AICC Captivate 4 won't send completion to GeoMetrix LMS

Hi,
I have a Captivate 4 course with several quiz questions. Completion criteria is pass/fail, scores only, report as score, report quiz results only. I am publishing in AICC format to the Training Partner 2009 LMS by GeoMetrix.
The LMS will recogize scores, but it does not register a completion status when the quiz is passed successfully. This results in subsequent course accesses remaining in 'credit mode' rather than the desired 'no-credit' or 'review only' mode. In other words, users can still change their scores after they pass, and they should not be able to.
Has anyone else experienced this issue with the GeoMetrix LMS? Is there a fix?
thank you,
Gary Poplawski

Hi There,
Welcome To Adobe Forum.
However you can try using SCORM CLOUD as an LMS to upload the published output.
Can you please try and upload the published output to an LMS called SCORM CLOUD.
You can create a free trial account on scorm cloud using the following steps:
Browse to  the link https://cloud.scorm.com/sc/guest/SignUpForm
Now Create your free trial account.
Now publish the output in a zip format (in the form of SWF with reporting option enable and choose “Scorm” from the option)
Now sign in into scorm cloud and upload the course and launch the output.
Please check the result and let us know if it works fine.
Thanks and Regards
Loveesh

Similar Messages

  • Sending completion information without LMS

    We don't have an LMS at this time.  However, we would like know if the user completed the quiz.  Any suggestions on what we can do?  Would it be javascript?
    Thanks!

    Hi!!
    You could try using the Internal Server for hosting the content and Quiz Result Analyzer to pull the result.
    This would allow all the users (in the same domain) to post the result of their course to the internal Server.
    What this to learn how to implement it :--http://tv.adobe.com/watch/publish-and-track-results/reporting-using-lms-or-internal-server /
    Thanks,
    Anjaneai

  • Captivate 3 not sending correct completion information

    Hi all, we are using Captivate 3, and are in the process of uploading our content to Element K's LMS.  We have tested some of the content, and its marking courses complete even though the completion criteria have not been met.  We have run through the content and achieved a failing grade, but the status changes to complete.
    Here is how we have set up our courses:
    In the Reporting Options, we have set Complete/Incomplete under Report Pass or Fail (Element K tells us they need this setting), Quiz Results only under Choose Report Data, Percent under Report Score to LMS as.  We have selected Never Send Resume Data under LMS Customization Settings.  In Pass or Fail options, we have 80 % or more of points to pass, and If failing grade Allow user Infinite attempts.  We are publishing as SCORM 1.2 (required by Element K).
    Can anyone shed some light on this?  Should a Captivate course send "completed" to the LMS on a failed assessment?  Help!  We are under very tight deadlines, so anything anyone can suggest would be appreciated!
    Thanks,
    Diane

    I've not lookede through the previous thread, but you've done variations on the settings?
    You have tried Pass/Fail instead of Complete/Incomplete? Generally, if you want a score to show, you need to use Pass/Fail. That's not always true, but a score is generally not associated with Complete/Incomplete in SCORM 1.2 (in my understanding).
    Have you tried the lesson through any test suite outside the LMS itself? That'd be my next step. The ADL Test Suite is the 'offical' tool for such testing but isn't very user friendly. Otherwise I'd suggest Rustici's Test Track
    http://www.scorm.com/scorm-solved/test-track/
    or the Reload Editor (which I've not used and am not 100% sure is for SCORM validation)
    http://www.reload.ac.uk
    Run the lesson through some SCORM tester and see if the values passed are what you expect. If not, change the settings, publish, and test again. A lot more efficient, hopefully, than going through the LMS itself and allows you to possibly determine an LMS issue over a lesson issue.
    HTH
    Erik

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • TS4403 I am not able to varify my account because the Resend Varification email won't send to my email.  What can I do?

    I am not able to varify my account to complete iCloud installation because the Resend Varification email won't send to my email.  What can I do?

    Contact iTunes store support for assistance: https://ssl.apple.com/emea/support/itunes/contact.html.

  • Captivate 6 not showing complete in LMS

    I can't get captivate 6 projects to show completed in my LMS (successfactors AICC format).  I can get captivate 5 project to show closed but not captivate 6.  Any ideas?

    Captivate 6 had totally revamped drivers for SCORM and AICC.  Adobe ditched the ones they had used previously and went with Rustici drivers.  Rustici are the people that make the SCORM Cloud LMS.
    I recommend you try uploading your content to SCORM Cloud to see if it works fine there.  If it does, then the issue is with your LMS, not your Captivate content.

  • Captivate 5 - Not sending LMS Finish

    All-
    I need your help to solve a frustrating problem.  I have been using Captivate for several years, and recently started using Captivate 5.  The courses I designed in the past were hosted on an LMS that was not SCORM compliant or even conformant.  We are transitioning to Element K which professes to be SCORM compliant.  I started by taking the courses which were built for the old LMS and turned on reporting.  I have made several test files with different settings, however, I see my problem in every case. 
    Here are the settings from my most recent upload:
    Reporting enabled
    SCORM 1.2
    Template: Send tracking data at end
    Manifest: Mastery Score set to 90%
    Report Status: Complete/Incomplete
    Report to LMS as Percent
    Report Data: Quiz Results Only
    Reporting level: Interactions and Score
    LMS Customization Settings: checked - Never Send Resume Data; checked - Escape Version and Session ID (<--- What exactly does this do and why/why not check it)
    Project End options: Close Project
    If passing grade: Continue
    If failing grade: Infinite atttempts, show retake button
    My problems are as follows:
    Element K launches the course in a new window.  Upon successful completion of the course (passing grade of 90% or better), the results page offers the "Continue" button. When the "Continue" button is pressed, the slide progresses to the next slide which instructs the user to close the window.  When the window is closed, it appears that Captivate does not send an LMS Finish command to the LMS, so the course is not marked as complete.  I used the ADL's "Test Suite" on the course and it failed because the course did not send an LMS Finish Command, however, I found that tool hard to use and sometimes I couldn't get the course to load at all.  Probably my newbie fault, but I don't know.
    Is there something I need to set in Captivate to make it send the LMS Finish?
    Should I remove that last slide that clicking the "Continue" button takes you too?  I put in in there becuse clicking "Continue" on the Quiz results page does nothing at all (at least on the front end).
    Does the "Close Project" option under Project End Options send the LMS Finish command?  Should that be set to something else? 
    Does the user have to click the "Continue" button on the Quiz results page to send the LMS Finish command? 
    One one of my previous test courses, I unchecked "Never send Resume Data" as I wanted the user to be able to return to the course where they left off.  This worked fine until they completed the course (but was not marked as complete in the LMS due to the above problem); when they returned to the course again, they were sent to the last slide of the course (the one that tells them to close the window).  Will this always happen or will the bookmark "reset" once the course is shown as completed in the LMS?
    I am new to SCORM and what little I know has been learned by reading on the web/forums while searching for solutions to this problem.  Any suggestions, hints, tips or tricks with regards to SCORM and Captivate 5 and/or Element K would be appreciated.  I have exhausted the forums and even tried scanning some resource books to try and understand the settings within Captivate in regards to what they do and how it effects the course.
    Thanks in advance!
    Katherine

    HI
    I've learned that using the "Close Project" option is the best one. Make sure that the "result"slide offers the last button available for the user. The one that shows up as deafult, marked "Continue", is the one I use to end the course. Rename it "Close & Save". By doing this the course closes and the SCORM results are sent to the LMS.
    What I've noticed is that not all previous releases of browsers does this very well. 6 months ago, I couldn't make Safari, Opera, Chrome or FF work. But recent updates have fixed this. Today, Opera is the only one with an issue, it works,but very very slowly.
    Hope this helps:)
    BK

  • Captivate 6 not marking completions using IE 8

    About 90% of the employees completing a course that was created in Captivate 6 are not showing a completion status on the LMS using IE 8.  I understand that this is a provlem with IE 9 but I did not find any other documentation regarding IE 8. Has anyone else experiences this issue and if so, did you find a resolution other than adding a button to indicate the course completion?  There is no quiz with these courses.

    Hi, I am having similar issues under slightly different conditions...
    I am using:
    Captivate 7
    SCORM 2004
    Template: SendTrackingDataAtEnd
    Cornerstone LMS
    Multiple Browsers: IE8, Firefox, Chrome
    About 10% of my users are unable to complete their training even though they satisfy the completion criteria (view 70% of the slides.)
    No matter how many times they review the content, the LMS still shows the online lesson as 'In Progress.'
    I tested a sample course on the Scorm Cloud and it worked fine and showed completion across multiple browsers... Does this mean it is purely an LMS issue? How might I change my captivate file to send the time/completion data in a different way that my LMS may receive more frequently/efficiently?
    Thank you for your help.

  • Can't send emails on my S5.  Sends fine from gmail, but won't send from verizon account.  Keep getting "Sending Failed" message.

    My S5 won't send emails from my verizon email account, which is the default email for my phone.  It will send fine from gmail, but when I try to reply to messages in the verizon account, I get a "Sending Failed" message and an eternal loop from my outbox trying over and over to send the message.  Does anyone know how to fix this?  I took it to the Verizon store for help, and they were completely useless.

    The tech help is useless.  You have to load it manually but you must know the ports to use for both sending and receiving. You must get them from your Verizon fios account.  This worked for me.
    Sent from my iPhone
    << Personal information removed to comply with Verizon Wireless Terms of Service >>

  • IMessage won't send or receive pictures

    iMessage won't send or receive pictures, no matter how big or small they are. Not issue sending pics from iphone or ipad. if i access the file transfer window, it shows the following message below each picture that did not go out:
    NSURLSession error: The operation couldn't be completed. (NSURLErrorDomain error - 1200.) ((null))
    Any ideas?
    This issue started a few days ago, no changes in SW or HW ever since, so not sure what is going on.

    Hi,
    Try zipping/Compressing the files or pic first.
    Other people are having the issue and the zipping is the only work around we have discovered so far.
    8:55 pm      Sunday; April 26, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I recently updated to Mavericks and now all my e-mail accounts won't send

    I recently updated to Mavericks and now all my e-mail accounts won't send. They all receive ok but when I send I get a message "sender address rejected by server" and " Authentification required" The passwords are still intact

    Check the Mail settings for your account, especially the SMTP (outgoing) address, type of authentication, and entry of the proper email username and password. You can do this when you select the account then under the outgoing mail server use the dropdown menu to select the Edit option. Select your outgoing configuration in the list. Check the settings below, then click on the Advanced tab and check those settings.
    If all is OK, then I suggest your reinstall Mavericks:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • Email attachments won't send

    I've been trying to email some photos using the Mac mail but they won't send. I keep having to revert to Outlook to send them.
    I have no problems sending emails without an attachment.
    The problem seems to be with larger attachments although I can recieve OK.
    Please can someone help as I don't want to keep having to rely on Outlook?
    Thank you

    No email setting would stop an iphone from talking, connecting, to a computer. Two totally different things and completely unrelated. Also none of the settings for your email on your computer has any effect with the Email settings on your phone. Two totally different independent devices and totally different settings. One can not influence the other.
    Be advised that most ISPs put a limit on how big an Email attachment can be for both sending and receiving. And that limit is around 10MB for most ISP, and or Email providers. So even though you can send attachment greater then that soft limit of 10MB doesn't mean the person you are sending it to can receive it as their ISP may reject it because of the over the limit size of it.

  • My iMessage won't send. Can anyone help?

    I've tried turning it on and off bit it still won't work! It will be sending and then when it has a little more to send it won't send! This is not the first time I've had this happen. It also happens on my iPod touch. Can anyone help? Thanks :)

    Are you trying to message another Apple device?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • IPhone 4S SMS won't send

    I have just swapped phones and my SMS won't send, the address box for the iMessage has the old number in it and I can't change it, even when I change my number in phone.
    Can anybody help please?

    I also have this issue on my 4s.
    im on o2-uk.
    everything worked fine for 4 months until yesterday between 4pm an 7pm my signal dropped completely altough it still showed the 3g icon which changed to the little circle for gprs and back to 3g. so therefore i cant send or recieve calls or sms messages.
    yet data works fine with browser, emails, imessage other apps etc. i was on 5.0.1 at the time, i updated to 5.1 still same problem then i tried restoring problem still exists.
    i have spoken to o2-uk who have no idea about the issue and after we went through their checklist still same problem. tried sim in another phone worked fine also tried a friends orange-uk sim in my phone and guess what same problem.
    any help would be great thank you

  • TS3899 wrote and email but it won't send or cancel-screen frozen

    wrote and e-mail but it won't send or cancel-screen is frozen.  Every other function works

    If the reset does not work, try quitting mail completely and then restart the iPad and see if you can cancel the email or send it.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for