Airport Internet to Macbook Pro to Powermac G5 via Firewire

Hello,
I am having signal reception issues with my powermac and airport network. To get around this, I connect my powermac to the macbook pro via an ethernet cable and share internet (this is great for moving the files I do back and forth) so I am ok with the arrangement.
The problem is that I want to share the iTunes library that is on the powermac to my apple tv. The powermac and macbook recognize eachother's libraries, and the macbook connected to the airport network is syncing/sharing with the airport.
I know it because somehow the powermac is on a different network, but I would think there is some way to make it show up on all the airport connected devices even though it has to connect via the firewire.
Any help is greatly appreciated. I know this sounds a little convoluted, but hopefully it is decipherable.
Kind thanks!
Chaz
[email protected]
[email protected]

The iTunes sharing won't cross a subnet.
The Internet sharing service on the MacBook Pro is creating a subnet to allow the Mac Pro access. There is no way to configure Internet sharing so that it does not create this subnet.

Similar Messages

HT201257 hardware test using an external optic device (iMac) on macbook pro 9 years old via firewire. What to do? and how to do it?

hardware test using an external optical device (iMac) on macbook pro 9 years old via firewire. What to do? and how to do it?
I thiunk the graphic card is defective and need to run hwt

You don't.
Need a internal optical drive and the Hardware Test on disks is old and outdated anyway.
Your machine has lasted a long time, congratulations, they usually only last about 4-5 years.
They get clogged up with dust and overheat, kills the video card, there is nothing you can do as it's hardware damage over time.

Transferring files from MacBook Pro to new iMac via Firewire

Hi guys
My MacBook Pro is seriously on its way out and I would like to transfer my music files, work documents, photographs, videos etc. onto my brand new iMac and the best way to do this I would think would be to link the two up via Firewire. The MacBook Pro is no longer accepting my external hard drive and fails during during DVD's, so those options are out.
So I was wondering if someone could advise me on what type of Firewire cable to get. As far as I'm aware I didn't get one with either the MacBook Pro or the new iMac, so I think a purchase is necessary however, I've spotted that there are different kinds with different ends, some which have 6-pin, 8-pin and 9-pin and I have no idea what to get. Could someone advise me on what would be the best item to get for this situation?
My MacBook Pro is one that was the model before the black keyboards came back in, and the iMac is the brand new one at 21".
Thanks for your help guys.
Steve.

Hi
FireWire 800 / FW800 / IEEE 1394b uses a 9-pin connector for both the imac and the macbook pro.
good luck.
M.

How do I set up airport on my macbook pro (wired with ethernet to cable modem) and my ipad2 to use ipad wifi?

How do I set up airport on my macbook pro (wired with ethernet to a cable modem) and the wifi settings on my ipad2 to enable the use of wifi on my ipad?

http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html

How to share internet from macbook pro to android phone?

how to share internet from macbook pro to android phone?

Sharing your Internet connection:
http://support.apple.com/kb/PH6589
http://www.maclife.com/article/howtos/how_wirelessly_share_internet_connection_m ac

How do I print from wifi-connected MacBook Pro to printer connected via USB to Win7 PC?

This is really frustrating, and I did not think that anything could be this difficult on a Mac. I have a Windows 7 Home Premium desktop PC connected via ethernet cable to wireless router, and a printer connected to the PC via USB. I recently bought my first ever Mac - a MacBook Pro, which is connected via wifi through the same router. All I want to do is to print files from the MacBook Pro on the printer connected to the PC. I have spent a LOT of time searching all over the web. Have tried some 2 or 3 different methods but none of them work for me, e.g. I shared the printer on the Win7 desktop and then added the printer on the MBP with the IP option with LPD/LPR Protocol, after enabling LPD Print Service on the PC. The printer gets added but when I give the command to print from the Mac, the print job shows up on the printer queue but the "Printing" soon changes to "Error Printing" (or something like that) and nothing gets printed. Then, I have to switch off the printer, remove the print job from the queue and switch on the printer again to get it out of the error state.
I also tried setting up the printer on the MBP using CUPS Admin interface, i.e. localhost:631. Again, printer gets added but document does not print. The third way I tried to add the printer was using the Windows option in the Add Printer dialog, and typing in an smb: URL but no luck with that, either.
Please, can anyone help me? This is driving me crazy
Oh, and the devices are:
1) Windows 7 Home Premium Desktop PC
2) MacBook Pro running OS X Mountain Lion
3) HP Deskjet F2110 printer
Thanks...
- Ajoy

First Install Bonjour for Windows on your Windows machine. This will allow the printer to be discovered.
http://support.apple.com/kb/DL999
Then use this article:
OS X Mountain Lion: Set up a printer shared by a Windows computer via SMB/CIFS

How do I "move" (not copy) keynotes from my MacBook Pro to my iMac via sharing?

How do I "move" (not copy) keynotes from my MacBook Pro to my iMac via sharing?

Whenever you transfer something from one drive or volume to another, it is copied and the original remains where it was no matter the method you use. It is so by design: just in case you were to delete it on the one drive, you still have it on the other. However, if you no longer want the original, simply delete it and empty the trash.

I can't play a DVD from my superdrive via my macbook pro to apple TV via airplay.

I can't play a DVD from my superdrive via my macbook pro to apple TV via airplay. The movie plays fine on the macbook if I'm not trying to airplay. The airplay works fine if I'm not trying to play a movie from the superdrive. I think my apple TV is Gen 2.

If you get a checkerboard pattern it's because Apple block Airplay Mirroring of protected media.
VLC Player may work.
AC

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

I have connected my macbook pro to my tv via MDP to HDMI port cable, all that is showing up is the basic desktop image without any icons, what do i do to correct this

i have connected my macbook pro to my tv via MDP to HDMI port cable, all that is showing up is the basic desktop image without any icons, what do i do to correct this

Your MBP is running in "extended desktop" mode, where the two screens together make one larger area to display windows. You can drag one or more windows from the primary (internal) screen to the secondary (TV) screen. By default, the secondary screen is off to the right of the primary screen.
If you would prefer the two screens show the same image, you want to switch to "mirroring" mode. You will have to pick a single resolution for both screens, which may look poor on one or the other.
Both the relative positions of the two screens in extended desktop mode and the switch to mirroring mode can be set in System Preferences > Displays > Arrangement.

I want to transfer my iPhoto from my old MacBook Pro to my new MacBook Pro. I have a firewire or I could also do it from my TimeCapsule. Would one be a better method than the other?

I want to transfer my iPhoto from my old MacBook Pro to my new MacBook Pro. I have a firewire or I could also do it from my TimeCapsule. Would one be a better method than the other?

Hi brotherbrown,
A direct FireWire transfer (especially if it's 800 to 800) is going to be the fastest method. TimeCapsule would work, if you connect to it via Ethernet, via wireless it would be quite slow (especially if you have a large library).

TS3850 What if ingesting from DV tape to FC X using the Macbook Pro Retina which lacks a firewire port

What if ingesting from DV tape to FC X using the Macbook Pro Retina which lacks a firewire port

I have used it quite a bit for connecting to external drives, etc. with no problems. Have not done a tape ingest as we don't have tape based cameras to work with any more. It appears to emulate a FW800 port perfectly.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=885718&Q=&is=REG&A=detail s
MtD

How do I sync contacts in my macbook pro w/ iphone 4s via usb?

How do I sync contacts in my macbook pro w/ iphone 4s via usb?

Open itunes, connect iphone, select the contacts to sync, sync.
See the manual:
iPhone User Guide (For iOS 5.0 Software)

Airport Extreme Connected to Internet but Macbook Pro will not

I'm living in an apartment and using an Airport Extreme to supply wireless connection. The internet is paid for by the apartment complex and I have no access to the modem. Up until yesterday the internet worked fine for all devices. I did several factory resets on the Airport Extreme and now have confirmed internet access with my PS3 and smartphone connected to the wireless network. However, my macbook pro will connect to the wireless network but will not go beyond that to the web. I have renewed DHCP leases, reset network configurations and deleted plists to refresh everything but it still does not work. I have noted that when connected to the network, I have an IP address that begins with 192.168.x.x and the macbook states the router address begins the same way. The Airport Extreme displays an IP address of 172.xxx.x.x
I can manually input the routers IP address into my laptops network configuration and create an IP similar and connect to the internet through the laptop but if I want to connect to other networks I have reset that information. It simply won't work automatically. The airport extreme is setup in bridge mode. That is the only setup which would offer stable networking without any dropping or the device disappearing from the airport utility.
I'm currently out of my apartment and will call my ISP later today, but this problem has affected my roommates macbook's as well. My last attempt to connect directly into the wall ethernet jack yielded the same results without any internet connection.

Try this:
Put the Airport Extreme in Bridge Mode and plug the apartment ethernet cable into a normal ethernet port on the back of the Airport Extreme instead of the normal "Internet" ethernet port.

Airport Internet to Macbook Pro to Powermac G5 via Firewire

Similar Messages

Maybe you are looking for