AlChemy stops working when Xonar is installed in the same system as X-Fi?

A while back I tried to use an X-Fi Prelude and Xonar D2 in the same system. For the most part this worked, however AlChemy would no longer allow hardware sound in various games on the X-Fi. The results were the same whether DS3D-GX was turned on or off on the Xonar. Another user on a forum I frequent has been able to replicate the issue with a Creative X-Fi and Xonar Essence STX. Can someone suggest what might be happening and hopefully let me know if there is a work-around?

Try older (year+) xonar drivers. Xonar and X-Fi worked fine for me back in 2009. Recently I re-inserted Xonar with newest drivers for some testing and discovered same bug. I think this may have something to do with more agressi've/reckless hooking in GX service (HrMsg), even if GX disabled in Xonar's CP. Killing this process with task manager seems to fix Alchemy.

Similar Messages

Multiple agentry servers installed in the same system?

Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael Appleby

Hi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby

TS1717 I have today purchased an iPod nano. I am using Widows 7. When I try to register the iPod I get the message that " iTunes has stopped working" I have reinstalled iTunes with the same result. Where do I go from here? Brian.

I have today purchased an iPod nano (gen 6); I use Windows 7. Am trying to register my iPod but each time I submit required info I get the message "iTunes has stopped working". I have reinstalled iTunes with same result. Where do I go from here?
Brian

Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Pro & Express Installed On The Same System

One of our videographers recently installed Final Cut Express 4.0 along side our enterprise standard Final Cut Pro 5.1.4 for a current educational video project that initailly used Final Cut Express 4.0 in the field.
Now, when one of our producers is trying to import the Express project files into either Express or Pro on that system she is receiving an error that basically says that the files are too new to be opened.
In my mind, the solution to this issue would be to uninstall both Pro and Express and then do a clean install of Pro 6 or 7.
Thoughts... suggestions?

This error message is something that has been occurring with FCE 4 occasionally.
You may get more info on the FCE Forum.
FWIW I don't think it has anything to do with both apps being installed on the same computer.
I have them both and have never had a problem with FCE 4 and FCP 5 on one computer and FCE 4 and FCP 6 on another.
The only people experiencing the trouble have just had FCE 4 installed.
CORRECTION !
It has also been happening to FCP 6 users. If you do a search you should find plenty of correspondence.
Message was edited by: Ian R. Brown

Microsoft Setup Bootstrapper Has Stopped Working when Trying to Install MS Project Professtional 2013

I cannot get the trial version of MS Project 2013 to load onto my computer.
I keep getting "Microsoft Setup Bootstrapper Has Stopped Working" error message when attempting to download.

What operating system are you attempting to install to?

ScenarioEngine.exe has stopped working when trying to install sqlserver 2014 Express with tools.

I have downloaded the enu file from MS, for the above SQLServer 2014 express edition.
After checking that all the prerequisets had been met, I extracted the files, from the enu, to a folder and ran the Setup.exe.
Immediately, I received the warning "The ScenarioEngine.exe has stopped working" and the installation stops.
I did not encounter this issue installing SQLServer 2012 Express with tools, on the same pc, and it has been running without any issues,
The pc concerned is running Windows 8.1.

SQL Server 2014
1. Save the following in a text file, change the extension to .reg, double-click on the file, and on the prompt that appears, select yes to populate the registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap]
"BootstrapDir"="C:\\Program Files\\Microsoft SQL Server\\120\\Setup Bootstrap\\"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap\Setup]
"PatchLevel"="12.00.2000.80"
2. Next, copy the following files and folders from the media to the specified destinations:
File/Folder in media
Destination
X64/X86 folder (depending on what architecture you want to install)
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Setup.exe
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Resources folder
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Next, re-run the setup, and it should proceed beyond the point of error this time.
As always, comments/suggestions/feedback are welcome and solicited.

Why does Creative Cloud Setup stop working when I re-install the program?

I have Photoshop CC and Lightroom CC trough Creative Cloud. But then Creative Cloud stopped working -and now I need help to get CC running again.
I have read the troubleshootingpages and this is what I have done so far:
I uninstalled Creative Cloud
Restarted the PC
Downloaded and run CreativeCloudSet-Up.exe
After about 5 minutes of downoading and installing:
Creative Cloud Setup has stopped working.
Problemsignatur:
Navn på problemhendelse: APPCRASH
Programnavn: CreativeCloudSet-Up (5).exe
Programversjon: 2.9.1.474
Tidsstempel for program: 54e11f94
Navn på feilmodul: AdobePIM.dll
Feilmodulversjon: 2.9.1.474
Tidsstempel for feilmodul: 54e11f95
Unntakskode: c0000005
Unntaksforskyvning: 00010e25
OS-versjon: 6.1.7601.2.1.0.768.3
ID for nasjonal innstilling: 1044
Tilleggsinformasjon 1: 0a9e
Tilleggsinformasjon 2: 0a9e372d3b4ad19135b953a78882e789
Tilleggsinformasjon 3: 0a9e
Tilleggsinformasjon 4: 0a9e372d3b4ad19135b953a78882e789
I have done this 5 times and NOTHING HELPS.
ANY CLUE WHAT TO DO??

Bjørnarj6963233 I would recommend utilizing the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application. Also which operating system are you using?

Why does iTunes stop working when trying to connect to the iTunes Store on PC

Everytime I try to go into the iTunes Store on my Windows 7 PC I get a popup that says "iTunes has stopped working, Windows will try to find a solution to the problem."
I wonder why this is happening and I just updated to the new iTunes version about 10 minutes ago (I had this issue with the previous version too.) What do I do?

I don't believe it's just you. I am having an issue with iTunes myself on both my iMac and MacBook Pro. The iTunes store won't load as far as viewing my account info or trying to download previous purchases.

Why does iTunes stop working when I try to type the album name in to submit cd track names?

I have a cd that I'm trying to separate, but whenever I try to type the album name in the submit CD track names box, iTunes freezes, then quits working. Why is it doing this and what can I do to stop it?

Does it happen for any slideshow? Or only for one slideshow with certain images?
Does iPhoto also freeze for a new iPhoto library, if you create a new library with some test images?
If iPhoto only freezes for a certain slideshow, check, if it is one of the photos or videos, that is making the slideshow freeze. Create a new slideshow and add the images one by one, to fnd the one, that cannot be played. Remove it.
If iPhoto only freezes with all slideshows in your current library, repair your iPhoto library. It may have been migrated with permission issues. How did you restore the library, after you wiped your mac and clean-installed?
To repair the library using the First Aid Tools, see Old Toad's post here: Rebuild iPhoto Library, Version 11, see "Fix 1". In your case, I'd start with Repair Permission, the Repair database. Apply the other fixes, if need be.
Post back, if the repair does not help.
Léonie

My touchpad (mouse) stops working when I connect it to the power cord?

It works fine when It's not connected to the power cord... but as soon as I connect it and I try to use my touch pad it just goes erractic and like I can't click anything and it's just unusable. What can I do to fix this (aside from buying a new power cord....)
My computer is updated completely.
It is a Macbook.

Try troubleshooting the adapter > Apple Portables: Troubleshooting MagSafe adapters

Itunes stops working when ipad gets connected to the computer

I start up iTunes, connect my iPad 2 vis USB and then iTunes quits. I run Windows 7 on my PC and have iOS 4.3 on my iPad. It used to work correctly - this problem just started. I have tried restarting the computer.

latests version of itunes on the computer? if not get the latests version of itunes

ITunes12 stops working when syncing with iPhone5. It can't copy the files. Tried everything; uninstalling, re-installing, updating... Still the same. HELP Please? :'(

This just happened a day ago. It was when Windows failed to update. When I plugged my phone to the laptop, there seemed to be a pop-up box appearing in iTunes saying, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" At first only the album artworks of the songs were not copied. I tried uninstalling and re-installing it using the instructions from here: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support. But still, it did not work. That's why I though t that maybe because Windows wasn't able to update that's why syncing keeps on crashing.
However, after that failed update yesterday, I was able to update Windows 8.1 today. After that, I tried uninstalling and re-installing iTunes. I cleared up everything even the contents from the library to start anew. After that, I tried syncing it with my phone hoping that it would finally sync. Unfortunately, that evil pop-up window appeared again.
I really don't know what to do about it. I've been using iTunes for how many years already and I have never experienced crashing.
And about that solution, well Windows haven't notified me yet. And I doubt if they will.
I really hope that someone out here could help me solve this problem. I've been stressing out about this the whole day. It's just so hard because there are a lot of files that I lost, especially music. </3
Thanks

Hi shararara,
Welcome to the Apple Support Communities!
I understand that you are receiving an error that iTunes has stopped responding. I know you have already tried some treat troubleshooting, but in this situation I would suggest working through the steps suggested in the attached article.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Best regards,
Joe

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

The CC version will not activate with your perpetual CS6 license. Download the version from here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Your number should work with this version.

"Microsoft Visual Studio 2013 Professional Stopped Working" When I'm Trying To Install

So for a college class we were given a link to a visual studio exe file. Visual Studio 2013 Professional Update 2.
When I try to run the exe file it just gives a black rectangle for a few seconds with the visual studio logo on it then stops and gives the message I showed in the thread title. and it also says "A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
I have the 4.5.2 update.
Can't figure out why I can't install it.
Heres a link to the vslog:
https://onedrive.live.com/redir?resid=E43E7310F1682778%21113
Hopefully someone can solve this.

Hi,
I see your logs and find the main errors:
Error 0x80070642: Failed to install MSI package.
Error 0x80070642: Failed to execute MSI package.
Error 0x80070642: Failed to configure per-machine MSI package.
Failed to resolve source for file: C:\Users\Paul\Downloads\packages\professionallp\cab8.cab, error: 0x80070642.
Error 0x80070642: UX aborted on download progress.
Error 0x80070642: Failed to send progress from BITS job.
Error 0x80070642: Failure while sending progress during BITS job modification.
Error 0x80070642: Failed attempt to download URL: 'bits://go.microsoft.com/fwlink/?LinkId=318664&clcid=0x409' to: 'C:\Users\Paul\AppData\Local\Temp\{02a877fe-5dac-4ac0-b869-4b9da00f651c}\cab46316ED5168B23181115750DAC599E81'
Error 0x80070103: Failed to find product code for given upgrade code.
According these errors, It seems the issue was due to you are using a web installer and your installation source may be corrupted.
You can download the latest Visual Studio Professional 2013 package now:
http://www.microsoft.com/en-us/download/details.aspx?id=44916
I recommend you can install the VS by ISO installer.
•Choose this download link, and then choose the Save button.
•After downloading the ISO file, you should use the
File Checksum Integrity Verifier tool to calculate and verify that the SHA-1 value for this file matches the value listed on the
Visual Studio 2013 ISO Files SHA-1 Values page.
And after down load you should follow up these
Installation Tips in the link to install your VS.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Reader stops working when newest GTK2.0 installed - bug report and proposed fix

Adobe Reader 7.0.9 (Linux i386) stopped working when I installed a batch of updates on Xubuntu Feisty Fawn (7.04). The updates included GTK 2.0, version 2.10.11. The symptom was that upon startup, Reader ended up in a seemingly infinite loop, printing out "expr: syntax error" (when started from terminal emulator). A few debug "echo"'s revealed that the loop concerned function get_gtk_file_ver().
The bug itself is on line 418. The original line is as follows:
echo $mfile| sed 's/libgtk-x11-$[0-9]*$.0.so.0.$[0-9]$00.$[0-9]*$\|$.*$/\1\2\3/g'
- note that there is no '*' in the middle number-matching regexp, so the full expression matches only strings in which the "middle" group is 100, 200, ..., 900.
At this point in the execution, $mfile contains the name of the gtk library .so, in this case, libgtk-x11-2.0.so.0.1000.11. In prior versions (e.g. 2.8.20, which is the current version in Ubuntu Dapper Drake LTS), the minor version had only one digit, and the regexp matched. When the minor version got incremented to two digits, the regexp no longer match because of the missing '*'! As an additional bonus, somehow this leads to the infinite loop (which is *not* good).
A working fix is to add the missing '*' into the regexp. I'd say that a lot of Linux users will be tripping on this issue soon, at least those who keep current on security updates.
I found no sensible way to contact the developers, i.e. a way that wouldn't have to pass a gazillion of customer-service and tech support people, who are most likely just as unaware of the issue as the users...
I hope this issue will be fixed ASAP - after all, it's only one added character, and that'll save a lot of users a lot of hassle.
(and btw, to have the intended effect, the dots in the sed expression should all be escaped with a backslash - now e.g. "libgtk-x11-2.0.sog0.1000.11" matches the sed regexp as well as "libgtk-x11-2.0.so.0.1000.11", but this probably isn't too critical...)

The solutions provided here work, but by accident. The script compares 2104 (2.10.4) to 240 (2.4.0) and sees that it's greater. Adobe will have problems in future releases if the minimum GTK release is, say, 2.10.4 and the user has 2.4.0.
I've crafted a more elegant solution, shown here in "patch" format. I think the reformatting and tab elimination done by HTML will preclude you from pasting this into a file and running "patch", but it's pretty easy to read and is short...
--- /usr/local/Adobe/Acrobat7.0/bin/acroread~ 2007-01-05 14:56:39.000000000 -0500
+++ /usr/local/Adobe/Acrobat7.0/bin/acroread 2007-08-03 09:33:08.000000000 -0400
@@ -409,13 +409,13 @@ get_gtk_file_ver()
fi
mfile=`basename $ifile`
- echo $mfile | grep -q "libgtk-x11-$[0-9]*$.0.so.0.$[0-9]*$.$[0-9]*$" 2>/dev/null
+ echo $mfile | grep -q "libgtk-x11-$[0-9]*$\.0\.so\.0\.$[0-9]*$\.$[0-9]*$" 2>/dev/null
if [ $? -ne 0 ]; then
return 1
fi
- echo $mfile| sed 's/libgtk-x11-$[0-9]*$.0.so.0.$[0-9]$00.$[0-9]*$\|$.*$/\1\2\3/g'
+ echo $mfile| sed 's/libgtk-x11-$[0-9]*$\.0\.so\.0\.$[0-9]*$00\.$[0-9]*$/\1.\2.\3/'
return 0
fi
@@ -455,16 +455,25 @@ check_gtk_ver_and_set_lib_path()
continue
fi
- len_version=`expr length $version`
- base_version=`expr substr "${base_version}0000000000" 1 $len_version`
- len_base_version=`expr length $base_version`
- while [ $len_version -gt $len_base_version ]; do
- base_version=`expr substr "${base_version}0000000000" 1 $len_version`
- len_base_version=`expr length $base_version`
+ ok=true
+
+ while [ -n "$base_version" ]
+ do
+ base_subversion=`echo $base_version | sed 's/\..*$//'`
+ subversion=`echo $version | sed 's/\..*$//'`
+ if [ $subversion -lt $base_subversion ]
+ then
+ ok=
+ break
+ elif [ $subversion -gt $base_subversion ]
+ then
+ break
+ fi
+ base_version=`echo $base_version | sed 's/^[0-9]*\.*//'`
+ version=`echo $version | sed 's/^[0-9]*\.*//'`
done
- if [ $version -ge $base_version ]; then
+ if [ -n "$ok" ]; then
export LD_LIBRARY_PATH="$idir":"$LD_LIBRARY_PATH"
IFS="$OLD_IFS"
OLD_IFS=""
@@ -640,7 +649,7 @@ fi
# Check the version of gtk and update the LD_LIBRARY_PATH if required.
if [ "`uname -s`" = "Linux" ]; then
- MIN_GTK_VERSION="240"
+ MIN_GTK_VERSION="2.4.0"
check_gtk_ver_and_set_lib_path "$MIN_GTK_VERSION" ### returns 0 if found gtk >= 2.4
fi

AlChemy stops working when Xonar is installed in the same system as X-Fi?

Similar Messages

Maybe you are looking for