AIR Simulator Controller wont display all of the stage when the app has  a resolution for a retina i

Hi,
We are working on an iPad mobile app. When we test it as just a swf in Flash Pro, we can go to View -> Magnification -> Show All and all of the content is scaled down and displayed. But when testing in the Simulator Controller we can not do this and so we can not preview all of the content and test all of the UI. What is the best way to test gestures for retina displays?
Thanks!

The answer is likely to be fast packaging USB testing on the iPad itself. The simulator is the 'perfect' environment. Testing on a real device will show you gestures feel a little different as well as the real speed their events fire at. This changes a bit iPad3 to iPad4 as well and with double the performance speculated on the iPad5 with the A7 chip you can bet that will change yet again.
Otherwise, for testing, you could 'stub' your app if you make no references to 'root'. set the stub stage to the largest size your monitor will allow you to test on. Load in your apps real SWF and set the size however small you need it.
Otherwise the obvious of course, get a bigger monitor

Similar Messages

  • How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

    I like the bookmarks on the left side of the screen. I don't want to be navigating through a tree of all of my various bookmarks. How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

    View > Sidebar > Bookmarks (Ctrl+B)
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
    *https://support.mozilla.com/kb/how-do-i-use-bookmarks

  • Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    this is similar to your question.just go-through it or if you stuck then reply back for more info on this problem : https://support.mozilla.org/en-US/questions/974711

  • I created a book and tried to place order but failed.  I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up.  There was no error message all along when I created the book.

    I created a book and tried to place order but failed.  I followed the procedures, when the book completed uploading, the message "An error occured uploading  your order" appeard.  There was no error message all along when I created the book. I tried several time but failed.

    preview the order and try again - http://support.apple.com/kb/HT1040
    If it still does not work boot into Safe Mode, preview again and try
    With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
    LN

  • My cousin told me there was a way to get free apps and that he could do it but what he really did was try to refund all my apps, the apps are gone from the history but no money has come back for me to even get the apps back, please help.

    My cousin told me there was a way to get free apps and that he could do it but what he really did was try to refund all my apps, the apps are gone from the history but no money has come back for me to even get the apps back, is this permanent?

    Yup!!
    Got what you deserved!
    Do not try and rip off or steal from people or companies.
    You have good cousin, there!(sarcasm)

  • Why wont my image boarder light up when the image is hovered over, border is set to 2.

    why wont my image boarder light up when the image is hovered over, border is set to 2.

    Because you have not coded it correctly.  It is difficult for us to tell you where your mistake is without seeing your test page.

  • I don't want to do the recovery thing to my iPhone4, but my iPhone is at the stage in the update where it says to plug it into iTunes, is there some way to get out of this or save all of my data somehow?

    i don't want to do the recovery thing to my iPhone4, but my iPhone is at the stage in the update where it says to plug it into iTunes, is there some way to get out of this or save all of my data somehow?

    What do you mean the "update" says plug it into iTunes? If you have the iTunes logo/USB cord on the screen, it's in recovery mode or needs to be activated. Anything that was on the phone is already gone. You have no choice but to plug it into the computer. Hopefully, you backed it up before you started the update.
    If that's not what you mean, then please explain.
    Apple may or may not be able to fix the lock button for you without replacing the phone entirely. You'll have to take it in and ask.

  • BlackBerry keeps beeping all time - Only beeps when the connection with carrier is active.

    Sirs,
    I have a Curve 8900 with the  4.6.1.133 (platform 4.2.0.85).
    This device keeps beeping every 10 seconds, I have tried remove the battery when the BB was on, waiting for 1 minute, put it again.
    I have looked all configurations.
    I don´t have any idea and want to throw it in the window.
    Any ideas? Hints?
    NEW INFORMATION. The device only keeps beeping if the wireless connection with the carrier is active. If it´s disabled the beeps stops. I´m using Claro in Brazil. 
    Camilo
    Message Edited by camilotelles on 02-28-2009 08:14 AM
    Message Edited by camilotelles on 02-28-2009 08:14 AM
    Solved!
    Go to Solution.

    I have found the solution. This is a bug beetween a software in the SIM Card from the network operator and the BlackBerry device. It´s already solved. I had to follow some steps to enable and disable a specific feature of the network operator and wait for a dialog box to confirm my operation.
    The beeps comes with the dialog box, but the dialog box only apears if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you only hears the beep.
    Camilo

  • I was listening to Audio Books on my iPod Touch in the car when the speed changed to fast forward on all the audio books. How do I correct this?

    I was listening to Audio Books on my iPod Touch while on a motor trip when the speed of the playback suddenly changed to fast forward for all the stored audio books. How can I correct this?

    Actually found this answer in the archives: When the audio book is playing, hold finger on middle of screen until the speed selection message appears and change from 2x to 1x. Thanks for your response though!

  • My ipod i saying this when i try to log into my game center account, the apple id you entered has been disabled for security reasons.

    My ipod is displaying this message when i try to play games on the game center, the apple ID you entered has been disabled for security reasons, what does that meen

    See here: Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    You may need to contact Apple directly.
    http://www.apple.com/contact/
    B-rock

  • Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

    why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
    The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening? 
    Any help would be very appreciated.

    It looks that way..
    "When LabVIEW starts it contacts the service
    locator to removes all services for itself. This request is triggering
    the firewall.This is done in case there were services that were not
    unregistered the last time LabVIEW executed- for example from VIs that
    didn't clean up after themselves"
    This is not yet fixed in LV2009.
    Message Edited by Ray.R on 11-04-2009 12:25 PM

  • How do i put a cover on the album when the album isnt a part of the itunes store?

    How do i put a cover on the album when the album isnt a part of the itunes store?

    fishmore wrote:
    BUT the image didn't actually work and all I ended up with was the word JPEG and a generic image... Any assistance would be appreciated - Thank you.
    Sounds like you copied an icon from the icon spot in a Get Info window for an image file, then pasted that intoo the same spot in the Get Info window for your folder. As you found out, that won't work - unless the image file already has a custom icon, that is.
    Visually, it's hard to tell if an image file has a custom icon, particularly if View Options for a folder (or the desktop) has been set to 'show icon preview' - the OS will use Preview to make an icon for that file 'on the fly', but it does not really exist as far as being a copyable icon.
    For what you want to do, the solution is really very easy.
    Do a Get Info on the image file whose icon you want to copy for your folder. In that Get Info window is a larger depiction of the image about halfway down - double-click that, and it should open in Preview.
    Press Command-A (that's Select All in the Edit menu).
    Press Command-C (that's Copy in the Edit menu).
    Close Preview, close the Get Info window for the image file.
    Open the Get Info window for your folder.
    Select the icon in the upper left by clicking it once - a blue border should appear around it.
    Press Command-V (that's Paste in the Edit menu).
    Close the Get Info window, and you're done.
    Comment - that's a nice way to make unique folder icons, but there is one drawback: how to distinguish visually between a folder with such an icon and an image file.
    One way, old school, is to append the character ƒ to the end of the name you give the folder. That character is easily generated by pressing Option-F and can be a visual indicator that the item is actually a folder and not an image.

  • When I upgraded iOS 7.1 software when a call comes in I can not click the "listen" when the screen is in lock mode

    when I upgraded iOS 7.1 software when a call comes in I can not click the "listen" when the screen is in lock mode

    User troubleshooting steps as outlined in the manual include restart, reset, restore, restore as new. Have you tried any of these? Restart involves powering off your phone and powering back on. Reset involves the following procedure:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • HT2693 Where d i go if the vendor of an app has no webpage and the support link in the app store points to a nonexisting webpage?

    Where d i go if the vendor of an app has no webpage and the support link in the app store points to a nonexisting webpage?
    The app does not work and i paid 12$ for it
    How do i get either supportor my money back
    Thanks
    Juerg

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View My Account (Store > View My Apple ID on iTunes 11) menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • Refuse the access to the users when the data is loading in cube

    Hi Sap Guy's,
    I have a typical requirement from my client side.
    Requirement:
    While loading data in CUBE update we want have the application that refuse the access to the User's by  showing a message u201C The BW cube u2026. is loading please try lateru201D.
    With this scope we have to modify the chain. Set a parameter before start the cube update and reset the parameter when the cube update is ended.
    The query must be modified for checking the parameter value said above and allow the access or not to the cube.
    Kindly propose a suitable solution for the same.
    Thanks In Advance,
    Krishna.

    Hi,
       This is simple. Create a text element in query description and hardcode this with any dummy value (say the cube name). Fill this text element during i_step = 1 in exit. Use this text element for all the queries on the cube foor which you want this popup message. Then in TVARV table create a field as flag. Before the cube is loaded mark this flag field as X using ABAP program in process chain and once the cube is loaded delete the X for the field. In the exit check in I_STEP = 3 check whether your text element is populated or not. If it is populated this means your query is getting executed. Then check whether your flag field is X or not. If it is X then using the FM raise a popup message RRMS_MESSAGE_HANDLING and after this use the statement raise no_processing. This will return you to selection screen.
      Search the forum for more info abt how to write the code in I_STEP = 3.
    Regards,
    Raghavendra.

Maybe you are looking for