Airport Extreme N 7.1.1 Firmware Update and Acomdata External Drive
I updated the firmware and things went fine. I plugged my harddrive into the basestation and powered it on. I opened the Airport Utility Disk Utility and saw both volumes on the external (partitioned) disk. I have enabled disk sharing, but when I put in the password to mount the drive and click OK, my base station disconnects. Before the firmware update, I couldn't see the drives in the Disk Utility window, so I know I'm heading in the right direction.
I have an AcomData combination USB 2.0/Firewire drive, if that helps. Any ideas?
iMac Core 2 Duo 2Ghz 1gig RAM Mac OS X (10.4.9)
I have the same issue. It started today. Though the drive worked up to today.
The moment I connect my AcomData USB2.0/Firewire drive. It immediately disconnects and the status light shows amber and flashes green ever so often.
I called Apple Support and they asked me to bring the AEBS and the drive to the Apple Store.
That's as far as I got, but it is nice to know someone else has this issue.
iMac 1.83 GHz Core Duo 2GB RAM Mac OS X (10.4.9)
Similar Messages
-
Airport Extreme 802.11n gone after firmware update
Started Airport Utility earlier today, just to check a password. An Apple window came up offering new firmware, 7.1.1, I think. I usually accept these offers without thought, so I let the update run. Now Airport Utility cannot detect the Airport Extreme (802.11n). The support page says to check for software up dates, but there were none.
What next?Hello pmacdd. Welcome to the Apple Discussions!
First, try quitting, and then restarting the AirPort Utility, and then, try accessing the AEBSn.
If this doesn't solve the problem, then try connecting your computer directly, using an Ethernet cable, to one of the LAN ports of the AEBSn and then try accessing the device. -
since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.
I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy. -
Why does AirPort Extreme stop working when I plug in a USB hard drive?
Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.
The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept. -
I just did an Time Capsule firmware update and now my Time Capsule is dead. What happened?
I just did a Time Capsule firmware update and now my Time Capsule is dead. What happened?
tresbaileys wrote:
it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility). Ideas??
That is very bad.. how old is it??
The Gen4 TC can die this way.. it is not usual but it happens.
Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
Tell me exactly what the LEDs do throughout this process.
Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
I kind of doubt you are going to get this going again... but we can try. -
Latest firmware update and more problems with 30" external displays?
Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update? -
I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.
It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there. -
Please help! I have an Airport Extreme (model A1143) as my router, and I have several devices connected to it wirelessly and wired. I have my Macbook, Macbook Pro, iPad 1, iPhone 4S, HTC Thunderbolt, Cannon wireless printer, and Apple TV (gen 1) connected wirelessly. I have my PS3, an external hard drive and DirecTV connected via ethernet cable (but sometimes my PS3 is also connected wirelessly).
I began to notice a few months back that my wireless printer had connection errors and could not print. And I noticed soon after that, from time to time, the internet connection on my Macbook and iPad was extremely slow, to the point that I could not surf the web. I tried several different printers before realizing that this problem was happening only when I had my PS3 turned on. I tried both PS3 wirelessly and wired, but the problem persisted. I figured it was a problem with the PS3, so I just made sure that PS3 is off when I need to use the wireless in the house. But I recently bought an ATV (gen 1) and also noticed the same problem when it was connected to the Airport Extreme (wirelessly) - i.e., Ican't print, and my internet is super super slow on macbook, ipad, etc.
So, it must be that my Airport Extreme is the problem, not the PS3 or the ATV. Is there anything I can do to fix this (i.e., some setting that has to be changed)? Or do you think that my Extreme is just dying out on me and it's time for a replacement (I bought it about 5 years ago)?This problem, for reasons unknown to me, has resolved itself on its own. After several attempts finally everything decided to work. How does stuff like this happen? Thank you.
-
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port
Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.
-
I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.
Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...
-
Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?
Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule -
10.4.6/firmware update and sync not working? No, .mac is down
I went to sync .mac this morning, and I guess it was the first time since installing the firmware update and 10.4.6. It first said another computer with the same name was registered, then hung. Next time it said it was not registered and proceeded to sync very slowly then exit with errors. After a reboot there was still trouble. Then I thought to check and found on .mac that the sync service was down since yesterday, and remains down.
Funny how I thought my system was acting crazy when it was the .mac system itself that's experiencing problems.
MarkI got my bookmarks to sync this morning, but nothing else would.
-
I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
Maybe you are looking for
-
Issue with Calling Rest Web Service using Designer workflow
Hello all I am calling a Rest web service- HTTP Post (yammer API)- http://www.yammer.com/api/v1/messages.json?data-app-id=myappid&group_id=groupid&body=MyPost in yammer using sharepoint 2013 designer workflow.(My Requirement is to create a yammer po
-
Hi experts, I have a PI SOAP Receiver, sending to a Java Powerbuilder app. I am getting an HTTP 200, but with an error message in SXMB_MONI: <SAP:Category>XIAdapterFramework</SAP:Category> <SAP:Code area="MESSAGE">GENERAL</SAP:Code> <SAP:AdditionalTe
-
Reloading support classes in a web-app?
Hi, I had previously been successful in compiling classes to a directory which was specified in the weblogic.properties file as the weblogic.httpd.servlet.classpath. If a class were recompiled, the up
-
Can you say internally what happens?
String s1 = new String("ABCDEF"); String s2 = new String("ABCDEF"); if(s1==s2){ s.o.pln("true") }else s.o.pln("false") } here it gives false String a="xxxxx"; String b="xxxxx"; if(s1==s2){ s.o.pln("true") }else s.o.pln("false") } here it gives true
-
I upgraded my windows XP to Windows 7 Acrobat 5.0 does not install properly?
I upgraded my Windows XP to Windows 7. I tried to install my Acrobat 5.0 using the CD, it did not work. It says " Your version of Adobe acrobat 5 isn't compatible with version of Windows." Is there a way to install it and make it works on Windows 7?