Airport extreme ac can't load Facebook app contents

I have the latest airport extreme for a few months, for some reason I don't know why its having trouble to load my facebook app content i.e. news feed, recent post, pictures etc it doesn't load sometime (4-5 times a day) I need to turn my iPhone/iPad wifi on/off to have it work again. We have 3 iPhone 5s and 2 iPad connected to the airport extreme, other then the facebook app all other apps  have no problem. When I connect my iPhone to another wifi and it can load the facebook app content without any issue. It also work with LTE. I've already tried factory reset many time and updated to the latest firmware.

adds = same for wi-fi and ethernet cable

Similar Messages

  • TS1702 i have an iphone 3gs and i can't load facebook because it says i need os 4.3 or higher but i have 4.2.1

    i have an iphone 3gs and i can't load facebook because it says i need os 4.3 or higher but i have 4.2.1

    If you're using an iPhone 3G, you can't use the current version of that application.
    If you're using an iPhone 3GS, connect it to iTunes on a computer and update it.
    (70098)

  • After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

    After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

    Hi,
    Try this select to check backup history:
    Select 
    r1.database_name, 
    r1.name, 
    (case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType, 
    r3.physical_device_name, 
    r1.backup_start_date, 
    r1.backup_finish_date, 
    r1.backup_size, 
    r1.compressed_backup_size, 
    r2.is_compressed,
    r1.server_name, 
    r1.first_lsn, 
    r1.last_lsn 
    from msdb.dbo.backupset r1 
    inner join [msdb].[dbo].[backupmediaset] r2
    on r1.media_set_id = r2.media_set_id
    inner join [msdb].[dbo].[backupmediafamily] r3
    on r1.media_set_id = r3.media_set_id

  • On ios6 can i delete facebook App?

    on ios6 can i delete facebook App?
    I don't use facebook

    Sure. Just hold your finger on it until it wiggles, and then tap the X in the top left corner.

  • Can't load any apps

    Can't load any apps!

    You need to provide more info about your problem.
    Do downloaded apps fron the iTunes store get stuck in waiting mode?
    Or can't you open apps?
    Or ......?
     Cheers, Tom

  • HT3577 iPhone 3G, can't download facebook app it's asking for ios5 upgrade, what should I do?

    iPhone 3G, can't download facebook app it's asking for ios5 upgrade, what should I do?

    I've got it working on mine by downloading the old facebook app version 4.0.1 from the following link. In iTunes, go to file menu, select add file to library and add the downloaded ipa file and facebook will appear in the apps screen. next sync will then put facebook on your iphone 3G.
    http://runamux.net/search/view/mobile/PPMyzIYl/Facebook_v401.ipa.html

  • My iphone can't load facebook "news feed" when connect wifi but when connect 3G it load normal . can't connect all phone . pleas help me

    My iphone can't load facebook "news feed" when connect wifi but when connect 3G it load normal . can't connect all phone . pleas help me

    Hi, Shadiamond Murray.  
    Thank you for visiting Apple Support Communities. 
    Sometimes a simple power cycle of the router can correct the issue that you are experiencing.  However, the issue could be a little more complex.  Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology.  Below, I have included two articles.  The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection.  The second article cover the recommended settings for current Wi-Fi access points.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Cheers,
    Jason H.

  • How can I delete Facebook app

    How can I delete facebook app from ipad?

    I tried updating 20 apps at once on my iPad.. the Facebook app is stuck on "waiting" and is darker in color.
    It will not show me the little "x" when I press an hold the app.
    I deleted the Facebook app from iTunes on my iMac and my iPod but still cannot get it off my iPad.
    I tried several suggestions but nothing works yet.
    Any suggestions.? Be much appreciated..Thank you.

  • Can't get Facebook App to work on Bold 9700

    I have used the Facebook app on my Bold 9700 the past couple of years.  Recently, after an upgrade of the Facebook app, I can no longer get Facebook to work on my phone.  I have installed and uninstalled the app numerous times.  I have done many hard boots by pulling my battery.  Nothing I try seems to work.
    When I go to options>applications>add ons it shows that the Facebook app is downloaded onto my phone, but the Facebook application has disappeared from my Applications folder.  If I uninstall Facebook, the Facebook app icon re-appears into the Applications folder.  When I install the app again, it disappears from the Applications folder once again.
    If I go to Blackberry World>My World.....Facebook shows as being uninstalled.  If I click on just about anything in My World.....my phone crashes and has to reboot.
    Some serious glitch going on.  Is this my phone only or is anyone else having troubles with Facebook and My World after recent upgrades?  Facebook is about the only app I use frequently and I would hate to not be able to use it ever again on my phone.

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-ho​w-reload-operating-system-nuked-blackberry
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After resetting my Airport Extreme, I can't get it to work! Please help!

    Hey everyone!
    I have an airport extreme base station (wireless n-gigabit ethernet) and awhile ago it stopped working on me. I simply reset my aebs and whenever I open airport utility and try and configure my aebs, it tells me I have an error and can't connect to the aebs. I have comcast internet service and my aebs is connected to my router. It's been working successfully for about a couple months and now it's stopped working. : (
    I've tried this both in manual setup and the regular setup. I've gone through the trouble of doing a hard reset (pressing the reset button until it flashes amber), I've unplugged the power while holding the reset button, connecting my laptop with the aebs via ethernet, making sure everything is updated (and it is), resetting the router, and even reinstalled my airport utility disk.
    Please help! Any suggestions would be greatly appreciated!

    I also tried setting up my aebs on my neighbor's internet and it worked like a charm! Setting up aebs was as easy as when it first worked. Now if only I can get it to work on my internet...

  • How can I set up a WD My Cloud with my Airport Extreme - I can't get it to open ports 80 and 443?

    For remote internet access to the WD My Cloud Mirror, I have been advised that ports 80 and 443 must be open in order to reach the WDMyCloudMirror.  My Motorola Gateway (Surfboard SB6141) is connected directly to my Airport Extreme (WAN port) which is in turn connected to the WDMyCloudMirror (all by ethernet cables).  I do not have FULL instructions on how to properly manually configure the Airport Extreme to open the ports.  I have tried an earlier posting which provides many of the steps, but not all of the required information is included (how to determinge the IP address to be assigned, etc.).  I did the best I could with the information given, but the test using "YouGetSignal" showed the ports as still closed and attemps to reach the WDMyCloudMirror by the internet failed as well (of course).  The WDMyCloudMirror has enough Apple "stuff" included in it (software, I suspect) that an Apple legal acceptance is required for its set-up, yet Western Digital Tecnical Support is unable (or unwilling?) to help with this aspect of its configuration required to work within the Airport Extreme environment.  I have returned the WD My Cloud Mirror to Amazon as "not able to work", but I have not given up the hope that I can eventually get the ports open so that I can get this cloud device, or one similar, to permit remote internet access.

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • I can't find my ID and Password information for my AirPort Extreme, How can I recover or re-set with a new ID

    I have mis-placed my note that has the user ID and password to update my AirPort Extreme Wi-Fi. How can I recover or replace this information?

    Follow the instructions for a Soft Reset in this Apple Support document:
    Resetting an AirPort Base Station or Time Capsule FAQ

  • I have two ipad2's how can i load purchased apps to each ipad2 from the same itunes library?

    I have two iPad2's and I wish to load purchased apps from our iTunes library to our newest iPad2.  Can anyone direct me and or provide steps in completing this process?
    Thank you.
    texasboytn

    delete/uninstall the apps that your relative downloaded on you iPad. to do that tap and hold on and icon til it shakes, once its shaking downloaded apps will havee (X) mark on them on a red bubble, tap on it to delete

  • I have linked my seagate hard drive to my airport extreme but can not seem to find it in finder any ideas

    Hi Help Please
    i have just linked an external hard drive to my airport extreme but it does not seem to appear in finder under shared !!!! any ideas

    i have plugged the hard drive into a usb router which in turn is plugged to to the AEBS it is visible in airport utility but then can not find it anywhere else!!
    First, the drive must be formatted correctly to work at the USB port of the AEBS. That means a format of Mac OS Extended (Journaled) or FAT32. NTFS will not work.
    You need to have a powered USB hub, even if the hard drive has its own power supply
    Next, you may not have configured the Finder Preferences to display a connected hard drive. Please follow these steps:
    o Click anywhere on the open desktop so that the Finder menus appear at the top of the screen
    o Click Finder, then click Preferences
    o Click the General tab
    o Under the heading of "Show these itmes on the desktop", make sure you have a check mark next to Connected Servers
    Restart both the AirPort Extreme and your Mac
    Open Finder and check under the SHARED heading for your AirPort Extreme icon
    Click on your AirPort Extreme and a folder will appear in the window to the right representing your hard drive
    Double click the folder to mount the drive on the desktop
    Hopefully, you are not planning to try to backup files using the Time Machine application, as this is not supported by Apple.

  • How do I put AirPort Extreme in bridging mode from iOS app?

    I need to put my AirPort Extreme into bridging mode. I've searched here and the Net and can only find how to do it from a Mac. Can someone please tell me how to do it from the iOS AirPort Utility? This is a Windows and iOS device only network. I do not have any Macs and the Windows version of the utility so far only supports the Express.

    Thanks for the response, although I was a bit crestfallen at first, since I had already got that far but could not change the Router Mode. Your response did let me know I was indeed on the right path so I started thinking about what else might need to be changed. I finally figured out that before selecting "Advanced" you need to:
    Select Internet Connection
    Change from PPPoE to DHCP in the top group of three buttons
    Then continue as you described
    At that point I could change the Router Mode to Off and I'm happily WiFi-ing with my spiff new Apple router. Ah well, that's what I get for not having any Macs

Maybe you are looking for

  • "unable to open project file" (fce icon has transparent sheet behind it??)

    My most recent save of a project keeps coming up as "unable to open project file". I looked in the autosave and its not there either. The icon for this project has what looks to be a transparent sheet over it or behind it. There are stills in the pro

  • Unprinted released purchase orders

    Hello forum, Is there any way from standard SAP (report) to watch, which purchase orders are released but they are NOT printed ? Thanks in advance.

  • Traffice light  in ALV

    hi experts i have itab having a field status and its data ( 'open' , 'complete') pls explain the needed steps to be followed for setting the traffic light in ALV. open --red light complete -- green light. pls, explain me the step by step procedure. t

  • LSMW issues for Sch. Ageement (Transaction VA31)

    Hi ALL, I am trying for the first time to create a LSMW to upload the Scheduling agreement. Could you pl guide me as to how exactly we map the Ship-to-party and Sold-to-party in BVBPAKOM structure? I know that we will need to use Partner Type Field i

  • Custom L&F with Shadow effect for Menus & Tooltips

    Hai friends ! I want to design a custom look and feel with shadow effect for menus and tooltips. Pls help me.... I tried following but.. i) Extended abstract border.... ii)Extends ColorUIResource to support "alpha" iii)setOpaque(false) in installUI()