number: Emp1, following 3 rowd should be present.
01 Year Of Experience
02 Years of service
03 Years in Entitlement for annual holidays
I am having required data is available in the InfoProvider from the source system. Can you please help me, how can i create the BEx report in the above specified format?
Thanks!
Best regards,
Venkata.

Venkata,
It is very easy to create such report.
1. Open the BEx Query Designer
2. IF you are using 7.0 you will see tabs with Filter and Rows/Colum
3. Goto Rows/ Column
4.You must be using KEy Figures for Years of Exp, Years of Service
drag those in the rows
5. SAve the query and execute it using the BEx Analyzer. Open Query.
Ask some ones help for the Name spacing standards you follow in your organization
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30db8c61-25d3-2b10-2998-a5937f7b783d
Hope this helps.

Issue in Report output

Issue in Report output
I am facing strange issue. I have created a BEx query and Executed in Bex analyser. In this output I can able to see * mark as values instead of KF.
Anyone can help me in this.

hi,
can you use NODIM functionality and see .
Ravi

Aggregation issue Bex report

Similar Messages

Maybe you are looking for