AIR 2 debugger not recognizing extendedDesktop profile in Flash CS5 Win

In order to test the new NativeProcess API of Air 2, I checked the required profile of "Extended Desktop" in my Publish Settings in CS5. When testing, though, I found NativeProcess was not supported in the debugger. I then published the FLA as a Windows EXE and installed it, and NativeProcess was working as expected. Having to publish a new exe every time I test is a big waste of time, so I instead used the command line ADL tool to debug, and by specifying "-profile extendedDesktop", I was now able to test my app with NativeProcess.
This should get fixed, as it is definitely an issue with the debugger running via Flash CS5.
- Gabe M.

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

Similar Messages

  • New Pioneer DVD drive not recognized in profiler

    I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
    I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
    A big thank you to anyone who can help me through this.

    Since your computer's Apple Hardware Test is on a disc and the built-in optical
    drive won't work, you may have to see if an external optical drive capable of
    being used as a boot, is available. This of course would be a FireWire combo
    type drive that can read & write DVD & CD media and boot Macs.
    You may have to see if you can archive anything worth saving from that eMac
    and put it on media via another computer; if the eMac can be booted into
    Target Disk Mode where it is seen by another computer as a FireWire drive.
    In fact, you could see (in a reverse scenario, perhaps?) if another computer's
    optical drive could be used by your eMac, if a second healthy computer is
    available & then boot it into FireWire Target Disk Mode to see if you can use
    the optical drive in there as though it were a peripheral. - This may not work.
    I've not had to really use FireWire Target Disk Mode, but do have cables,
    and an externally enclosed LaCie FW HDD which is partitioned for clones.
    There are times where a FireWire externally enclosed superdrive is handy.
    There may be some damage on the logic board or some circuit that does the
    controlling of ATA devices on one of the buses in the computer. That would
    be a possible cause of the issue. If the identity of this drive can be changed
    by the user before it is installed, be sure that is set correctly for use in eMacs.
    {The three eMacs I've owned, had issues early on and I got rid of them in mere
    days of first purchase; at considerable distance and effort by me. Then I got
    an iMac which was an unholy terror to debug after an 'authorized service' ctr
    did their best to kill logic boards and sell me defective store-brand RAM they
    were authorized to install in a place I was not. ThreeThousand Miles and Six
    Months later, I finally got my iMac back, repaired. Only because Apple told
    them to read my test notes - & just install the parts I said it originally needed.}
    Do you have a second Mac nearby (presuming yes, and using it online) which
    may be used to attempta further diagnostic or testing of the eMac?
    Not sure if an Apple Hardware Test would be sufficient to tell the issues in
    your computer; if you have a way to make use of it via external FW. Hope-
    fully someone with more extensive eMac and drive experience will advise.
    Good luck & happy computing!

  • Adobe AIR - java is not recognized as an internal or external command operable program or batch file

    Hi,
    I've done everything as in the HelloWorld tutorial but when i run this cmd: adt
    it gives me the following error java is not recognized as an internal or external command operable program or batch file
    I've installed the AIR runtime v2
    Downloaded the SDK v2 and placed in D:\Www\air
    Modified the path variable with D:\Www\air\bin
    And then i open a new cmd console and simply write adt and gives me that error.
    I've updated to the latest version of Java, but it did solve it.
    But what's strage it's that the adl command work, but i'm not being able to pack my application.
    I'm running Windows 7 on x64 platform.
    Sincerely,
    Alex

    I think the 32bit version will work, but it sounds like you'll need to add the Java bin folder to your system path.  This is usually done by the Java installer, so I'm not sure what failed, did you run the installer located at www.java.com?  Either way, this document might be able to help you out:
    How do I set or change the PATH system variable
    Add the Java "bin" folder to your path, you might also need to add the CLASSPATH.
    Please let me know how it goes!

  • LaserJet p1102w not recognized by Toshiba A505 S6005 in WIN 10

    the printer is not found during setup

    This is not a one off, it is repeatable on brand new disks.
    I previously had the original win10 preview build installed on this hard drive = no problems.
    I then did a fresh install of build 9879 from CD. Install completed untill it got to the reboot phase = it would not reboot - the hard drive was not recognized in the bios anymore.
    tested broken hard drive in another computer = works
    tested broken hard drive in 2nd connector on my laptop = fail (still not seen by bios).
    tested a few other sata disks I have laying around on both connectors of my laptop = pass.
    upgrade my bios as there is one version higher than I had. = fail (still not seen by bios).
    boot from broken hard drive on another computer and finish the OOB portion of the win 10 preview install = pass
    So it seems clear that the hard drive is still working, but just not recognized on the original computer. It is only 2 months old so I get it replaced under warranty. Replacement disk is recognized by bios, yeah! I then restore image of broken hard drive
    to this replacement. Disk is still recognized by bios. I boot up from this disk on my laptop. It works OK until first reboot, then is not recognized by bios anymore.
    Computer = Toshiba Satelite P305 PSPC8U-01400Q
    Hard disk = WD blue 1TB  model: WD10JPVX-22JC3T0
    Note: also with windows 8 running on this computer and the broken hard drive installed in second connector, windows also does not see it, neither through disk manager nor through diskpart command line. But if I boot up in Linux from a bootable USB flash
    drive, then I can see the (broken disk) on this same computer. Yes I can see it and I can read and write to the filesystem, even though it is still not seen by the bios. 
    HI
    Disable PUIS (Power-Up In Standby) with HDAT2.EXE  With PenDrive BOOT MS-DOS

  • Flash CS3 Debugger not recognizing keyboard input

    I am trying to debug a piece of code involving a keystroke.
    While debugging, when I hit the key the first time, the breakpoint
    is triggered. But after the breakpoint, the debugger simply ignores
    any other keystrokes. I'm trying to see what happens when the key
    is pressed a second time so you can see why this is frustrating me.
    I'm running Flash CS3 on an intel iMac. The program is
    written in AS3.
    Is this a known issue? Are there any workarounds?
    Thanks in advance!
    Jeremy

    bump

  • Netconnection Debugger not tracing when exporting from Flash 8 with Actionscript 2.0

    Ok, Sorry for the long post, but given my research , I wanted
    to be clear on the problem and what I have done to address it.---
    anyone who has gotten the NetConnection Debugger to work with Flash
    8 and actionscript 2.0 on a PC, your help will be greatly
    appreciated
    When I compile a Flash 8 swf with AS 2.0 the it does not seem
    to import the class properly to utilize the net connection
    debugger.
    I spent a considerable amount of time getting it to work on
    My Mac, but on the PC , none of my calls to the debugger are
    working.
    I have a very simple file that has the following code:
    import mx.remoting.NetServices;
    import mx.remoting.debug.NetDebug;
    NetDebug.initialize();
    NetDebug.trace("I am here")
    I do not get any errors for the imports, and the files are
    where they need to be. ( see the end of the message to see the
    directory structure for both the mac and the pc versions of this)
    When I first installed the remoting components on my
    macintosh, the Net Connection Debugger would not work. I eventually
    took my 2004 Classes and overwrote the mx.remoting.debug folder in
    the
    usr/Library/Application Support/Macromedia/Flash
    8/en/Configuration/Classes/mx/
    then after restarting flash and the debugger.swf.. it worked
    on the mac.
    I have tried the same thing on the PC on three separate
    machines.
    The latest PC is a brand new clean machine.
    These are the steps I have followed:
    I installed Flash 8 professional
    I installed the remoting components
    I created a test file with the code from above
    I opened the debugger
    I exported the file, ............... nothing traced
    I then copied the as Class files from my mac and overwrote
    the files in the classes directory for mx.remoting.debug
    in both these directories.
    c:\Documents and Settings\user\Local Settings\Application
    Data\Macromedia\Flash 8\en\Configuration\Classes\mx\
    and in c:\Program Files\Macromedia\Flash 8\en\First
    Run\Classes\mx\remoting.
    After a restart of flash and the debugger I am still not
    getting a trace out... I am at a loss. I need this to work, and
    someone has to have run into this before.
    Here is a list of the files in mx\remoting directories on the
    Mac and the PC.
    Mac
    Connection.as
    DataGlue.as
    debug //this is the folder
    ----- commands//this is a folder
    ----- events //this is a folder
    ----- connectionMixin.as
    -----GlobalLocalConnection.as
    ----- NetDebug.as
    ----- NetDebugConfig.as
    ----- NetDebugResponseProxy.as
    NetServiceProxy.as
    NetServiceProxyResponder.as
    NetService.as
    Operation.as
    PendingCall.as
    RecordSet.as
    RecordSetIterator.as
    RemotingComponentVersion.as
    RsDataFetcher.as
    RsDataRange.as
    RTMPClientResponse.as
    Service.as
    PC in the Documents and
    Settings...............\classes\mx\remoting
    Connection.as
    DataGlue.as
    debug //this is the folder
    ----- commands//this is a folder
    ----- events //this is a folder
    ----- connectionMixin.as
    -----GlobalLocalConnection.as
    ----- NetDebug.as
    ----- NetDebugConfig.as
    ----- NetDebugResponseProxy.as
    NetServiceProxy.as
    NetServiceProxyResponder.as
    NetService.as
    Operation.as
    PendingCall.as
    RecordSet.as
    RecordSetIterator.as
    RemotingComponentVersion.as
    RsDataFetcher.as
    RsDataRange.as
    RTMPClientResponse.as
    Service.as
    thanks for the help
    allen hujsak

    Thank you for the advice. This is still the error I get even
    with those two components on stage. Do I have to connect them to
    something? I am still trying the same tutorial from
    adobe...www.adobe.com/devnet/flash/articles/delta_packet.html
    Here's the error...
    **Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 1: Error
    opening include file NetServices.as: File not found.
    #include "NetServices.as"
    **Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 2: Error
    opening include file NetDebug.as: File not found.
    #include "NetDebug.as"
    Total ActionScript Errors: 2 Reported Errors: 2
    Please help!!!!!!

  • Canon MX922 Not Recognized as Scanner in Photoshop CS5

    I am using Photoshop CS5 on a 64bit Windows 8.1 Machine. My All in one printer/scanner Canon Pixma MX922 is a wireless model and is not showing up as a scanner under Import. I have not had this issue with any canon all in one before

    TWAIN scanner drivers are still supported in Photoshop CS5, but the TWAIN support plugin is no longer installed by default.
    You need to do the following:
    • Go to the Adobe website. In the Download section, look for Photoshop CS5 updates.
    • Download the "Photoshop CS5 12 Optional plugins" file for your language version of Photoshop.
    • Once the download is complete, double-click the "CS5Optional_PlugInsInstaller.dmg" file.
    • Double-click the file "CS5 Optional Plug-Ins.mxp". The Adobe Extensions Manager will launch and the install process will start.
    • When it is finished, quit the Adobe Extensions manager.
    • Launch Photoshop CS5.
    If the scanner driver is still not visible in the Import menu, your scanner driver may not be 64bit compatible. In this case:
    • Right-click on the Photoshop CS5 application icon and select "Get Info".
    • In the information window, check the box that says "Run in 32 bit mode".
    This solved the scanner problem for me.

  • PC NOT RECOGNIZING THE NOMAD USB FLASH DR

    I've had this muvo tx for nearly three weeks and it worked fine with the pc. All of a sudden, the pc is not picking up the flash dri've when inserted into the usb. I've tried deinstalling and reinstalling the creative software but it is not working. I have windows 98. Any suggestions?

    Sorry. I gave you misinformation. My PC runs windows 98 SE. I downloaded the drivers and the firmware
    from the Creative web site. Installed the drivers. I inserted the built -in USB Connector of MUVO TX USB flash dri've while pressing the player button. I executed the firmware and the animated flash light turned on but after 2 minutes, the response was no removable dri've is detected. I will make several more attempts before I give up.

  • USB ports not recognizing my Memory/USB/Flash drives

    My macbook, 2 GHz Intel Core 2 duo (if that even helps), with Leopeord 10.5.5 's USB ports stopped working, but the weird thing is, when I plug in my iPod or mouse, they work. But when I plug in my Flash drive to try to open up some homework or SD card drive, anything that contains memory, it doesn't work, the computer shows that it has been plugged into my macbook through System Profiler, it also shows when it's gone, but the drive doesn't show up on my desktop and I can't find it anywhere. I know the flash drives are working because I tested them on different computers, safely removed them as well. Some people on a different forum suggested PRAM and SMC reset, I've done PRAM, but I don't see how it helps. please help! I need to be able to finish hmwk!!
    Message was edited by: AEROpotatoe

    I am having the exact same problem!
    UGH

  • Extension Manager is not recognizing that I have Photshop CS5 Installed.

         Thus I can not install any extensions for Photoahop and this is a problem.  I have the CS5 Master Collection installed and the Extension Manager recognizes all of the other apps, just not the one I currently need.  I have already checked the XManConfig.xml file and it is there and appears glitch free.  I have already invested a significant amount of time into fixing this problem yethave made little progress.  Any help would be greatly appreciated.
    Thanks.

    Im running it on 64 bit Windows 7, The Mastercollection is installed as 32 bit, but oddly enough the version of Photoshop I use most is 64 bit. Though I do have a 32 bit installed as well.  And The extension manager works for the rest of the suite, and it opens without any warning notifications.  The 64 and 32 bit versiond of PS were installed pretty much simultaneously.  (2 min of difference)
    Here is the XManConfig.xml for the 32 bit PS
    <?xml  version="1.0" encoding="UTF-8" ?>
    - <Configuration>
    - <VariableForExMan>
    <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension  Manager</Data>
    <Data key="$photoshopappfolder">$installfolder</Data>
    <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
    <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
    <Data key="$platform">Win</Data>
    <Data key="$actions">$presetsfolder/Actions</Data>
    <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
    <Data key="$brushes">$presetsfolder/Brushes</Data>
    <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
    <Data key="$colorbooks">$presetsfolder/Color Books</Data>
    <Data key="$colorrange">$presetsfolder/Color Range</Data>
    <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
    <Data key="$contours">$presetsfolder/Contours</Data>
    <Data key="$curves">$presetsfolder/Curves</Data>
    <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
    <Data key="$duotones">$presetsfolder/Duotones</Data>
    <Data key="$exposure">$presetsfolder/Exposure</Data>
    <Data key="$gradients">$presetsfolder/Gradients</Data>
    <Data key="$huesat">$presetsfolder/Hue Sat</Data>
    <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
    <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
    <Data key="$layouts">$presetsfolder/Layouts</Data>
    <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
    <Data key="$levels">$presetsfolder/Levels</Data>
    <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
    <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
    <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
    <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output  Settings</Data>
    <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
    <Data key="$patterns">$presetsfolder/Patterns</Data>
    <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
    <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
    <Data key="$scripts">$presetsfolder/Scripts</Data>
    <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
    <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
    <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
    <Data key="$styles">$presetsfolder/Styles</Data>
    <Data key="$textures">$presetsfolder/Textures</Data>
    <Data key="$tools">$presetsfolder/Tools</Data>
    <Data key="$variations">$presetsfolder/Variations</Data>
    <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
    <Data key="$workspaces">$presetsfolder/Workspaces</Data>
    <Data key="$zoomify">$presetsfolder/Zoomify</Data>
    <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
    <Data key="$lights">$presetsfolder/Lights</Data>
    <Data key="$materials">$presetsfolder/Materials</Data>
    <Data key="$meshes">$presetsfolder/Meshes</Data>
    <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
    <Data key="$volumes">$presetsfolder/Volumes</Data>
    <Data key="$widgets">$presetsfolder/Widgets</Data>
    <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
    <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional  Plug-ins</Data>
    <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional  Presets</Data>
    <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional  Presets/$platform/Keyboard Shortcuts</Data>
    <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional  Presets/$platform/Menu Customization</Data>
    <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional  Presets/$platform/Workspaces</Data>
    <Data key="$automate">$pluginsfolder/Automate</Data>
    <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
    <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
    <Data key="$effects">$pluginsfolder/Effects</Data>
    <Data key="$extensions">$pluginsfolder/Extensions</Data>
    <Data key="$fileformats">$pluginsfolder/File Formats</Data>
    <Data key="$filters">$pluginsfolder/Filters</Data>
    <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
    <Data key="$importexport">$pluginsfolder/Import-Export</Data>
    <Data key="$measurements">$pluginsfolder/Measurements</Data>
    <Data key="$panels">$pluginsfolder/Panels</Data>
    <Data key="$parser">$pluginsfolder/Parser</Data>
    <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
    <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting  Styles</Data>
    <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
    <Data key="UserExtensionFolder">$photoshopappfolder</Data>
    <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop  CS5/Configuration</Data>
    <Data key="DisplayName">Photoshop CS5 32</Data>
    <Data key="ProductName">Photoshop32</Data>
    <Data key="FamilyName">Photoshop</Data>
    <Data key="ProductVersion">12.0</Data>
    <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
    <Data key="SupportedInSuite">CS5</Data>
    <Data key="HostNameForCSXS">PHSP</Data>
    <Data key="Bit">32</Data>
    </VariableForExMan>
    </Configuration>
    And here is the XmanConfig.xml for the 64 bit
    <?xml  version="1.0" encoding="UTF-8" ?>
    - <Configuration>
    - <VariableForExMan>
    <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension  Manager</Data>
    <Data key="$photoshopappfolder">$installfolder</Data>
    <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
    <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
    <Data key="$platform">Win</Data>
    <Data key="$actions">$presetsfolder/Actions</Data>
    <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
    <Data key="$brushes">$presetsfolder/Brushes</Data>
    <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
    <Data key="$colorbooks">$presetsfolder/Color Books</Data>
    <Data key="$colorrange">$presetsfolder/Color Range</Data>
    <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
    <Data key="$contours">$presetsfolder/Contours</Data>
    <Data key="$curves">$presetsfolder/Curves</Data>
    <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
    <Data key="$duotones">$presetsfolder/Duotones</Data>
    <Data key="$exposure">$presetsfolder/Exposure</Data>
    <Data key="$gradients">$presetsfolder/Gradients</Data>
    <Data key="$huesat">$presetsfolder/Hue Sat</Data>
    <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
    <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
    <Data key="$layouts">$presetsfolder/Layouts</Data>
    <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
    <Data key="$levels">$presetsfolder/Levels</Data>
    <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
    <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
    <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
    <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output  Settings</Data>
    <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
    <Data key="$patterns">$presetsfolder/Patterns</Data>
    <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
    <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
    <Data key="$scripts">$presetsfolder/Scripts</Data>
    <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
    <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
    <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
    <Data key="$styles">$presetsfolder/Styles</Data>
    <Data key="$textures">$presetsfolder/Textures</Data>
    <Data key="$tools">$presetsfolder/Tools</Data>
    <Data key="$variations">$presetsfolder/Variations</Data>
    <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
    <Data key="$workspaces">$presetsfolder/Workspaces</Data>
    <Data key="$zoomify">$presetsfolder/Zoomify</Data>
    <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
    <Data key="$lights">$presetsfolder/Lights</Data>
    <Data key="$materials">$presetsfolder/Materials</Data>
    <Data key="$meshes">$presetsfolder/Meshes</Data>
    <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
    <Data key="$volumes">$presetsfolder/Volumes</Data>
    <Data key="$widgets">$presetsfolder/Widgets</Data>
    <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
    <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional  Plug-ins</Data>
    <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional  Presets</Data>
    <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional  Presets/$platform/Keyboard Shortcuts</Data>
    <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional  Presets/$platform/Menu Customization</Data>
    <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional  Presets/$platform/Workspaces</Data>
    <Data key="$automate">$pluginsfolder/Automate</Data>
    <Data key="$digimarc">$pluginsfolder/Digimarc</Data

  • Time capsule not recognized by airport extreme - first time setup challenge

    Air port utility not recognizing time capsule. We have airport extreme and time capsule (recent purchase to back up 2 wireless mac laptops and the G5 which is connected to the modem). Modem is conected to airport extreme and I connected the Time capsule via ethernet as I thought the speed would be 1GB and faster than wireless "n." Somehow now the airport extreme does not recognize the time capsule. In the network utility, airport is not listed, only ethernet and firewire. What steps should I take to enable time capsule to back up the laptops wirelessly as well as the G5 (non-wireless.) Thanks!

    I would hold the reset button on the back of the Time Capsule for 5-10 seconds and I would wait to connect it to the AirPort Extreme to see if you can set it up. If you can access the Time Capsule with AirPort Utility then I would plug it into the AirPort Extreme and continue your setup.

  • Why are my plug-ins not recognized by Photoshop CS5?

    Hello,
    It seems my plug-ins are not recognized at all by Photoshop CS5:
    - Imagenomic
    - Photokit Sharpener
    - Photomatix
    and even the - Optional Plug-ins given by Adobe are not working
    I get a panel that says:
    "could not complete your request because Photoshop doesn't recognize this type of file"
    Am I doing something wrong?
    The plug-ins are in:
    Applications>Adobe Photoshop CS5>Plug-ins>Automate>PK Sharpener
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Optional Plug-Ins
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Imagenomic
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Filters>Tone Mapping
    Thanks for your help!
    Emilie

    sorry I've found the answer... not running in 32 bits... What a shame...

  • TS1591 Iphone 5 and Ipad 4 were not recognized by computers and itunes, cant sync since update software. HELP PLEASE

    I have an Iphone 5 64gb and an Ipad 4 with Retina Display and both are not recognized by Itunes 11 run in Win 8 pro 64bit.
    I have uninstalled and reinstalled itunes 3 times, reseted my devices for many times, changes different cable but everytime I plug my devices in, a small message appear on devices screen ask whether to trust my computer which has been authorised by me via itunes.
    I dont know what is the problem here and seeking support from apple community. If anyone have experienced the same issue please share with me your solutions, it would be greatly appreciated.
    many thanks.

    Hello Mr. Mai,
    I would be concerned as well if my iPhone and iPad were not recognized by iTunes.  Thank you for providing all the information with the steps you took in regards to this issue.  I found an article with a few more steps you can take (you can skip the steps you have already taken):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPHONE 4 NOT RECOGNIZED BY MACBOOK AIR

    I recently rebooted my iPhone 4 and also updated my macbook air to the latest software update. Now, my iPhone is not recognised by my mac and by my iTunes .I've tried restarting and ect. What can i do?

    iOS: Device not recognized in iTunes for OS X - Apple Support

  • My iphone 5s is not recognized by itunes on my new Macbook Air.

    I just bought a Macbook Air.  I previously owned a Macbook Pro.  I am attempting to transfer all of my photos and music to my new Air.  Photos were no problem, music was a breeze using Home Sharing.  However, my iphone 5s is not recognized by itunes on my new Air.  Any suggestions?

    Hello crystal251,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Have a nice day,
    Mario

Maybe you are looking for