Airport Extreme and Dell Computer?

I have an Aiport Extreme for my imac G5 and my ibook G4, the G5 is no longer on the airport. I just won a dell computer and was going to set up for my school work. How do I go about using this Airport to get on-line? I am using it right now just plugging into the airport, but cannot use my laptop on-line.
I have comcast cable internet, so it is always on.
sorry to sound so stupid...for I am "Techno challegned"
thanks for any help you can give me!
~mikamouse

Depending on if you have XP with service pack 1 then you need this
http://www.ifelix.co.uk/tech/1010.html
If you have Service pack 2 with XP then you need the one below.
http://www.ifelix.co.uk/tech/1011.html
Compliments of iFelix's Web site.
Don

Similar Messages

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

Using an external hard drive with an airport extreme and HP computer

- I recently bought the airport extreme, and also bought a Seagate external hard drive for my music files. I can see the hard drive on the airport utility but cannot access it or find where to access it. I am using an HP computer with windows 7.
Help please!

The AirPort Extreme cannot share out the attached Seagate USB hard drive if it is formatted in NTFS or ExFat. Please check to see that it is formatted in either FAT32 or HFS+ (Apple format).
If it is already formatted in either of the latter two formats, then verify that the AirPort Utility can properly identify the hard drive by using the AirPort Utility for Windows.
Finally please checkout the following Apple Support article for details on accessing this shared drive from a Windows PC.

Setup Problems with New AirPort Extreme and Dell Desktop XP with ethernet

I have a Dell desktop computer at home with a cisco cable modem connected to Comcast. I am trying to setup a new wireless network using new AirPort extreme so that new iPad can use wireless.
Connections seem to work but when running the AirPort Utility, it doesn't find my base station. The Dell doesn't have wireless. Does the Airport Utility only work via wireless? Or can it work across the ethernet connection?
I'd appreciate anyone's help.
Thanks.

Hello VL Crew. Welcome to the Apple Discussions!
Does the Airport Utility only work via wireless?
No, the AirPort Utility will work whether your computer is connected to the 802.11n AirPort Extreme Base Station (AEBSn) by wire or wireless.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized. I have been on the computer and gone to airport utility and it is simply not showing up at all. What can I do?

I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?

Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible? I have the Airport Express now and it works fine.

Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?

The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme

Airport Extreme and external HDD - cannot be found under Windows (XP/Vista)

Dear All,
I am about to loose it. I have an Airport Extreme (7.4.2), most recent version (802.11n)connected to my cable modem. Attached is a 2TB HFS+ Formated HDD. I have a number of machines. My primary machine is a Dell XPS with Vista and MacDrive installed.
Now: On my AirPort utilities through the Dell the different HDD's connected via USB (I have tried half a dozen) are all visible. They are shared and I have tried all options, e.g. "with Disk Password" etc, tried to give and deny access to guests etc.
I have tried various things incl. switching off the firewall has not been a success either. I am basically ready to buy a Mac now, but I am worried that the problem will persist for all my Windows based PC's.
Who can help with a step to step guide? tried the TCP/IP settings on the XP machine as well (entering the IP address of both Airport Extreme and Express).

Hi!
I've got the same problem as of Friday when I upgraded my Notebook from XP to Windows 7.
It does not recognize the HDD anymore, neither on the Windows7 Notebook nor on 2 different XP- PC's.
I disabled the password functionality and removed the HDD several times, no change.
When I look to the data volumes overview in the system settings, all internal HDD's and the CD partition of the Toshiba drive are shown. The HDD partition of the drive is shown as "non allocated".
Is there any workaround to get access to the data????
Best regards,
Helmut

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Airport Extreme and a Guest House.

Hey all!
I am moving into a guest house and the main house wi-fi coverage is very weak. I was wondering if I could use my Airport Extreme to wirelessly connect to the main house's wifi to boost and re broadcast my own network (ie, using the same name and setting of my current netowrk so I don't have to reconfig all of my devices). Or, do I have to buy the wifi repeater (Apple Espress) and have my Extreme in the main house to get a strong signal?
More info: The main house has Time Warner Cable for internet. The guest house is about 10 feet away form the main house. The Main house resident is using an inexpensive brand router. She only uses it to connect her iPhone in the house.
Thanks!

I was wondering if I could use my Airport Extreme to wirelessly connect to the main house's wifi to boost and re broadcast my own network
The AirPort Extreme could do this only if the main house was also using an Apple wireless router.
Or, do I have to buy the wifi repeater (Apple Espress) and have my Extreme in the main house to get a strong signal?
That might work. See the next question.
The guest house is about 10 feet away form the main house.
Distance is not really the issue that you need to be concerned about. The issue is obstructions in the signal path.
If there are too many walls or other obstructions in the signal path between the AirPort Extreme and AirPort Express, the wireless signal will be absorbed very quickly with the result being that little to no wireless signal will reach the AirPort Express....so there may not be enough signal quality for the AirPort Express to extend.
You can get an idea if this might work by testing using only your AirPort Extreme before you buy an AirPort Express. Hook up the AirPort Extreme in the main house and then see if you can get a wireless connection on your computer in the Guest house.
If you can, the AirPort Express will strengthen that signal effectively. If you cannot get a good signal using only the AirPort Extreme during your test, then adding an AirPort Express will not help.....since it can only extend the quality of signal that it receives.
If that is the case, you need to look at a wired Ethernet connection from the wireless router in the main house to the AirPort router in the Guest house. If you cannot run the Ethernet cable, a pair of Ethernet powerline adapters might work.....IF....the main house and Guest house are on the same master electrical circuit.
It would be a good idea to understand the store's return policy before you purchase any equipment. The reason for this is that you really will not know if things will work until you try.

What cables to use when connecting Airport Extreme and Windows XP?

I have a DSL modem and Airport Extreme. Right now I am getting Internet with the cable plugged into "Ethernet" and is connected to my computer. If I want to connect my Airport Extreme to my computer, where do I plug in everything?
Thank you for your help - I am a complete wireless newbie!

Jgreene19
You don't seem to be making much sense, please can you clarify your network and your computer.
You have a DSL modem with an Ethernet port?
Do you have an Airport Extreme Base Station?
What computer do you want to connect by Airport, your iMac listed in your profile (or as this is an Airport for Windows forum) a Windows PC?
Does this Windows PC have a wireless card or not?

Connecting AirPort Extreme and AirPort Express

Hi, I have a windows 7 pc connected to the internet with a dsl modem/router (technicolor TG587n v3 made by Thomson) and a Mac computer that gets connected wirelessly, but now I have purchased an AirPort Extreme and an AirPort Express and I want to connect the new AirPorts to provide a more stable connection and also to extend the wifi signal and connect a non wifi USB printer to be accessible by the other computers in the household. Would it be possible for someone to spell out all of the steps to be taken to achieve this? Many thanks

No worries. It was all to do with the sequence of events which happened as follows (bear in mind that I'm not a technical person). First of all I've left the original moden/router's connection as it was, then I connected the Airport Extreme to the original modem with an ethernet cable. After this I started Airport Utility and I chose to do a manual setup until it recognised the Extreme, once this was done I plugged the Express to a power point, then Airport Utility recognised the Express and once again I did a manual setup and voila!
The above steps are only a summary of what took place as I did get a little bit confused as the first person that attended to my enquiry was not an expert with creating networks. The second person was amazing knowledgeable.

Airport Extreme and Time Machine. Despite now being officially supported, does it work?

The subject says it all. After purchasing the new tall Airport Extreme and connecting a WD 2TB drive (as I had with the earlier AE) I have yet to have a backup execute properly. It will be fine for a few days then TM will announce it's done a verification and a new backup is required. Thank goodness I have offsite backup since TM is doing absolutely SFA for me at the moment.

Yuri van Hoof wrote:
Now I connected this USB External Disk to the Airport so I can use it as an network disk. This is working as well. I can get it mounted and read and write on it. Nice...so far.
Now I want TIme Machine to update/compleet my latest back-up, and here the problems start.
I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.
But then I got the message; disk is full. Hmm?
Yes, because Time Machine stores backups differently when done over a network, it doesn't see the ones made while directly connected. See the blue box in #17 of Time Machine - Frequently Asked Questions.
Does anybody now how to get the old 'Backups.backupdb' connected ore recognized as the ONE which TM should compleet?
Realistically, you have two choices:
Knowing the considerable risks, as detailed in the first link, if still you want to back up wirelessly, connect the disk to your Mac and erase it. Then connect it to your Airport and let Time Machine start fresh.
To return to backing-up while directly-connected, delete the <Computer Name>.sparsebundle from the top level of the drive.

Airport Extreme and adding a USB Hub

I added a Belkin USB Hub to my airport extreme and with my MAC computer it cannot find anything plugged into it. Is there a recommended Hub to use, mine is Belkin?

Welcome to Apple Support Communities
A USB port of the AirPort Extreme supports a hub, always that you plug printers and displays > http://support.apple.com/kb/HT2421
If devices connected to the hub are not recognized, return it and get another hub. There is no hub recommended as all of them should work, but I recommend you to get a USB 2.0 hub

Windows, Mac Non-wireless Mac, Airport Extreme and Printer

I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
eMac Airport Extreme Cablevision Cable Modem
Printer
The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
If anyone has any advice, I would apreciate them to post back. Check back soon,
thatthaneguy
HP-Compaq nc6220 Windows XP Windows XP Professional

If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
If the VPN is not operating then try these guides.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Airport Extreme and Dell Computer?

Similar Messages

Maybe you are looking for