AIA Instal failing on Cluster AIAReadJMSNotificationProcess not found

Hi,
I am installing AIA on SOA 11.1.1.5 during installation I am running into below error. I am trying to install AIA on a cluster environment on HP-UX box. Need help in resolving the below I see the below in the log.
Here is the command that I ran to begin the installation
ant -f AIAInstallDriver.xml -DPropertiesFile=$AIA_HOME/aia_instances/AIA_01/config/AIAInstallProperties.xml -logfile $AIA_HOME/aia_instances/AIA_01/logs/FPInstall.log -DDeploymentPlan=$AIA_HOME/aia_instances/AIA_01/config/FPInstallDP.xmlAnd here is error am getting after 28+ minutes of installation progress.
     [wlst] Activation completed
     [wlst] Disconnected from weblogic server: AdminServer
     [wlst] <Jul 25, 2012 4:33:29 PM CDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
     [echo] executing Endpoint Configurator over the dir : <AIA_HOME>/Infrastructure/ErrorHandling/src/AIAErrorTaskAdministrationApp/AIAErrorTaskAdministrationProcess
     [echo] Fixing AIAErrorTaskAdministrationProcess endpoints per Oracle Support DOC 1369101.1
BUILD FAILED
<AIA_HOME>/Infrastructure/Install/AID/AIAExecuteDriver.xml:117: The following error occurred while executing this line:
<AIA_HOME>/Infrastructure/Install/AID/AIAExecuteDriver.xml:64: The following error occurred while executing this line:
<AIA_HOME>/aia_instances/AIA_01/tmp/AIDExecuteDP_temp_1892431361.xml:15: The following error occurred while executing this line:
<AIA_HOME>/Infrastructure/Install/AID/lib/AIDDeploymentLibraryTasks.xml:160: The following error occurred while executing this line:
<AIA_HOME>/Infrastructure/Install/AID/lib/AIDConfigurationLibraryTasks.xml:703: <AIA_HOME>/Infrastructure/ErrorHandling/src/AIAErrorTaskAdministrationApp/AIAErrorTaskAdministrationProcess/Infrastructure/ErrorHandling/src/AIAReadJMSNotificationProcessApp/AIAReadJMSNotificationProcess not found.
Total time: 29 minutes 5 secondsFrom the logs above it's complaining about AIAReadJMSNotificationProcess not found but shouldn't the installer have took care of it.
When I go to the Enterprise Manager I don't see any AIA related composites being deployed I do see AIA Application deployed. But the installation is failing. Any idea on what might be wrong and how to correct it and start the installation from where it ended.
Any help is appreciated.
Thanks

With those informations alone it is hard to tell whats happening.
Even if you perform a "boot -x" I would expect that your public network is getting configured, since on your described setup you should have a /etc/hostname.qfe0 and /etc/hostname.qfe4 in order to setup the IPMP group and possible test addresses. So ifconfig should show something for at least those interfaces. Since you are not even seeing lo0, I would expect several error messages on the console.
Since no obvious reasons springs to my mind as of why you do not see this, I suggest to open a service call with Sun (if you have a support contract that is) in order to get the system(s) better analyzed. A lot more informations are necessary to understand the problem. Anything within /var/adm/messages (even the older ones) that might give a hint? Any administrative changes lately?
Greets
Thorsten

Similar Messages

Stand alone APEX listener install fails with timezone region not found

Hi,
I have searched the forum but found only a thread for the installation with Goldfish.
I am very new to all this so I apologise if my problem is too simple, but please help as I am very frustrated with it.
I have a 10.2.0.4 database on Windows XP for testing with.
I installed APEX into it successfully, then down loaded the listener.
I have to Java installations, one under my Oracle Home, the other under Middleware where I have JDeveloper installed.
If I try $ORACLE_HOME/jdk/bin/java -jar apex.war it throws a Unsupported class version so I tried with the Middleware jdk and it appeared to install.
I then went to http://localhost:8080/apex/listenerConfigure and entered the password for APEX_PUBLIC_USER and the info for a basic connection, it fails with the following message
Request could not be processed due to error:
Sat Apr 30 00:06:30 CAT 2011
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
Please if anyone can help me through asap this I would be most grateful

Yay, I found the solution:
I started by running:
begin
for v_rec in (select tzname,tz_offset(tzname) v_offset from v$timezone_names
where tzabbrev='CAT') loop
dbms_output.put_line('tzname '||v_rec.tzname||', offset '|| v_rec.v_offset);
end loop;
end;
SQL> /
tzname Africa/Khartoum, offset +03:00
tzname Africa/Windhoek, offset +01:00
tzname America/Anchorage, offset -08:00
tzname US/Alaska, offset -08:00
PL/SQL procedure successfully completed.
I then added -Duser.timezone="+01:00" before the apex.war ie
java –jar -Duser.timezone="+01:00" apex.war

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

ISE upgrade failing with "% Manifest file not found in the bundle"

Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version      : 1.0.3.377
Build Date   : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
Saro

Same problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version      : 1.1.1.268
Build Date   : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version      : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version      : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version      : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version      : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

X2go : "Connection failed sh: 1: x2golistsessions: not found"

i am trying to connect to a school computer via x2go. I can connect via ssh to the server and start x programs via x-forwarding and such. However i cannot connect via x2go in any way. I do not have admin permissions on the school computer but i can start a gnome session with the command "gnome-session".
However when i start x2goclient and try to connect using in my opinion the same settings i get this error
Connection failed sh: 1: x2golistsessions: not found
The complete terminal output from the program during one try is :
[username@hostname ~]$ x2goclient
ONMainWindow constructor
Can't load translator (:/x2goclient_en_us) !
Can't load translator :/qt_en_US
ONMainWindows constructor finished, home Directory is: "/home/username"
read 1 sessions from config file
start new ssh connection to server: "my.school.adress" : "22" krb: false
ssh connection ok
continue normal x2go session
close event
saving settings
done
waiting sshConnection to finish
sshConnection is closed
help please

Hello,
personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-8012) Company version mismatch
{b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
Hope it helps
Kind Regards

Having an error on my Flash Player install. Error stating "Actionlist Not Found". How can I fix?

Having an error on my Flash Player install. Error stating "Actionlist Not Found". How can I fix?

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

HT1338 Install failed OS X could not be installed on your computer

when up grading I get the mesage Install failed OS X could not be installed on your computer and it will not go past the 17 min to go stage, any ideas please?

Is your mac compatible with Mountain Lion? You can check the list of compatible machines here.

Install Failed: OS X could not be installed on your computer.

So my Macbook was bought last December 2012. It's specs should be able to run Mavericks.
I've downloaded the software already, so far so good.
When installation starts, it fails and I get this message:
"Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more"
Now it tells me to go to this page:
http://support.apple.com/kb/HT4649
Then I find the message above and tells me to go here:
http://support.apple.com/kb/TS3926
Then I try the solution in the 2nd link and still the installation fails.
Please note that I have a Windows 7 BootCamp Partition that I would as much as possible not delete or reformat as I have too many important stuff there.
Any ideas?

.Impact wrote:
Philly_Phan wrote:
.Impact wrote:
Philly_Phan wrote:
My WAG is that you have a HD space limitation. I've never used Boot Camp so bear with me. Is there any way that you could back up the contents elsewhere so that you can reformat and repartition?
I have an External Hard Drive here but it's currently being used as storage space for some of my media. Is it possible to backup to a partition of an external hard drive?
I've never done it but it should be possible. Don't forget that a "partition" acts like a real drive and it is a real drive in every sense of the word except that it shares a physical disc with another drive.
Will try that once I get home from University later. Should I back up both OS X and Bootcamp into the hard drive or just one of them? Then reinstall Mountain Lion, then install Mavericks? Did I get that right?
I don't see any reason why you need to reinstall Mountain Lion. It's been a long time since I've done any partitioning but, if I remember correctly, you can enlarge the main partition provided that there is no data in the secondary (Boot Camp) partition. If I'm correct, you'd need to first back up Boot Camp, then erase the original BC partition, then resize the partitions and finally load Mavericks.

It says "additional plugins are required to display all media.... " but when I click "Install Additional Plugins" they're not found ?? helppp

It says "additional plugins are required to display all media.... " but when I click "Install Additional Plugins" they're not found ??
All I'm trying to do is play a video but It won't let me.. any help??

Can you post a link to the page where you have that problem?

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

AIA install fails at step 10 of 11

Hi,
I'm running the 32bit Linux installer. The installation gets to the 'Deploy application pre-install' step and fails.
From the install log:
[2010-01-27T09:10:55.272+00:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 14] [ecid: 0000IPj2pVDBHB5_zP^AyW1BNzrx000005,0] Install Adapter: Mark End for:INSTALL
[2010-01-27T09:11:33.256+00:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.presentation] [tid: 14] [ecid: 0000IPj2pVDBHB5_zP^AyW1BNzrx000005,0] STARTING CONFIG OPERATION ...
[2010-01-27T09:11:33.258+00:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 14] [ecid: 0000IPj2pVDBHB5_zP^AyW1BNzrx000005,0] Install Adapter: Mark Start for:CONFIG
[2010-01-27T09:11:33.733+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /install/config/AIAConfig.jar
[2010-01-27T09:11:33.734+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /jdk/lib/tools.jar
[2010-01-27T09:11:33.735+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wlxbean.jar
[2010-01-27T09:11:33.735+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/modules/features/com.bea.cie.config.launch_5.2.0.0.jar
[2010-01-27T09:11:33.735+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/weblogic_sp.jar
[2010-01-27T09:11:33.735+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/weblogic.jar
[2010-01-27T09:11:33.736+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/modules/features/weblogic.server.modules_10.3.0.0.jar
[2010-01-27T09:11:33.736+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/modules/features/com.bea.cie.common-plugin_2.2.0.0.jar
[2010-01-27T09:11:33.736+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/webservices.jar
[2010-01-27T09:11:33.737+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar
[2010-01-27T09:11:33.738+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar
[2010-01-27T09:11:33.738+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/weblogic.jar
[2010-01-27T09:11:33.738+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wlclient.jar
[2010-01-27T09:11:33.739+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wlconnector.jar
[2010-01-27T09:11:33.739+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wljmsclient.jar
[2010-01-27T09:11:33.739+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wls-api.jar
[2010-01-27T09:11:33.740+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /bea/wlserver_10.3/server/lib/wljmxclient.jar
[2010-01-27T09:11:33.740+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /install/config/ASConfig.jar
[2010-01-27T09:11:33.740+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/adminclient.jar
[2010-01-27T09:11:33.741+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/dms.jar
[2010-01-27T09:11:33.741+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/jps-api.jar
[2010-01-27T09:11:33.741+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/junit.jar
[2010-01-27T09:11:33.741+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/ojdl2.jar
[2010-01-27T09:11:33.742+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/pcsconfig.jar
[2010-01-27T09:11:33.742+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/rdservice.jar
[2010-01-27T09:11:33.742+00:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 17] [ecid: 0000IPj3CX_BHB5_zP^AyW1BNzrx000008,0] [Action]: AIA Configuration. Library not found: /11jars/adminserver.jar
Anyone got any ideas?
Thanks,
Kev.

Hello Kev,
Could you share the all the logfiles under AIA_HOME/cfgtoollogs/oui including .out, .err files?
If you have not exited the OUI then you have to check for the logs under OraInventory/logs folder.
Also AIAInstallProperties.xml under AIA_HOME/<aia-instance>/config folder?
-Teja

Connect fails w/ ocijdbc11.dll not found

Using SQL Dev 1.5.1 I had a remote 11g connect begin failing with the error
<ORACLE_HOME>\bin\ocijdbc11.dll not found.
The file ocijdbc11dll is there.
This connection used to work all the time. It was a TNS connection.
I checked ithe connection properties, changed it to a Basic connection and now it works fine.
Why did this start failing? why the reference the ocijdbc11.dll? why did SQL Dev think it was missing?
I found a workaround, so it is not critical, but if I knew what happened, it would help my brain make sense of it.
Thanks!
Karen

The message includes the path ... cannot find C:\oracle\th11\bin\ocijdbc.dll
So I know - if the message is correct - it is looking there, not finding a file that is there.
I thought of the path thing and checked, since I had installed a Dev Suite and ifgured that may have thrown things off.
I edited my path the put the ...\th11\bin first. No difference. Using the Basic connection allows me to connect, using TNS does not.
So, I checked out the TNS entry again.
When I replace the host name with the IP in the TNS entry, it works via TNS.
Go figure.

Rfc conn.: Connect to SAP gateway failed , edit: Group PUBLIC not found

Hello!
I want to create a RFC connection.
In the "Connection and Transport"-Tab I fill out the fields: Target Host, System Number and System ID.
If I save the destination the fields Gateway-Host and Gateway-Service will be automatically filled out with the same input value of the Target Host field.
But there is no gateway for this system and if I ping the destination the following error message is shown:
Error during ping operation: Connect to SAP gateway
failed Connect_PM TYPE=A ASHOST=sma82 SYSNR=01
WHOST=sma82 GWSERV=sma82 PCS=1 LOCATION    CPIC (TCP/IP)
on local host with Unicode ERROR       service sma82
unknown TIME        Thu Sep 27 11:27:37 2007 RELEASE
710 COMPONENT   NI (network interface) VERSION     39 RC
         -3 MODULE      nixxhsl.cpp LINE        643 DETAIL
      NiHsLGetServNo: service name cached as unknown
COUNTER     6
How can I handle this?

Hi,
I have attempted to configure the Destination with a co-worker who successfully configured a Destination to the same R/3-System but with SAP NetWeaver 2004s and not with SAP Netweaver CE 7.1 SR1.
He said that in his case he connects to the Message-Server so we activated Load Balancing.
The Message-Server will be found now but the Logon Group cant be found:
Error during ping operation: Connect to message server host failed Connect_PM TYPE=B MSHOST=xxx.xxx.xxx GROUP=PUBLIC R3NAME=TDE MSSERV=sapmsTDE PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       <b>Group PUBLIC not found</b> TIME        Tue Oct 02 12:28:09 2007 RELEASE     710 COMPONENT   LG VERSION     5 RC          -6 MODULE      lgxx.c LINE        4392 DETAIL      LgIGroupX COUNTER     15
But the Logon Group is PUBLIC! I checked it with SMLG.
Any ideas?
Regards,
Armin

Cluster ID not found

Hello,
I´ve this error when I startup services Java in cluster envorioment (Windows)
CLUSTER ID (5002) NOT FOUND
Best Regards

Hi James,
Thanks for the reply.This is a standalone EP 6 instance.
Here is the output of ClusterManger.Properties
ClusterHosts=localhost\:50060
Gateway=false
ClusterElementName=Dispatcher 00_673887411
UpdateClusterHosts=true
DebugLogFileName=./managers/log/cluster/DEBUG.log
ClusterName=SAP J2EEngine Cluster
WarningLogFileName=./managers/log/cluster/WARNING.log
MemoryElement=false
PingInterval=1000
DependentElement=false
ClusterElementType=Dispatcher
PingReplyTimeout=60000
NoticeLogFileName=./managers/log/cluster/NOTICE.log
StartupFailedExitDelay=10000
RepeatToConnect=true
TraceLogFileName=./managers/log/cluster/TRACE.log
ClusterElementId=673887411
InfoLogFileName=./managers/log/cluster/INFO.log
OpenPort=50011
JoinPort=50010
Thanks in Advance.
Regards,
RC

AIA Instal failing on Cluster AIAReadJMSNotificationProcess not found

Similar Messages

Maybe you are looking for