Condition value not copied
Hi,
I have a bussiness scenario where i have a service sales order(OBOS), then a Entry of services performed Sales order(TBSS) and with reference to the last one i create the invoice.I have a condition in my second sales order, where i insert a value, the problem is that the condition value is not copy to the invoice.
The Copy Control settings are:
OBOS to TBSS - G
TBSS to FAZS - C
How can i solve this issue???
Please suggest.
Read SAP note <a href="https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=778976&_NLANG=E">778976</a>
Ask you BASIS person to apply neccessary patches.
Thanks,
Ashish
Similar Messages
-
Price and Pricing conditions are not copied to PO for a line item !!
Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRamWhat kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply -
Statistic condition values not updated during Sales order Settlement
Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
ThiruHi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh . -
SRM 7.0 PO Condition are not copied in ECC po
Hi Experts!!!
i am facing the problem SRM 7.0 PO Condition are not copied in ECC po, Net price is Coming instead of Gross price. & is there any BADI why which i can Fecth the Condition Data From SRM Quotation to ECC.
pls help me it is go-live critical.
regards
vikasHi Masa,
1. Do the texts need to be mapped in the node that you hjave mentioned. Sould not the SRM texts be mapped to ECC textx by default . After all , it shoud be standard predelivered feature . I have not done any mapping but still the SRM supplier text in shopping cart line item , flows into ECC Material Text in ECC PO line item.
i.e by default SRM supplier text in shopping cart line item = ECC Material Text in ECC PO line item.
No other text from SRM SC or PO ir flowing into ECC PO
Rgds
Sumendra -
Condition Values not being copied when creating sales order with reference
hi experts
i am copy a sales order with reference in va01 , when i copy the order it status is shown as incomplete beacue the condition values in some condition type sis zero, whereas if i delete amount for some condition type and re-eneter it the condition values for all conditon types appears ...
in all after copying order i go to condition at item level some codition values are zero but if erase amount for any condition type and then re enter it value comes for all condition typesHi Sunny,
Maintain some value against that condition type in VK11.
This must solve your question. Please set to resolved if it solves your doubt.
Regards
Abhii.... -
Condition value not updated when qty changed
hi all,
I have created a new condition ZPR1 (copied from PR00) and use a new formula for it.
There is a problem when I change the qty after the item is billed.
Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the ZPR1 price is still 100! It will change to 200 if the item is not billed.
Anybody encounters such problem and how to solve?
ThanksHi,
I don't mean to change the unit price.
I mean the condition value (the item total price) is not updated
You can't change the price anymore in the condition tab after you billed
But when you change the qty of the item, the total value should change accordingly
And I think for my case I should not cancel the invoice. Suppose original qty is 10, and there is partial shipment of 7 and billed the customer. Later customer request to reduce the qty to 7 to complete the item. We should not cancel the invoice in this case.
Try to test with PR00 and PN00, you will see the item value will be changed according to the item qty. -
JECV CONDITION VALUE ARE COPIED
HI
During import process the after invoice verification for the customs
condition value JECV(ECess on CVD in %) is not copied while capturing the excise invoice all other duties are defaulted.
Regards
Umapathy.MHello Umapathy,
Check in your import pricing procedure, whether the condition type JECV itself is used for ECess on CVD.
Also whether the customs miro was done with JECV condition type.
Regards -
Unit Conversion value not copied in Proforma invoice
Hi
I have sales unit and base unit of measures are different which are defined in material master. When I create a sales order, in condition tab, I can see the conversion value between condition unit and base unit. But when I create order related proforma invoice, conversion factor is not copied in condition tab there, though it works fine with delivery related proforma invoice.
What could be the reason.
Regards,
Neeraj SrivastavaHi,
discussed the same issue in these threads -
Proforma Invoice configuration/ assignment
Proforma Invoice for Sales Order
proforma invoice
Re: How to Create a Pro Forma invoice (F5) for selecetd items in the order?
Regards,
Raj -
Condition types not copied correctly from Me11 to Me21
Dear All,
I am facing a problem in my client place, it is a import scenario where i create ME11 for a material with a combination of a vendor. After maintaining condition types like J1CV, JSDB when I am creating PO for that vendor condtion types are not copied exactly..system excludes some condtions i dont know why but it is working perfectly ion the Qlty system problem is only in Production..pls help me to over come this problem
Regards
SaruHi,
Mike is right, it is likely to be a problem aith the priccing procedure.
The procedure allocated to the PO may have been set up without the conditions you used in the Info record?
Check the assignment of the pricing procedure to the PO (there may be a vendor schema group on the vendor master record purchasing view that is pointing to a different schema)
Check in SPRO Logistics > Materials management > Purchasing > conditions > define price determination process > define schema determination.
Look for any setting that uses the schema group from the vendor (if the vendor schema group is blank then the system will use the schema associated qwith a blank schema group).
Then when you can see what schema the P org and vensdor group are pointing to, check the condition types linked to that in the "define calculation schema" menu above the one you just used in SPRO.
Steve B
Steve B -
Condition records not copied from order to invoice
Hi,
I created an order and it has contion types for Frieght cost and packing cost...for both condition rocrds were found and triggered in order but whn cheked in invoice...records are not copied to invocie level..and when checked in analysis it says "access not made" for both the conditions...
Fields combination for these are shipping point and material frieght group for both condition types...
i checked the validity dates for both conditions and are still in validity dats.
Can anyone advice me is there some thing else i need to check and why condition records are not copied to invoice.
Thanks in advance
BaluHi Sumanth,
Copy controls are fine...it is actually delivery related billing scenarios..and in delivery to billing copy contrls in header in determine export dat feild it is set to "B :Redetermine the export data" and at tiem level the pricing type is set to "C:Copy manual pricing elements and redetermine the others"
Kindly let me know if the settings are fine or the problem is woth these settings
Regards
Balaji -
PO service item - custom field value not copied to GR
Hi All,
I have a custom field in SC,PO and GR. For a sevice and limit items, the value in custom field in PO is not copied to GR. For goods, it is copied.
When I debugged, I found that the system tries to match PO item internal number with that of backend item internal number. If this is matched, the custom field values are copied.
But here it is not matched. What can be the possible reason. Is there any configuration for item internal numbers?
I found a note 848797 for transfer. But exactly at the corrected code in note, program is failing.
Have anyone faced this issue before?
Thanks
NandalalYes Disha, the notes are correctly implemented.
I am confused on whether the internal number generated for the item is copied from some configured internal range, because when I enter two service items, the items shows backend internal numbers like 0000000010 and 0000000020 (increment by 10). But in SRM it is 0000000001 and 0000000002.
When the code tries to match the respective numbers, it fails and skips the logic to copy custom fields.
I dont have access to r/3 data.
Please help.
Have anyone tried to create a GR with service item and has custom field?
Thanks
Nandalal -
Condition type not copied to invoice when used from VK11
Hi ,
I have a peculiar situation in which when I add the sales price condition type ZA01 from VK11 in the sale order, the condition type does not get copied into the invoice. But when I add the condition manually in the Sale order the condition type is copied in the invoice.
Can any one suggest what settings need to be made.
Regards
RasheedKindly check, in your condition type: Under Changes which can be made section see what you have maintained in Manual entries.
If above is with option NO limitation then check whether any pricing procedure is maintain for your this Billing Type you are using.
If helpful kindly reward.
Take care.JP. -
Condition YPS1 not copied into Billing document
Hi All,
I have an urgent issue wherein my condition YpS1 determined in the sales order is not copied into the billing document
Any suggestions would be appreciated... The YPS1 is pulled out from the standard price from the material master
Any suggestions would be appreciated
Thx,
VinayThanks for the reply.really appreciate it.. On further investigation my copy control is set up in this way,
SO --> Delivery && Delivery --> Billing.
In my Billing copy control(Delivery- BillinG) i have a pricing tye set up as Customer Reserve X.... do you think i might have to check this???Please advice where to check as i do not have any idea on what this customer reserve X means??
Thanks again
Regards,
Vinay -
Zfield value not copied in copy control
Hi Experts,
I have created zfield "net value" in complaints item list. when i do copy line item from order to complaints, all the other standard field values get copied except zfield which i have added.
Kindly suggest how to solve this issue.
Thank you,
ChaPlease use the copy control BADI CRM_COPY_BADI. This functionality is achieved through copy control feature. For the standard components , the standard fields are copied but for custom fields you have to implement the BADI CRM_COPY_BADI.
Regards
Kavindra
<Moderated>
DO NOT ask for Points.
<Moderated>
Edited by: Harshit Kumar on Nov 16, 2011 8:52 AM -
JASS condition value not multiplying
Dear All,
I have a small issue, wherein condition record has been maintained for JASS (material assessable value) as INR 200 per piece with calculation type C (changed from B to C).
In both the scenarios of calculation types being B or C; for example if there is an order of 10 pieces of the material; condition value in the line item Condition tab is showing as only INR 200 instead of INR 2000. JASS is made statistical in the pricing.
Kindly suggest if there is any error in maintaining the condition record.
Thanks and Regards
AdithyaThanks Shiva Ram
Actually I had made a mistake by not deleting the earlier condition record which I had maintained in a different key combination. Now it is working fine.
Thanks for your suggestion.
Regards
Adithya
Maybe you are looking for
-
Problem w safari and hp laserjet printer
Thanks for any help. My computer cannot find the hp laserjet 4050tn in printer preferences. It goes through a wireless router but I am not using wireless--using ethernet instead. My computer can find other computers on my LAN. While in Safari, if I t
-
When I try to open Firefox from my desktop it will not even open to the internet, it does pop up a box that says "do you want to report this crash" I have sent the report and still can not have any luck fixing this problem. I can go to the internet i
-
We have a user account on our lab computers for required testing. After logging in to the test account, the test program (NWEA TestTaker) launches, and a user name and password is required to continue. When using a UNIX command to simultaneously logi
-
IPhone 3GS - download error tap to retry
I know it's been asked before but I haven't found an answer that works yet. I have an iPhone 3GS running IOS 6.1.3 connected to my iTunes account with a valid an active iTunes Match subscription. This has been working perfectly until the last couple
-
Equipment BOM & Function Location BOM
Dear All, We are created functional location BOM and we are created Functional location order.In that order i found the Equipment BOM which are linked with functional location.I assigned functional location BOM as well as Equipment BOM items for t