Agilent 53131A LabWindows/CVI device driver showing timeout error

Hi All,
I have developed TestStand sequences for Measurements using Agilent 53131A frequency counter instrument. I have developed 2 sequences one using CVI drivers and the other using LabVIEW drivers. The functionality of the sequence is as follows
1. Initialize the instrument
2. Measure the frequency for N number of times
3. Close the instrument
What I could find is the LabVIEW driver based sequence is working fine (for any number of measurements) but the CVI driver based sequence is showing Timeout errors after 1or 2 measurements.
Thsi is the driver page http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=1003
Can anyone help me to find the root cause of this issue?
Thanks in advance...
Into the pursuit...
Maverick

Were you using the VXI Plug and Play or IVI driver?

Similar Messages

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

CVI device driver DLL

Hello,
I tried to use CVI device drivers under LabVIEW 6i. The problem ist
that the device driver DLLs are missing. Is it possible to create
these DLLs without LabWindows, or create them with LabVIEW? I tried to
create them with a gnu compiler, there some c-source- and
c-header-files are missing. I need the DLLs for the device drivers
bp14xx, hp3325a an 3457a. Can anyone tell me how to get these DLLs?
Best regards
Jens

The CVI drivers for the HP3325 and HP3457 are very old it appears and were propabley created before plug and play and the need for DLL distribution. The only way to create the DLL required is with LabWindows and even then might take some effort to work. However, LabVIEW drivers do exist for the HP3325 and HP3457. Go here, select Agilent as the manufacturer and download them. I don't know about your BP14xx. Who is the manufacturer and what is the exact model number.

SOLVED - iPhone Bricked by Update Device Driver Not Installed Error 1602

iPhone 4 / Windows 7 x64 / iTunes 9.2.1.5
My iPhone normally interfaces with iTunes on my PC via USB cable without issues.
iTunes prompts to update the iPhone when a new version of iOS is released. Each time, the update has failed as described here: http://support.apple.com/kb/ts1275.
The update process stops, the "Connect to iTunes" screen is all that displays on the phone, and an utterly informative alert message comes up in iTunes along the lines of "Error 1602 (or 1604), The iPhone could not be restored. An unknown error occurred." Along with this, the iPhone ceases to be recognized as a USB device by Windows 7, with a little notification tray pop-up informing me that "Device Driver Software was not successfully installed". The iPhone no longer shows up as a device in iTunes.
The generic troubleshooting steps listed at http://support.apple.com/kb/ts1275 (changing USB ports, changing USB cables, restarting the computer, uninstalling and reinstalling all Apple software, etc., etc.) were a useless waste of time, but following the links for USB troubleshooting led to this page: http://support.apple.com/kb/TS1538
As instructed there, I located the Apple Mobile Device USB Driver in Device Manager. It appeared listed as "Apple Recovery (iBoot) USB driver" with a yellow exclamation point; thus I attempted to reinstall the Apple Mobile Device driver. First I uninstalled the existing driver, then scanned for hardware changes, then tried to update the driver as described. However, the path where the driver files were supposed to be (C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Driver) did not exist; the Driver folder was missing.
After Googling a little I came across http://discussions.apple.com/thread.jspa?threadID=1949672 and http://discussions.info.apple.com/thread.jspa?messageID=10806341. Following the instructions there, I was able to pull the device drivers (usbaapl64.sys, usbaapl64.cat, usbaapl64.inf and usbaplrc.dll) out of the iTunes installation program (from AppleMobileDeviceSupport64.msi, using WinRAR / Universal Extractor), put them in the previously nonexistent Driver folder and make Windows use the drivers.
Happily, this manual driver reinstall allowed Windows / iTunes to recognize the iPhone and proceed with the update / restore process. I had to repeat the driver reinstall process a couple of times during the iPhone restore - as it progressed, it kept switching the driver back to something nonfunctional - but the restore eventually went through, allowing me to keep my apps, data, history, etc. At least, until the next iOS update.

Hi liam3w,
Please try to reset BIOS, if problem remains, please kindly contact local lenovo for hardware inspection.
Please enter BIOS be pressing F1 in "ThinkPad Screen", F9, then F10.
Fred
T61 + X201i

DVD drive showing -70017 error

When I put a DVD into the drive it comes up with that error and won't let to disc play, my Internet is also not allowing me to scroll down the page and the battery life depletes quickly

Intel-based Macs: Resetting the System Management Controller (SMC)

Yokogawa UT driver for LabWindows/CVI 6.0 won't translate to LabVIEW 8.6?

The device driver for the Yokogawa UT series furnace controllers is in LabWindows/CVI 6.0 and I would like to use it in LabVIEW. I tried to use the utility to convert from LabWindows/CVI to LabVIEW, but it said it couldn't and that the device driver is from before LabWindows/CVI 5.01.
In any case, here is the series of events.
I downloaded the LabWindows/CVI to LabVIEW Converter, from
the page on LabVIEW's developer's connection that had the driver for the
Yokogawa UT controller.
From an empty LabVIEW Block Diagram, I click
Tools>>Instrumentation>>Create LabVIEW Interface to LabWindows/CVI
Instrument Driver...
This takes a little while to load. During loading an
FC_Interface_Main.vi runs, apparently trying to find a file.
Once that is done, the two options are Basic and Advanced. I leave
basic selected. I click next. browse to find the ykut.fp file from the
driver I downloaded.
I then click next. The error window that is seen in the screen shot is
then shown.
I called a tech support guy at NI about this, and I e-mailed him with all the above, but there was no reply, though the conversion utility is no longer available on the same web page as this specific device driver.
In any case, if anybody could give a little guidance, it would be appreciated.

Hello Screamingzebras,
I converted the .fp file to be version 5.5 and ran the utility that was mentioned. I have attached two files to this post. "ykut.zip" is the converted .fp file (version 5.5). "yut.zip" is the converted instrument driver.
Regards,
Jon S.
National Instruments
LabVIEW R&D
Attachments:
yut.zip ‏174 KB
ykut.zip ‏25 KB

Importing Instruments Driver from LabWindows/CVI

Does anybody have got wintools_32.dll library ?
I need it to convert LabWindowc/CVI Wintools Instrument Driver to Labview.
Could you send it to me?
Romek.
[email protected]

Hi!
Thanks for your answer.
Exactly, I've tried to import LabWindows/CVI instrument driver to Labview.
This Instrument driver I've found here:
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3F04956A4E034080020E74861&p_node=DZ52176&p_submitted=N&p_rank=&p_answer=&p_source=External
During import procedure i was asked about wintools_32.dll library.
Personally I am interested in System Tray icons functionality of this driver.
I'm not sure that wintools_32.dll is Labwindows/CVI library, but i've searched Microsoft Windows pages with no results.
Regards.
Romek.

ATI high definition audio device driver

Same problem as aldwellangel (04-30-2014): failed attempt to install device driver. The error message was preceded by a message box entitled "Installing device driver software" which said it was "Searching preconfigured driver folders ...". Problem started some months ago for no apparent reason, but its only effect seems to be to delay startup. At the same time a similar problem occurred with "IDT High Definition Audio Codec"; this was solved by installing the driver from the hp site.
I downloaded and installed the 64 bit driver in accordance with the posted Solution, but that made no difference. I then downloaded the 32 bit driver. It would not install, the installation program reported "No driver was supported in this driver package".
I am running an hp Pavilion dv7 with Win7 up to date.

Hey hgfr,
Try updating the chipset drivers. You can find these here: Intel Chipset Installation Utility and Driver.
Also, try reinstalling the GPU which controls the HDMI audio: AMD High-Definition Graphics Driver
If the pop-up is more of an annoyance it is possible to disable the popup from showing, but it's still going to search for new drivers each time you boot and will also hide other new hardware from showing up when connected. To do this:
Press Windows Key + R.
Type gpedit.msc and click OK.
Expand the Computer Configuration section on the left.
Expand the Administrative Templates section.
Expand the System section.
Click on Device Installation.
On the right you should see a list of settings. Double click on Turn off "Found New Hardware" balloons during device installation.
Click Enabled in the upper left area. (Yes, enabled. Not disabled. You are enabling the turn off feature.)
Click OK.
Close the Group Policy Editor.
Let me know if updating the chipset or GPU helps or if disabling the popup is OK.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Double bar graph in Labwindow/CVI?

double bar graph in Labwindow/CVI? like showed in attachment .
Attachments:
index.jpg ‏4 KB

Hello ashwinich9, please do not open more and more threads, follow the discussion in the original thread where I have posted a reply.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

P35 Neo2fr sata2 hard drive shows as MW-DMA2

Just noticed that my Samsung HD501LJ hard drive is showing up as "Multi-word DMA Mode 2" on ATA Channel 0 in windows 7. Is this right ? as it sounds a bit wrong to be in multi-word DMA mode to me. I'm sure it should show up as "Ultra DMA Mode ??" like my DVD Writer does.
I noticed this after seeing that windows would do little pauses/freezes when reading/writting large files to HD.

Quote from: RemusM on 04-January-11, 02:02:04
It means downgraded speed due to a bunch of CRC errors.
Change the SATA cable of this HDD and try again.
I know why that is, it's the same bug from WindowsXP which would stop CD/DVD drives from working at full speed after lots of failed read's from CD/DVD's, but thanks
I tried 3 different cables, and the SMART reading of the drive shows NO errors. Also tried this drive in my daughters PC (although windows was loaded on a different drive) and copied over 100 gig on and off the drive just fine.
Also have a WD Sata drive connected that shows the SAME multiword-DMA 2 but don't use that drive a lot so didn't notice any problems with it.

Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW

Hello All,
Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW
http://zone.ni.com/devzone/conceptd.nsf/webmain/9A93316BEBEDB17786256FA300675A0A
But I can not find any hyperlinkt to download
"LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers"
Is there any evaluation version for downloading?
Thanks,
nonomiya

So strange,
I go through three pages but does not find any entry for download,
hmm...,
1. After press the hyperlink,
See Also:
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
2. and for a resuest info. form.
3. press download..
====
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
System Requirements
NI LabVIEW 7.1 or later
Windows 2000/NT/XP
Use the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers to create LabVIEW VIs for VXIplug&play and IVI-C instrument drivers from function panel (.fp) files.
Instrument Driver Network
Before using the conversion utility to create a new instrument driver wrapper, please visit ni.com/idnet to see if a LabVIEW Plug and Play instrument driver is available for your device. The Instrument Driver Network (IDNET) provides support for more than 3,000 different instrument models from over 170 different instrument vendors.
Recommendations
This utility was created for developers of C-based instrument drivers who wish to provide a LabVIEW interface, but do not develop a LabVIEW Plug and Play driver. By developing the C and LabVIEW interfaces together, it keeps the components synchronized, and eliminates the need for customers to create their own LabVIEW interfaces. Vendors should distribute the LabVIEW wrapper files with the associated VXIplug&play or IVI instrument driver, so that end users do not have to visit multiple web sites to download the complete driver.
If you are not an instrument vendor, we recommend that you use this utility only if you have instrument driver expertise. Access to the instrument driver source code is preferred, in case you need to edit the C instrument driver in LabWindows/CVI.
After generation, the wrapper VIs should be tested with the instrument.
Instructions
Once you install the software, simply access the utility from the Tools>>Instrumentation>>Import CVI Instrument Driver...menu in LabVIEW. This software replaces the built-in tool and provides feature enhancements.
For additional information on this utility, view the resources below.
Readme for the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
Submit your Driver
Visit the Instrument Driver Network
nonomiya

Agilent 53131A VISA Driver ?

Hello !
I´m looking for a driver to Agilent 53131A...
The current driver for download don´t have/use
VISA (current driver is CERTIFIED by NI but VISA is not
implemented, strange ?) !
Software: Labview 7, Teststand 3
I don´t like re-work...
Thanks in advance
Niklas Lithander
NOTE Norrtelje AB

Let's try again...
Try these steps:
1. Follow the link in my previous post.
2. Download the "CVI" version.
3. Extract the zipped contents into a temporary directory.
4. Start LabView.
5. Open a blank vi.
6. Under TOOLS => Instrumentation => select "Import CVI instrument driver"
7. Select "HP5313XA.FP" from your temp directory.
8. It should select all already, so simply click on "OK".
9. Let it convert.
10. Go back to the "new" block diagram in LV.
11. OPEN a file called "HP5313XA.llb". It is located in the instrument library inside your LabVIEW directory.
12. Select the vi you want (ex: initialize.vi)
13. It will be in VISA.
14 )
-enjoy-
JLV

NI MAX entry for a Non-NI/VISA Instrument LabWindows/CVI Driver

Hi All,
Sorry in advance if this is not the right forum.
I have created a IVI class and specific instrument driver in LabWindows/CVI for a Video Generator. The generator is a networked, SCPI based instrument. It does not automatically appear in MAX like other NI based instruments.
How or what do I need to do to MAX to use the instrument? Is it as simple as adding the logical name, driver session and advanced driver entries to MAX? Do I need to create a new instrument in the HW section such that the driver session has a device to point to? I have been playing aroud with the networked instrument section in MAX and nothing seemed to make sense to me.
Any help would be greatly appreciated!
Thanks
Minesh
Solved!
Go to Solution.

Minesh,
Maybe this Knowledge Base article will help get you started. I think you will need to add a new VISA TCP/IP Resource in Measurement and Automation Explorer.
How Do I Configure an Instrument to Communicate via TCP/IP in Measurement & Automation Explorer:
http://digital.ni.com/public.nsf/allkb/D7D8E3E1B682022286256D4A00771A52
Robert B
Applications Engineer
National Instruments

Error: LabWindow CVI driver for Lab View 2011 (using hp4145a)

What is the DLL for the Agilent hp4145a instrument driver?
I am trying to convert the LabWindows/CVI Agilent hp4145 intrument driver for use in labview 2011, but keep getting errors related to an incorrect DLL.

Hi Courtney L.,
Your prompt response is much appreciated. Thank you.
I have attached the "hp4145 LabVIEW Wrapper Conversion Report" as a txt file
- this report was automatically downloaded along with the"LabVIEW Instrument Driver Import Wizard (LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers)" *(link listed below), and popped up at the end of the installation.
If any specific details or a screenshot will also be of benefit to solving this problem, I will be able to post them by tomorrow night.
*Link for Instrument Driver setup download:
https://lumen.ni.com/nicif/us/infolvinstdriver/content.xhtml
Attachments:
LabVIEW_Wrapper_Conversion_Report.txt ‏6 KB

Install LabVIEW, LabWindow, TestStand and Device Driver

I need to install LabVIEW (on DVD with Device Driver), LabWindow, TestStand, and Device Driver.
What's the best order? TestStand, LabWindow, LabVIEW w/ Device Driver?
Do I need to reboot 3 times? or once after all installed?
George
George Zou
http://webspace.webring.com/people/og/gtoolbox

The way I did it last (LV8.5.1, TS 4.0) was in this order. LabVIEW, LabWindows/CVI, Signal Express, Toolkits, Device Drivers, than finally TestStand. I know you want to do TestStand last. It worked great for me.
Using LabVIEW 2010SP1 and TestStand 4.5

Agilent 53131A LabWindows/CVI device driver showing timeout error

Similar Messages

Maybe you are looking for