Aif files coming up as 'not found'

i'm constantly having problems with individual tracks going missing after i've saved the projects i'm working on. when i re-open them they are no where to be found and i often have to go back and re-record parts again or dig up older versions. weirdly enough when i get the 'aif file not found' message on one version, it also seems to affect older versions that have been filed away. does anyone have any idea why this is? has any one had similar problems? and more importantly does anyone know how to recover missing aif files or have a solution to stop them disappearing?
thanks

thanks! i have started archiving now and it's going a lot better, but it created no end of headaches for me previously, because i used to think i'd been updating and saving new versions, only to find that if i'd got rid of the old ones then when i came back to the new ones none of the files were there! why don't they tell you this in the section on recording? it would have saved me heaps of grief!
thanks

Similar Messages

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

"Unable to view this file because Acrobat was not found."

I Downloaded Adobe Creative Suite 6. I created an Interactive PDF Form and then tried to export the form to PDF. I get the following error. "Unable to view this file because Acrobat was not found."
What do i need to do to get this to work?

In the Export dialog, try turning off the box that says View PDF after Exporting. It may be on by default.

Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-Igor

Hi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

Configuration file jdbcpds.conf is not found.

Hi,
My problem is: Configuration file jdbcpds.conf is not found
When: I've this problem when I try to run a report with rwrun. The file is in the reports/conf folder. We try execute this reports at the client side.
I think that reports doesn't find the conf files because folder's name have changed. In wich configuration files/registry/env. path i can put the access to the reports/conf folder?
Under 10g
Thx very much

I've found my problem
in ORACLE_HOME\cauprefs.ora I've to add this line
Reports.PluggableDataSourceFactories = "oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory"
in ORACLE_HOME\reports\conf\rwbuilder.conf I've to add this line
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
that it!

Linking simpserv on AIX xlC Compiler: input file BS-830086.c not found

Hello Tuxedo Experts,
I am trying to link (compiled successfully) the simpserv taken from Tuxedo samples and getting the following error:
==============================
/usr/vacpp/bin/xlC: 1501-228 (W) input file BS-830086.c not found
==============================
Please note, I am not using the usual command (buildserver -o simpserv -f simpserv.c -s TOUPPER) as it implicitly tries to use cc compiler. I am on AIX 6.1 and have to use xlC compiler. I used the command that ran behind buildserver command, that is:
/usr/vacpp/bin/xlC -brtl -qstaticinline -qrtti=all -I$TUXDIR/include -o simpserv BS-830086.c -L${TUXDIR}/lib simpserv.c -brtl -qstaticinline -ltux -lbuft -lfml -lfml32 -lengine -lpthread
Would you please help me in resolving this error.
Thanks & Regards,
Ahsan Asghar

Hi Ahsan,
If you check the documentation for the buildserver command (as well as one of my posts) you'll see that you can define the CC environment variable to point to whatever C compiler you want buildserver to use. So in your case you should do:
export CC=/usr/vacpp/bin/xlC
before trying to use buildserver and then it should use the xlC compiler.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

How To Unravel files in project area not found

I create 9 Premiere projects, each under a root directory (proj/p1;proj/p2;proj/p3;etc.).
As I was working on my videos I was capturing screen shots of the video and using them on different layers. that is, I would be in proj/p2 and I woud capture screen shots to proj/p2/assets. The problem is that sometimes I would forget to change the capture directory and I would be in proj/p3 and I'd capture the image to proj/p2. I did that a lot.
So, I changed to a different computer that had a different real path to proj and now, all the images I did the "cross capture" incorrectly don't show up. When I try to do a "reattach" the file that is showing not found, it does not actually attach it. I have to re-add it to my project and surgically replace the new file on the time line (very painful and slow).
Any suggestions on how to do this faster? (or am I not being clear)
thanks

Nope.
The moral of the story...don't move things around.

Audio File "16n7aD#3.wav" not found! error when bringing up Piano & String

Hi All,
I just upgraded my Logic Pro 7 to Logic Pro 8 Studio last night. I installed all audio content and Jam packs as well onto my hardrive. This morning as I was going through the different samples available on EXS24, when I tried to load the Pop Piano & Strings or another Piano with strings, I got the following:
EXS24 instrument "Grand Piano+Strings1.exs":
Audio file "16n7aD#3.wav" not found!
Any one else get this error? What is going on? I installed all the DVDs so not sure why this is missing. Please advise as to what I can do to fix this.

That's a known issue - so you're not alone. Use the Search function and you'll find hundreds of threads about this. There are fixes though so you'll get everything working
http://discussions.apple.com/thread.jspa?messageID=6010096&#6010096
http://discussions.apple.com/thread.jspa?messageID=5946041&#5946041
http://discussions.apple.com/thread.jspa?messageID=6274263&#6274263
http://discussions.apple.com/thread.jspa?messageID=6289747&#6289747

Error Configuration File bc4j.xcfg is not found in the classpath

I am new to JDeveloper and ADF, and am suffering through the steep learning curve. This story may prove useful to someone, someday.
I just finished resolving a “bc4j.xcfg is not found in the classpath” error and it added another level of understanding to how things are glued together.
There is a back story. I had made a first pass at creating a test application. When I was done I started “enhancing” the application. One of the changes was to add a column to a view in the database. Try as I might I could not get that change propagated to the business component. This is still on my to-figure-out list. In frustration I dropped the model and recreated it from the database tables and views. Testing it with the “AppModule” in the model project I could see the view with the new column. However, when I went to run one of my old jspx pages, I now got the dreaded “bc4j.xcfg is not found in the classpath” – and this was for a page that was not using my updated view. As the military expression goes, “Whiskey Tango Foxtrot”.
It is now working again, and here is what I found.
I noticed in the error message that it could not find “/cloudapp1/common/bc4j.xcfg”. When I searched for the file I found it in /cloudapp1/model/common/bc4j.xcfg. I went to the project properties for the model project and on the “Project Source Paths” node I saw at the bottom of the page Default Package: cloudapp1.model. Ah Ha! That is where the /cloudapp1/model structure came from. Then I remembered that the first time through I had changed the default package to just cloudapp1. Part of my experimenting with the product. When I quickly rebuilt the model project I did not do that.
Next I found the DataBindings.cpx that one note alluded to. It is in the ViewController project. There I found an “OC4JDataControl” section. In there was and entry Package=”cloudapp1”. This was the original package name. When I rebuilt the model, this was not updated. Anyway, I changed it to Package=”cloudapp1.model”. [ Insight: When you first build an app it can make some good guesses about what is needed, but when you start adding and dropping projects it is much harder to guess how they are glued together.]
Raising a cup of coffee in triumph I re-ran the test page.
Dang! Still a bc4j.xcfg not found in the classpath – but this time the path mentioned matched the path where I knew the file to be.
I am nothing if not stubborn. I knew the problem just had to be in the ViewController project, because the AppModule in the model project worked. So, I started going through all of the project properties. I finally came across something called “Dependencies” that had big ugly red circles with an x in them. Ah ha. This is what tells the ViewController what other projects (like the business model project) this ViewController is dependent on. Although the editing process it not obvious I eventually pointed it to the new model project. [Deepening insight.]
When I re-ran the test page it worked! Coffee finished. Story with a happy ending.
Summary:
1. Make sure the package name in the ViewController DataBindings.cpx matches the one in your model project.
2. Make sure the ViewController Dependencies entry points to the model project.

Thought I'd add a little bit more to this post I found helpful.
I'm creating an application which uses other application ViewController projects deployed as library .jar files. If your .jar ViewController project deployment profiles don't have your Model project as a dependency, you will get the .bc4j error as well.
This can be confusing when the ViewController pages function correctly when run within their own application context, but somehow lose their bc4j when deployed as a .jar.
Hope that helps someone down the road.

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

File or BD-Export not found in CD/DVD

Dear All
I want to install IDES 4.6 C on windows 2000 advance server with DB MS SQL 2000.
My CD/DVD from SAP as follows this:
1.DVD 51017108 1of2 (R/3 4.6C; inc.Support 1-28; DB-Export Part 1; Ides WP-Doc as label) have folder:
     a. DB_Export -->DB export 1
     b. Ides_Doc
     c. inst_guide
2.DVD 51017108 2of2 (R/3 4.6C; inc.Support 1-28; DB-Export Part 1;Kernel 4.6D SR1 as label) have folder:
     a.DB_Export -->DB export 2
     b.Kernel
3.DVD 51031281 (MS SQL 2000; RDBMS inc.SP4; SQL4SAP;VBS as label) have folder:
     a.download
     b.IA64
     c.Setup
     d.x86
4.CD 51011909 (SAP Release 4.0B, 4.5B, 4.6B/C/D; MS SQL Server tools as label) have folder:
     a.ADDONS
     b.DOCU
     c.NT
5.CD 51019881 (SAP R/3 4.6D; SAP Kernel MS SQL; NT/A64) have folder:
     a.DOCU
     b.NT
I was finish and succes to install MS SQL + Sp4 with DVD 51031281
and then i install SAP inst and finish with DVD 51017108 2of2 in folder E:\KERNEL\MSS\CD51015077\NT\setup.bat
When i install Central & Database instance from Star Menu->Programs->SAP System Setup for C11, the system only aks to enter :
- Kernel     : DVD 51017108 2of2
- DB-Export1 : DVD 51017108 1of2
after +/- 70 % of install progress,i have warning and error install like that:
=======
Warning: DBR3LOADEXEC_NT_MSS SetCmdDefaultForDatDirExt 2 722
File: E:\DB_Expor\DATA\SAP0000.TOC not readable.
Warning: DBR3LOADEXEC_NT_MSS SetCmdDefaultForDatDirExt 2 722
File: E:\DB_Expor\DATA\SAPVIEW.TOC not readable
=======
i tryed to find that file on all my CD/DVD for reinstall, but not found.
Where can i find that file..? for solving installing,
this is first option
And then second Option i try reinstall SAPInt and succes using CD 51019881 in folder E:\NT\setup.bat.
When i install Central & Database instance from Start Menu->Programs->SAP System Setup for C11, the system aks to enter :
- Kernel     : CD 51019881
- DB-Export1 : DVD 51017108 1of2
- DB-Export2 : DVD 51017108 1of2
- DB-Export3 : none -> because my DVD/CD only two DB export
after +/- 0 % of install progress, i have warning and error install :
========
Warning: CDSERVER_NT_MSS ConfirmKey 2 579
We tried to find the label SAP:R/3::EXPORT(1/3): for CD EXPORT1 in path C:\Master SAP\CD1. But the check was not successfull.
Info: LvKeyRequest
For further information see HTML documentation:
step: GETDBSIZEKEYS_IND_IND and key: EXPORT1_LOCATION
Error: CDSERVER_NT_MSS ConfirmKey 2 579
Error during confirmation of key: EXPORT1_LOCATION.
Error: GETDBSIZEKEYS_IND_IND GetConfirmationFor 2 579
No value for Key: EXPORT1_LOCATION
Error: GETDBSIZEKEYS_IND_IND ColdKeyCheck 2 579
Phase failed.
Error: Main {} 2 579
Installation aborted.
=========
Are there anyone who can help me,
if 1st option is true where i find that file and if 2nd option is true where i find DB-export3, or any other option , or true step by step
please help me
regrade
imron

Maybe the installation bits you are using is too old, but it looks like there's a maximum 8 character length for the directory. The error you posted states:
Warning: DBR3LOADEXEC_NT_MSS SetCmdDefaultForDatDirExt 2 722
File: E:\DB_Expor\DATA\SAP0000.TOC not readable.
Warning: DBR3LOADEXEC_NT_MSS SetCmdDefaultForDatDirExt 2 722
File: E:\DB_Expor\DATA\SAPVIEW.TOC not readable
Is the directory name really "DB_Expor" (8 characters)? Or is it actually "DB_Export" (9 characters)
I would try renaming the directory to just "Export" (6 characters) and restart the install.

OBIEE installation error: file EmctlCommon.pm.template not found

I'm installing OBIEE 11.1.1.6.0 on Linux Centos.
I have this error running the installer
"/app/MiddlewareOracle/middlewarehome/oracle_common/bin/EmctlCommon.pm.template not found"
/app/MiddlewareOracle/middlewarehome is my installation home directory.
I don't understand why installer did not copy/unzip this file in oracle_common.
I don't think it's a permission issue: there are other files in the directory.
Log simply report the error with no further information.
Some advice?
thanks
Luca

Sorry
Probably the error was due to an error during the unzip of files downoladed from Oracle.
Solved.

Files on 60GB iPod not found after updates to 1.2

Before I restore just thought I would check. My iPod is conflicted as to what is loaded. Problems occur after update of iTunes 7.0 and iPod updater 1.2.
Manually update is set. iTunes 7.0 says I have 6.0GB of Audio, 13.82GB of Video on a total capacity of 55.68GB iPod. However it also says I have 54.84GB of free space? All music and video files appear with the ! in iTunes, which means file not found.
However, all titles of the files appear on the iPod as if they were still there but just not readable? From the iPod's settings, under About, it shows I still have 1250 Audio file, 98 videos but 54.84GB of space available. If I try to play files in a playlist, it just breezes through the album art and titles like it can't read the files.
Reset, reboot and reinstall does nothing.
iPod is unusable, should I wait for another update?
Should I just restore and loose some stuff that was not backed up? (stupid on my part I know.)
Or does anyone else know of a possible trick I could try?
Dell Windows XP
Dell Windows XP

Applied Firmware Update 1.2.1 and it worked...
Thank you Apple for finally fixing a major problem
without ever acknowledging you had it...
or even indicating what you update fixed when you distibuted
it...
I think apple needs some lessons how to provide support...
without irritating its customer base...
All you have to do is communicate...
Respond with a message like "Known Problem" working on fix.
would do wonders... And having an apple employee update
the Discussions with an indication that you acknowledge
your user community is having a serious problem and thank them for continueing to wait for a fix..

Class file javafx.lang.Builtins not found

I just installed Netbeans 6.5 with jdk1.6.0_11 and javaFX 1.0 and latest updates on windows XPSP3. If i create a new JavaFX class all javaFX components are marked with a warning sign "cannot access javafx.lang.Builtins class file for javafx.lang.Builtins not found".
with netbeans 6.1 and javaFXpre1.0 i didn't have these problems but there were no Swingcomnponent class available.
Has anyone an idea how to get rid of this problem
Thanks Marco

The Feb 2009 update gives a slightly more helpful additional message for the package error when hovering over the package's name: "File looks to be in non-JavaFX project"
Create a new project of type JavaFX and put your source code in that and all the errors go away. (Couldn't find a way to change existing project type in Netbeans).
Despite the IDE warnings it does seem to compile OK (assuming you have no other errors).

Aif files coming up as 'not found'

Similar Messages

Maybe you are looking for