AirPort Extreme Base Station and Windows Vista and Windows 7

I currently have a Belkin N+ Wireless Router and Belkin N+ USB Adapter Part # F5D8055. If I purchase the Airport Extreme Base Station dual band and replace my current router, will my current usb adapters connect and work with the apple extreme?

Yes.

Similar Messages

Is AirPort Extreme Base Station the right device and reliable for my setup?

hey guys,
i got a 2012 13" macbook air, iphone5 and an 2012 appletv
ive also got two external usb3 2tb powered hdd's that i would to setup towards and use on my network.
i have videos/movies/files/music that i would like to access from the network,
so ive been looking at the extreme device and i can share via sb in the back x1 external hdd.
from what ive googled i can share more devices such as my x2 external hdd's via a powered hub, is that correct?
so my main question is..how fast is the read/copy/write going to be via through a hub?
will it lag/skip if i watch videos on my macbook or straight to my appletv, which supposedly i can do access aswell, is that correct?
just say video file will be 1gb only.. and im going to be only not even 5meters from the extreme device(network).
what transfer rate will it copy/write from and to from one device(usb3 external hdd via powered hub via airport extreme) to my mac?
what is the usb port on the back? 2 or 3?
does anyone have a similar setup or use an airport extreme device for this setup?
and my last question is...
how reliable are these extreme device?
from what i read, these devices only last like two yrs and people have had alot of problems issue with faults etc....

Speed of read/write: if you're going by wireless, you're going to be limited by the wireless speeds. Based on my usage, it seems like wireless N at 5 GHz tops out around 5-6 MB/s (40-48 mbps) with this router. That's fine for video streaming, but will feel slow for heavy file transfer activity.
The USB port on the back of the device is USB 2.0. As a reminder, USB 2.0 is rated for theoretical speeds of 480 mbps, although in practice they're much lower; regardless, it's much faster than the wireless protocols are capable of. Your bottleneck will be the wireless.
I only use a printer with my USB port, so I can't give you any real-world experience with sharing hard drives. You can use a USB hub to expand the ports, but it will need to be a self-powered hub: the Airport Extreme won't power devices through the port. It's also worth noting that trying to use a network-shared disk as a Time Machine drive is a bit flakey; I've read a number of reports where people got it working, but then had their backups become corrupt with time. I haven't read any reports of people having issues with using drives for purposes besides Time Machine, though.
As for reliability, it's hard to say. Nothing lasts forever; you'll find people whose devices failed very quickly, and some who are using generation 1 or 2 devices that are still working just fine. I haven't heard any reports of an usually high failure rate with Airport Extremes. Operation-wise, my Airport Extreme (5th gen) is the most stable router that I've used, and I went through four or five other routers before this one. It's the only router that I have not needed to reboot, even after months of uptime and heavy traffic that usually choked up my other routers. I'm very impressed with it.

Apple Airport Extreme Base Station for PPPoE, DHCP and NAT with ActionTec DSL modem

I just spent several hours trying to track down proper instructions for setting up my Apple AEBS to do the PPPoE, DHCP and NAT while connected to an ActionTec M1000 (no wireless module). It turns out my initial set ups on both devices were correct, but that the order for rebooting and reconnecting the two devices is critical. All of the threads I found on this forum and on many others suggested this was not possible, but it is. What I don't yet know is whether it is the best method for running my home network DSL connection to my ISP (CenturyLink).
The instructions I found that worked come courtesy of Brandon Konkle's blog and are both simple and clear: http://brandon.konkle.us/post/19637529637/centurylink-actiontec-q1000-airport-ex treme-bridge
The proper settings for the ActionTec DSL Modem can be found under Advanced Setup/IP Adressing/WAN IP Address
Click RFC 1483 Transparent Bridging then click on Apply.
(see also http://qwest.centurylink.com/internethelp/modems/m1000/pdf/M1000_BRIDGE.pdf )
To reduce time, do this BEFORE you reset your AEBS then set the AEBS so that you don't have to wait for the AEBS to reboot.
In contrast to what Brandon described for the Q1000 modem, my AEBS never reconnected to the modem (he describes his as getting an IP from his ISP, then dropping it then getting another over and over - mine never got an IP). Once you have reset both devices as described, the critical steps I have not found described elsewhere were:
1. Disconnect the power from both the modem and the Airport Extreme.
2. Disconnect the Ethernet cable between the two devices
3. Restore power to the 2 devices and allow them to fully reboot. For the ActionTec M1000, this is indicated when the lights stop blinking. (Note that the Internet light will NOT be lit in this instance since the modem is acting only as a bridge. You will NOT have an Internet connection until the AEBS is reconnected.) The AEBS will be blinking yellow.
4. Reconnect the Ethernet cable between the devices (make sure on the M1000 that you are using the connector with the circle icon over it, not the arrow icon).
Within about 60 seconds, the AEBS light went to steady green and the connection to the Internet was restored.
Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
Message was edited by: Bud Shaw

Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
No one can accurately predict in advance what the actual results might be. I've tried both ways with different products and cannot say that one method is better than the other. What works is best.
In theory, it is preferable to have the modem provide the PPPoE connection service since it is the device connected directly to the Internet.
In practice, results vary depending on the service provider, products used, phase of the moon, alignment of the planets, etc.

Airport Extreme Base Station and IPv6 -- It just works!!!!

I have a new Airport Extreme Base Station --- in poking around and learning about the features I was astounded to see that I was accessing IPv6 sites ... yes-it supports IPv6 (native and via teredo) --- GREAT JOB APPLE!!!!

Curious, though. Were you able to make it work with DMZ turned on?
I have not tested it with the new 7.2.1 firmware but will do it later.

Why does my Airport Extreme Base Station keep appearing as a Shared device?

After installing 10.5 my Airport Extreme Base Station keeps appearing with a Windows PC icon under the SHARED list in the Finder, and I don't have a hard drive attached. Does anyone know why it's appearing, and how I can make it go away?

Even more weird in my case, I have the Airport Extreme show up twice under Shared. One shows an icon of the actual Airport Extreme which is the one that has the hard drive attached and that works fine. The second is named Airport-Extreme and has an icon like its a PC. lol Not sure what's going on here but if you ask me the first one should be there because that makes sense, but I have no idea why the second one is displayed. Must be some sort of bug.

Problem w/ my Airport Extreme Base Station & Canon i250 Printer

Hi All...
Well, I'm at my wits end...before I call AppleCare, I thought I'd post on here to see if any of you had similar issues or problems with what I'm having, and maybe a resolution(?)...
First of all, I've been using this same setup for the past 1 1/2yrs, and never had a problem with it until lately.
I cannot print reliabily over wireless to the Canon, only through the Ethernet/LAN jack.
Here is my setup...
- Airport Extreme Base Station (w/ telephone jack) and Firmware 5.7
- Powerbook G4 12" w/ Mac OS X 10.4.5
- PC Notebook (HP Pavilion ZV6000) w/ Windows XP and Broadcom 802.11b/g/128 Pre-N
- Canon i250 Inkjet Printer (was originally a free printer..worked very well over the years)
Originally, everything was working very reliably and I never had problems... I'm "guessing" something has changed (firmware?) that has caused any print jobs sent from either the PC or Mac to pause half way through a page and hang the printer. The computer (usually the Mac) will say it is having difficulty "reaching the Canon i250".
I've one a Hard Reset on the AEBS and that has not fixed it. I've not tried Interference Robustness yet but am not sure it will work. I do not have any problems using Wireless otherwise--only with printing, and nothing has change in the setup since I first got the AEBS (except maybe firmware).
Does anyone have any suggestions or insight as to what exactly could be the problem?
Is this a bug in Firmware that I'm not able to find?
Thanks so much for your response(s).

Delete your printer using Printer Setup Utility and
add it back. Does the performance improve?
No it didn't... I deleted, re-installed twice and still nothing new...
However, if I'm printing directly from my tower (WinXP Tower) over LAN, it works fine...but does not work at all through wireless.
For a year or so, I've never had a problem and nothing has changed in this setup. I think the culprit might be the last AEBS firmware update.
I've troubleshot everything I can think of and still having issues printing...

HT4259 How do I set up an Airport Extreme Base Station (v. 7.6.1) to allow wireless network extension?

I have an Airport Extreme Base station (purchased in 2009) and an Airport Express base station (purchased in 2011 - the model that plugs directly into the electrical outlet) (both version 7.6.1 according to the Airport Utility info). I want to use the Airport Express to extend my wireless network. Using Airport utility setup I have a software option on the Airport Express to set it up to extend the network but I do not have an option on the Airport Extreme wireless setup screen that I can check to allow my wireless network to be extended.
All of the documentation I can find on Apple Support states that I should have an option I can check to allow the wireless network to be extended while in the wireles setup section for the Airport Extreme in Airport Utility; but, that check option isn't there. Is this a case of my Airport Extreme base station being too old to offer that option? Incidentally, when I try to select the extend wireless network option on the Airport Express from the Airport Utility wireless setup menu I get an error message (no details - just an error message). The same Airport Express sets up fine if I select join a network (not what I want to do). Am I just dealing with outdated equipment or does anyone have a suggestion? Thanks.

Close AirPort Utility if it is open.
Temporarily, move the Express to the same general area as your AirPort Extreme and power it up and wait a minute.
Hold in the reset button on the Express for 9-10 seconds and then release. Give the Express a full minute to restart to a slow, blinking amber light.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear
Click on AirPort Express just below that and AirPort Utility will automatically open
Wait a minute while AirPort Utility analyzes the network and announces that the Express will be configured to "Extend" the AirPort Extreme network.
Enter a device name for the AirPort Express and click Next
Wait another minute to allow the configuration to occur.
When you see the Setup Complete message, click Done.
Now move the Express to a location that is approximately half the distance from the AirPort Extreme and the general area that needs more wireless coverage
Power up the Express and you are all set. Trash those old instructions.

Airport Extreme Base Station

Where can i buy the base station? I don't live next to a Macintosh store, and i cannot see the Airport Extreme on the internet, only the Airport Express - and i cannot order from the US website?? Very frustrating!
G5 Mac OS X (10.3)

Apple no longer sell the Airport Extreme base station in the UK (and the EU).
http://www.macworld.co.uk/news/index.cfm?NewsID=14979&Page=2&pagePos=13
Some suppliers still have them in stock
http://www.inmac.co.uk/catalogue/item/APBASE05
iFelix

New 10.3.9 install on Pismo G3, Airport Extreme Base Station Error Network

My 10.3.9 Pismo laptop G3 with built in firewire ports worked perfect on my Airport Extreme Base Station — I just Erased and reinstalled 10.3.9 (it was working before I Erased this morning) and now my Original Airport card can't join my wireless network:
*"There was an error Joining the Selected Network"*
I zapped Pram, reset power manager successfully (date reverted).
I accessed the AEBS by a 10.6.3 Mac Pro and checked the Equivalent Password "WPA Password: ####PW###"
Radio Mode selected: 80211n (80211b/g compatible).
APBS version current: 7.4.2
G3 sees my network as expected.
The APEBS hasn't changed (except for the recent update).
I restarted the AEBS.
Still get the error...HELP!
I saw the exact problem on several archived threads, but no one gave a solution or explained the problem (and I'm going blind here).
Again, for the past two years it was working fine with 10.3.9, it broke this morning after I erased and reinstalled 10.3.9.
10.3.9 is the only software loaded on this laptop.

If you just bought it I would recommend calling Apple, they can help you set it up.
Also you should consider getting a high speed Internet connection. They are very inexpensive these days and would make your Internet experience much more enjoyable. Where you live I would think you have a choice of DSL (available from most telephone companies) or Cable, which would be the quickest but also more money too.
Regards,
Roger

Hi I have an airport extreme base station And trying to dial on windows

Ok I have a airport extreme base station the one with dial-up modem and power over ethernet. Well i have people PC as my provider, and can dial the connection on my macbook by using internet connect. but on my hp i can not. I have tried to create a connection type on it and cant figure out how to have it connect like on internet connect. tho i can go the admin utility and click automatically connect and click OK and it dials the connection to disconnect i re click it and click OK and it disconnects but i do not like it that way. So what am i to do and is their a internet connect app for windows. I have also contacted apple and hp and that did not help. Feedback welcome and is needed.
Thanks to all that leave feedback

If you are using dial-up.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com

Printer and AirPort Extreme Base Station with Gigabit Ethernet

Hello!
I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

Hi
Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
Hope that you will solve your problem soon.
Berit

Airport Extreme Base Station and External Hard Drives

Hi all. Bought my first Mac 2 days ago and am very impressed. Such a smooth transition from vista. Just working my way around it and very impressed.
However one minor problem. I have a Airport Extreme base station with a USB Hub and 2 identical Freecom External Hard drives connected. As expected both connected fine and are accessible They name themselves FREECOM HDD and FREECOM HDD (2).
My question how do i change the names of these to be more relevant to me?
I have already tried setup through airport utility. Obviously with 10 years working with windows i could do this with my eyes shut on PC. It is probably just as easy MAC please help......

Select a drive in the Finder and either press Enter or choose Get Info from the File menu and change the name. You may need to connect them directly to the computer instead of through the base station to do this.
(45809)

Maxtor Personal Storage 3200 and Airport Extreme Base Station

I recently purchased an external hard drive and the newer Airport Extreme Base Station. I have two computers. 1 Macbook Pro and 1 PC running Windows Vista. I am having trouble downloading files from the HD over the Base Station to my Vista Machine. I can connect the drive directly over USB to my vista machine and the problem disappears. But when downloading files to Vista over the AEBS i get an error about the Path not existing. I then tried it on my Macbook Pro with no difficulties. I then fired up Parallels and installed the software on my Windows XP image and it works fine. My question is has anyone come up with a fix for this interaction between the AEBS and Windows Vista.

You said you are "using the express to extend my range and play tunes using air tunes". How did you manage to set that up, if neither the Airport Admin Utility nor the Airport Setup Assistant won't allow you to configure these two devices?
Two suggestions:
1. try using another Mac or PC
2. look hard to make sure you don't have some sort of third-party firewall software or VPN client software running on the Mac than is unable to configure your Airport devices.

Configure TC and Airport Extreme Base Stations with different channels

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

Define static IP for both LAN and W-LAN devices with an Airport Extreme Base Station

Hey guys,
I have a lot of different devices connected to my Airport Extreme Base Station (5th Gen) either wirelessly or via ethernet cable. Since I control some of them via VNC and currently have to find the corresponding IP-addresses through trial-and-error, I'd like to define static IP-addresses for the computers in question. My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor. Two of the devices I want to remote-access are wired to a D-Link DES-1005D switch, which in turn is connected to the 1st ethernet port of the Airport Base Station. The remaining 3 remote clients are connected over 802.11n. All computers run Windows.
My problem now is that even though I was able to define static IP-addresses employing the "DHCP only" router mode, this didn't seem to work for the two computers connected via ethernet. Not only did I lose any internet connectivity with those, I even lost the ability to remote-connect to them using the VNC-viewer.
The question now is: how do I specify static IP-addresses for my ethernet devices correctly?
I hope you can help me.

My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor.
If you read the information in the other post, my answer would be the same here.
The Router Mode of DHCP Only is rarely used, and would only really be appropriate if your ISP was providing you with a fixed bank of multiple fixed or static IP addresses to use. This does not appear to be the case in your post.
If this were the case, the first IP address would be used as a Static IP address for your connection, and other devices on your network would receive the other fixed IP addresses.
99%+ of the time, you would use the Router Mode setting of DHCP and NAT on a network when you want the AirPort to perform as the main router for the network.
But......your post also indicates that you have another router upstream on your network from the AirPort Extreme. You would not want to run two routers in series on a network. That explains the problems that you are having.
The AirPort Extreme needs to be configured in Bridge Mode. It cannot be the "main" router on your network when you already have another router on the network. That is a fundamental networking rule.

AirPort Extreme Base Station and Windows Vista and Windows 7

Similar Messages

Maybe you are looking for