Connect fails w/ ocijdbc11.dll not found

Using SQL Dev 1.5.1 I had a remote 11g connect begin failing with the error
<ORACLE_HOME>\bin\ocijdbc11.dll not found.
The file ocijdbc11dll is there.
This connection used to work all the time. It was a TNS connection.
I checked ithe connection properties, changed it to a Basic connection and now it works fine.
Why did this start failing? why the reference the ocijdbc11.dll? why did SQL Dev think it was missing?
I found a workaround, so it is not critical, but if I knew what happened, it would help my brain make sense of it.
Thanks!
Karen

The message includes the path ... cannot find C:\oracle\th11\bin\ocijdbc.dll
So I know - if the message is correct - it is looking there, not finding a file that is there.
I thought of the path thing and checked, since I had installed a Dev Suite and ifgured that may have thrown things off.
I edited my path the put the ...\th11\bin first. No difference. Using the Basic connection allows me to connect, using TNS does not.
So, I checked out the TNS entry again.
When I replace the host name with the IP in the TNS entry, it works via TNS.
Go figure.

Similar Messages

  • X2go : "Connection failed sh: 1: x2golistsessions: not found"

    i am trying to connect to a school computer via x2go. I can connect via ssh to the server and start x programs via x-forwarding and such. However i cannot connect via x2go in any way. I do not have admin permissions on the school computer but i can start a gnome session with the command "gnome-session".
    However when i start x2goclient and try to connect using in my opinion the same settings i get this error
    Connection failed sh: 1: x2golistsessions: not found
    The complete terminal output from the program during one try is :
    [username@hostname ~]$ x2goclient
    ONMainWindow constructor
    Can't load translator (:/x2goclient_en_us) !
    Can't load translator :/qt_en_US
    ONMainWindows constructor finished, home Directory is: "/home/username"
    read 1 sessions from config file
    start new ssh connection to server: "my.school.adress" : "22" krb: false
    ssh connection ok
    continue normal x2go session
    close event
    saving settings
    done
    waiting sshConnection to finish
    sshConnection is closed
    help please

    Hello,
    personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
    Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
    com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
    (-8012) Company version mismatch
    {b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
    In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
    Hope it helps
    Kind Regards

  • Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

    Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found.  Apple Mobile Device failed to start.  Error 7 Windows error 126.
    Deleting itunes and reinstalling does not fix it.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

  • My pc attempted to update to newist version of Itunes and got message MSVCR80.dll not found, failed to restart.  I retried download, restarted. NG.  Now I cannot open Itunes

    My pc attempted to update to new version of Itunes and got message MSVCR80.dll not found, failed to restart.  I retried downloading; restarted.  NG.  Now I cannot open Itunes.

    Hi yukejeff,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    Hello Don,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with these articles if you continue to experience issues with iTunes:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

    iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

    Click here and follow the instructions.
    (98918)

  • Itunes 10.5 doesn't open error: scarddlg.dll not found

    updated to itunes 10.5 installation went fine, when I start the program ...SCARDDLG.DLL not found and itunes failed to open...
    any help?
    thanks

    OMG i get the same thing !
    i had itunes open all day then i updated it to the lastest thing then it just wouldnt open ever , ive uninstalled and reinstalled about 4 times and still nothing, i wont more music but i can't coz itunes won't open. why does it have to be so difficult ...

  • Calendar Server installation gets error "libnmspr20.dll not found"

    Calendar Server installation gets error "libnmspr20.dll not found"
    <P>
    When installing Calendar Server 3.5 on NT near the end an error
    occurs: "libnmspr20.dll not found " and then it will exit the setup
    without completion.
    This is a bug because it is looking for the libnmspr20.dll in the
    system path but the Calendar Server installation has left it in a
    temp directory. This does not occur if the Netscape Messaging Server
    has been previously installed on the same host. A workaround is, when
    the error message displays, you DON'T press ok, but search your
    computer for the missing file (usually found in temp-directory).
    You then copy the file to a directory in your system path. Now you
    can press the OK button and the installation will fail. Re-install
    the calendar server, this time the installation won't fail.

    Installing Latest JRE on NT4 sp6a produces the same error:
    InstallShield DLL Custom Action:
    File 'C:\TEMP\RegUtils.dll' can not be found. Make sure the file is on the target system or installed already.
    I searched www.installshield.com since the error is an installer error and the installer is InstallShield. NO results found there either.
    Seems like the installer team needs to brush up on the NT4 platform.

  • Getting a error message when i try to open up i tunes file msvcr80.dll not found. I have tried to reinstall i tunes still wont work. Any ideas?

    getting a error message when i try to open i tunes, file msvcr80.dll not found. Have tried to reinstall i tunes but receive another error message when thats done down loading it reads service apple mobil device failed to start, verify that you have sufficent priviliges to start system. Any ideas?

    See  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found

    Hi and help,
    have searched the web and found other forum threads with similar issues.
    Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
    After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
    Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
    so select it from Power options..."failed to start as CpuPerf.dll is not running"
    Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
    So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
    Been on Toshiba support and tried to install Power Saver......same problem won't install .
    So help help help if possible.
    Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
    Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
    any help please
    Tim

    Cheers for the advice Andrei,
    so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
    If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
    Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
    also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
    Sorry for more questions but as you can see this is not familair territory for me!!
    many many thanks
    Tim

  • HT1926 msvcr80.dll not found

    I just tried to update Itunes and ended up with installation errors so I decided to download fromw the apple site directly.  Now I get a msvcr.dll not found error and can't get to itunes at all.  Anyone know how to fix this?

    Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
    If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
    If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
    For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
    tt2

  • Error "Connection Failed The server may not exist or is not operational..."

    This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
    Connection Failed
    The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
    It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
    Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

    Welcome to discussions leffjay. Good one. Cheers.

  • Downloaded latest version and now firefox won't open "mozjs.dll not found"?

    I downloaded version of firefox (5.0?), and when the computer restarted firefox won't open. I get a "mozjs.dll not found".
    Help?

    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

Maybe you are looking for

  • Multiple selction in the dropdownlistbox

    Hi All Can any one help me out that I am implementing the Drobdownlist for box for the multiple selections and to save the selected items in a database table. I have written code for the oninputprocessing. But I am getting error. unable to proceed fu

  • App Compatibility Submission Fee and Payment Schedule

    We are trying to submit an app for Windows 8.1 compatibility logo.  We login to the dashboard and submit the report created by the App Certification kit.  Next, the web site shows the "Legal Agreements".  We click on the link "Windows Certification P

  • Linking a select field with a text field in a DW form.....

    I did try to search for this but nothing came to my attention. Apologies if it is already in the forum. Is it possible to have a "select field" link with a "text field"? In other words The select field will provide different venues to choose from, in

  • Navigating values from one iview to another

    HI, We have created an Iview in Visual composer and has provided some "Name" and "EPCM Event". Now when i click on a button i shud pass a values called "Number" from this iview to another iview which is not a Visual composer iview. Can i know how can

  • ISight Blue picture

    I am having trouble with using my iSight camera and web based chatvideo. I always get a blue hue to the picture i am broadcasting. I have tried to update java, Quicktime and anything else i can think of. Any suggestions? I have even changed to quickt