AIR on Android can't connect using SSL

I'm trying to connect to a Java server using SSL, with a signed and trusted certificate, but keep getting InvalidCertificate error.
Everything is fine with the certificate, but the error happens when connecting through android AIR app.
Connection works fine when connecting without SSL, but that is not an option.
What may be wrong?

More info:
Renaming the cert8.db didn't change anything.
I get into these ILO interfaces fairly often and I can say that Firefox had a problem over a year ago (or so) where it would let you in once and then say (IIRC) Invalid Cookie on subsequent attempts. Maybe deleting the cert8.db would fix that. Anyway, an update fixed that issue.
I just tested with Firefox 17 and it worked fine. Here are screen shots and the .cer file I exported. This is from a different (virgin) server at .93
https://www.dropbox.com/l/gGYGz2myJnUu9uNoPwsYxd
(Hope this works -- I'm new to DropBox)
IE says:
The security certificate presented by this website was not issued by a trusted certificate authority.
The security certificate presented by this website was issued for a different website's address.
I didn't generate the certificate; the come pre-generated by HP. Anyway, I tried re-generating the certificate and I now get this error:
Secure Connection Failed
An error occurred during a connection to 10.1.20.91. You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number. (Error code: sec_error_reused_issuer_and_serial)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
I tried to attach the exported certificate, but I seem to only be allowed to upload graphical images.
IE Key Usage says: Certificate Signing, Off-line CRL Signing, CRL Signing (06)

Similar Messages

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

I can't link my iPhone 4S to my iPad air. I can't connect to a personal hotspot or Bluetooth link them! Any ideas?

I can't link my iPhone 4S to my iPad air. I can't connect to a personal hotspot or Bluetooth link them! Any ideas?
In settings under mobile (cellular) I've turned on mobile data, 3G and data roaming.
Under mobile (cellular) data network APN details are filled in and I have tried reset settings all ready.
What I'd like to do is link the two devices so I can use my phone's 3G on my iPad.
I can't get either device to connect via Bluetooth with each other!
Any help would be greatly appreciated!

Hello Hollystorm1
Check out the article below to setup your personal hotspot on your iPhone. Check with your carrier to ensure that is a feature that you can do with your iPhone.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
Regards,
-Norm G.

When I try to set up my Optimum account email I get a message saying Cannot Connect Using SSL.

When I try to set up my Optimum email account I get an error message saying Cannot Connect Using SSL.

What mail provider is it?
Have you Googled for: setup XXX email on iPhone
where xxx is the provider
You can try going to Mail>the accounts>Advanced and turn Use SSL on or off, the opposite of what it is now.

New gmail account on iPhone cannot connect using SSL

Hi,
I was having problems accessing the gmail server on my iphone so i deleted the account settings on the iphone and am creating a new one. However, the iphone tells me that it cannot connect using SSL. Has anyone had a similar problem? I don't want to setup the account without this basic security.

Hey milos321,
I'm not sure what caused the issue. I believe account may have been automatically locked because abnormal activity.
You can find more detailed information here:
http://mail.google.com/support/bin/answer.py?answer=61805
http://mail.google.com/support/
Jason

HT201320 when trying to set up my email account, i enter add account tap in my details for my virgin media email account, after going through the veryfying, it comes back with cannot connect using ssl.

when trying to set up my personal email account, following the on screen instructions, it comes back with CANNOT CONNECT USING SSL, do you want to try setting up the account without ssl? Yes or No

Since Thunderbird does not run on iPads, what does this have to do with Thunderbird?

Im trying to set up email on my iphone4 and it is saying "cannot connect using SSL" what does this mean?? what am i doing wrong because i cannot set up email??

how do i set up email on my iphone??? it says "cannot connect using ssl" whats this mean, i cant recieve or send emails coz of this

Try just choosing yes when it says that. And yes if you get it a second time. Lots of mail providers don't use SSL.

HT201320 I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???

I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???

Some of the following may help:
How to enable imap: https://support.google.com/mail/troubleshooter/1668960?rd=1
For your username, did you enter the full name including "@gmail.com"
Do you have gMail 2-step verification turned on? If so, you need to use an application-specifc password instead of your normal password if using a mail app: https://support.google.com/mail/answer/1173270?hl=en

HT201320 having problems setting up email for a tiscali email address - after trying to verify ipda comes up saying cannot connect using SSL

trying to set up my tiscali email address on an ipad mini, after trying to verify, message comes up stating "cannot connect using SSL"

Not sure what the shortcut is. I'm just going, Settings > Mail > Add Account > Gmail
That is the GMail shortcut. That should work. Just for testing, use the "Other" shortcut.
Settings / Mail / Add Account / Other
Name: <put your name>
Email [email protected]
Incoming server: pop.gmail.com
Login: [email protected]
Password: yourpassword
Outgoing server: smtp.gmail.com
Login: [email protected]
Password: yourpassword
Hit SAVE.
It should set itself up correctly without you having to specify anything else. Try that.

HT201320 When i try to set up my mail account and get to save/verifying - I get a notice saying Cannot Connect Using SSl-

When i try to set up my mail acct. and get6 to save/verifying - I get a notice saying Cannot connect to SSL.

What mail provider is it?
Have you Googled for: setup XXX email on iPhone
where xxx is the provider
You can try going to Mail>the accounts>Advanced and turn Use SSL on or off, the opposite of what it is now.

E3000 - WVC210 Cam - Can't Connect Using IP Address

I've searched here and on portforward.com and have read all FAQ's for a solution to my problem with now luck. Prior to contacting Tech Support via telephone thought that I'd try a post here first.
I've had a Linksys WVC54GCA IP Camera running through my E3000 wireless router with zero issues for quite some time. I just added a Cisco WVC210 PTZ IP Cam. My setup went flawlessly and both cameras are operatng independently of one and other and I am able to view both cameras using my DYNDNS.com supplied Web Host URL's away from home and both camera's are working great on my iPhone 3GS.
I have assigned fixed IP addresses to both camera's. 192.168.1.200 for the the WVC54GCA and 192.168.1.201 for the WVC210. I have setup the Port Range Forward as follows:
Cam1 80 to 80 Both 192.168.200
Cam1 1024 to 1024 Both 192.168.1.200
Cam2 1025 to 1025 Both 192.168.1.201
Here's the thing I don't understand. Again, both cams do what they're supposed to, except; on my home network I can connect directly to the older WVC54GCA using its 192.168.1.200 fixed ip address. I CAN NOT connect directly to the new WVC210 using its fixed ip address of 192.168.1.201. I get an IE error.
I have a feeling that there's something I'm not doing on the router or it has something to do with being on port 1025. Any help would be greatly appreciated.

I don't think there is any issue with the port 1025 for the second camera.
The port 1025 will be used to see the camera from outside.
If you are able to see both the cameras from out side that means both the cameras are configured properly and working fine.
What error message do you get when you try to see the camera using the IP address of the camera?
Try using another browser and check if you can see the camera in the network.
Try to ping the IP address of the camera. if you get replies from the camera IP address then your computer is able to communicate with the camera.
What is the operating system on your computer?

Connecting Using SSL Authentication Without Username and Password

Hi,
We're on RedHat Linux 4.0 using 10.2.0.3 (server/client). We're trying to figure out a way to connect to the database using instantclient and JDBC-OCI and SSL authentication without using a username or password. According to the documentation this should be possible but no sample code is given.
LD_LIBRARY_PATH is set /opt/app/oracle/product/10.2.0/db_1/lib:/usr/lib:/home/oracle/instantclient where the instantclient was installed from the 10.2.0.1 client software
and we are using JDK version 1.6.0_03.
We're also referencing the following paper:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/pdf/wp-oracle-jdbc_thin_ssl_2007.pdf
We've got our client and server wallets configured and the sample code we tried looks like this:
import java.sql.*;
import java.sql.*;
import java.io.*;
import java.util.*;
import oracle.net.ns.*;
import oracle.net.ano.*;
import oracle.jdbc.*;
import oracle.jdbc.pool.*;
import java.security.*;
import oracle.jdbc.pool.OracleDataSource;
public static void main(String[] argv) throws Exception {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Security.addProvider(new oracle.security.pki.OraclePKIProvider());
System.setProperty("oracle.net.tns_admin", "/opt/app/oracle/product/10.2.0/db_1/network/admin");
String url = "jdbc:oracle:thin:@orcl";
java.util.Properties props = new java.util.Properties();
props.setProperty("oracle.net.authentication_services","(TCPS)");
props.setProperty("javax.net.ssl.trustStore",
"/opt/app/oracle/product/10.2.0/db_1/admin/wallet/server/cwallet.sso");
props.setProperty("javax.net.ssl.trustStoreType","SSO");
props.setProperty("javax.net.ssl.keyStore", "/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client/cwallet.sso");
props.setProperty("javax.net.ssl.keyStoreType","SSO");
props.put ("oracle.net.ssl_version","3.0");
props.put ("oracle.net.wallet_location", "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client)))");
System.out.println("At Here...");
OracleDataSource ods = new OracleDataSource();
//ods.setUser("scott");
//ods.setPassword("tiger");
ods.setURL(url);
ods.setConnectionProperties(props);
System.out.println("At Here1...");
Connection conn = ods.getConnection();
System.out.println("At Here2...");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select 'Hello Thin driver SSL "
+ "tester ' from dual");
while (rset.next())
System.out.println(rset.getString(1));
rset.close();
stmt.close();
conn.close();
When this code is compiled and run, the following error is thrown:
Exception in thread "main" java.sql.SQLException: invalid arguments in call
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
If a username and password is supplied, the code works. So does anyone have a working of using SSL to authenticate without supplying username/password?
Thanks
mohammed

Hi,
I just solved this. I noticed from another thread that I was not using the OCI driver (see below):
String url = "jdbc:oracle:thin:@pki14";
Once I changed it to:
String url = "jdbc:oracle:oci:@pki14";
The code worked perfectly. One more setting that you'll have to do is to create the user you want to connect as externally:
create user scott identified externally as
'CN=acme, OU=development, O=acme, C=US';
grant connect,create session to scott;
Note that the DN should be the same as the SSL certificate that you created in your wallet.
hth
mohammed

Wlc 5508: windows 8 can't connect using wpa+wpa2

Dear All,
I need your help.
My customer have Cisco WLC 5508 (cisco wlc 7.0.116.0) .
We create ssid with layer 2 security wpa+wpa2.
Using Windows 8, it's can't connect to the wireless lan.
But if I change, the ssid, with layer 2 security wep.
It can connect / connected.
Please help.
Thanks,
Jerri

This is a known issue with Windows 8. You need to upgrade your firmware to 7.0.250.X for wireless clients running Win8.
Another thing, choose one: Either WPA or WPA2. Don't enable one and "hope" the wireless client will make the choice because most of the time, they won't.

HANA Studio connect using SSL

Hi ,
I configured SSL in Hana server using Snote 1718944 and configured the JDBC settings using Security Guide "4.3.1.1 Server-Side SSL Configuration for ODBC/JDBC Client Access" and "4.3.1.3 Configuring SSL for SAP HANA Studio Connections" . while conmecting to database using SSL , getting below JDBC trace :
Thread 15490f81 Thread-209 Timestamp: 2014-04-04 15:01:30.637
new Connection 'jdbc:sap://16.184.47.138:31015'
locale=en_US
user=SYSTEM
password=***
timeout=0
reconnect=true
validateCertificate=true
encrypt=true
new RTEException: -813 Cannot connect to host 16.184.47.138:31015 [Connection reset], -813.
whereAmIjava.lang.Throwable
    at com.sap.db.util.Tracer.whereAmI(Tracer.java:352)
    at com.sap.db.rte.comm.RTEException.<init>(RTEException.java:66)
    at com.sap.db.rte.comm.SecureCommunication.openSocketIntern(SecureCommunication.java:793)
    at com.sap.db.rte.comm.SecureCommunication.openSocket(SecureCommunication.java:512)
    at com.sap.db.rte.comm.SecureCommunication.<init>(SecureCommunication.java:99)
    at com.sap.db.rte.comm.SecureCommunication.<init>(SecureCommunication.java:55)
    at com.sap.db.rte.comm.SecureCommunication$1.open(SecureCommunication.java:60)
    at com.sap.db.jdbc.topology.Topology.getSession(Topology.java:145)
    at com.sap.db.jdbc.Driver.openByURL(Driver.java:1019)
    at com.sap.db.jdbc.Driver.connect(Driver.java:230)
    at com.sap.ndb.studio.jdbc.JDBCConnection$1.run(JDBCConnection.java:153)
using null
=> FAILED
please guide
Regards,
Siva

Hi,
i have one doubt here..
please provide the procedure to do the below activity ..
Using the keytool command line tool, import the trust store file that contains the server root certificate into either the Java keystore or your personal user keystore
i used below commnd, is it right???
keytool -import -trustcacerts -alias root -file getCert.cer -keystore keystore.jks
Regards,
Siva

HT201301 how can I connect using wifi?

Using app called "Its Playing"- How can I connect to Pc using wifi?

Just want do you want to do via wifi?
The app is a video player the can use airplay, TV out.

AIR on Android can't connect using SSL

Similar Messages

Maybe you are looking for