Alert Configuartion for File Transfer

Hello,
        I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
Thanks.
Regards,
Mayank

Hi,
With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
Refer
XI : How to Re-Process failed XI Messages Automatically
XI :  How to Re-Process failed XI Messages Automatically
XI: Alerts - Step by step
The specified item was not found.
For successfull messages there will not be the alert notification  available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
Thanks
swarup

Similar Messages

  • Which protocol we should use for file transfer in ios ?

    which protocol we should use for file transfer in ios ?

    My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

  • Steps for File Transfer through FTPS...!!!

    Hi ,
    Can anyone please tell the steps for file transfer with FTPS.
    Does PI file adapter has bulilt in feauture to handle this? or
    Do we need to deploy anything to handle this?
    Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
    Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
    File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
    Please suggest me.
    Thanks
    Krupakar

    Hi Shabarish,
    We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
    Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
    Ip: XXX.YY.YY.ZZZ
    Port: 990
    User and pwd.
    and I am getting the same below error
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
    I tried by selecting different options like
    1. Without selecting the X509 certificate for client authentication.
    2.  Keystore as TRUSTED\view\entry-cert
       X509 certificate and private key as TRUSTED\view\entry-cert
    3. Keystore as TRUSTED\view
      X509 certificate and private key as TRUSTED\entry-cert
    4.Keystore as "view"
      X509 certificate and private key as "entry-cert"
    Please help me in this.
    Thanks
    Krupakar

  • Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

    Hi Recently i have upgraded developer 6i by applying patches.
    After when i am trying to submit active users and active responsibilities.
    Those also getting completed
    But when i am trying to click button view output or view log
    I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
    Can anybody tell me what is the issue. Waiting for your reply
    Ganesh

    I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
    The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
    Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

  • Alert Configuration for File to IDoc scenario

    I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    and configured Alerts for file to IDoc scenario.
    But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
    Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
    Regards,
    Suraj Kumar

    hi Suraj,
    WHich SP version are you on??
    If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
    From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note <b>870232</b> for this info.
    Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
    If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
    Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
    If this is working fine, then the last step, implement the note 913858.
    Regards,
    Bhavesh

  • Plz hel for file transfer using zmodem protocol

    someoe plz help me. i have to devlop an application that transfers files betwn 2 pcs(both ways) using dial up connection, further it should autodial the connection at periodic times.
    i am trying to use Zmodem file transfer protocol. i succseed in sending string (for test)using my sender program with hyper terminal open on the other hand. it prints the string. but when i use my receive program, similar to given in samples(simpleread.java) it doesnt work.
    actually when the ring comes from the sender how to send command to modem to hang up and connect to the calling pc if there are any such commands then plz help.
                                  ----sameer

    someoe plz help me. i have to devlop an application
    that transfers files betwn 2 pcs(both ways) using dial
    up connection, further it should autodial the
    connection at periodic times.
    i am trying to use Zmodem file transfer protocol. i
    succseed in sending string (for test)using my sender
    program with hyper terminal open on the other hand. it
    prints the string. but when i use my receive program,
    similar to given in samples(simpleread.java) it doesnt
    work.
    actually when the ring comes from the sender how to
    send command to modem to hang up and connect to the
    calling pc if there are any such commands then plz
    help.
    ----sameerU ddnt abrvt nuf. I r3r1t 4 U.
    Sum1 plzz hep m3. i 1/2 2 dvlop app taht xfer fil betwn 2 pcs(bth wys)...

  • 8900 to imac bluetooth connection for file transfer

    Hello,  I  have a brand new curve 8900 javelin and a new IMAC.  Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects.  Can someone please tell me how to overcome this problem?
    thank you 

    That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
    The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
    I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
    By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

  • Bluetooth - any hope for file transfer in near future???

    Hi,
    Presently iPhone 4 does not allow bluetooth file transfer to other mobile devices and even my PC.
    I am not interested in illegal music/video transfer but genuinely transferring my data files between pc and other mobile devices and use it like a mobile storage device. I don't like the idea of mailing my file and then downloading it again when I have both devices in my hand! It's not helpful when other devices do not have internet connection or limited internet usage.
    Please let me know if apple policies would allow it to make file transfer possible in near future (except music and video). Otherwise it would greatly reduce its usability for me.
    *I hate its file storing and transferring features.*
    *Another reason for hating iPhone is 'Flash'.*
    Apart from this, its simply superb.
    agmad

    Hoekstes wrote:
    Why is something so simple its available on 10 year old Nokia 3310 bricks not available on an iPhone. Its ridiculous.
    Because there is nowhere to put the files on an iPhone. There is no common file storage area on an iPhone that all apps can access. Each app sits in a sandbox for security purposes. Each app can only access its own files. You would have to have an app running where the files would go, and then the files would only be available to that app.
    The old Nokia has a common file area and does not have the security the iPhone does, but then 10 years ago you probably did not need the security.

  • TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

    I have a dell laptop and a mac book air, both connected to my TC. Transferring files is a joke. I am a novei mac user. How can this slowness issue be fixed for both the pc and mac? As I am writing this, i am currently doing a software update on my macbook air, getting 10.5.3 now. Does this solve it?

    Similar problem here.
    iMac using 802.11n to connect to time capsule. Time capsule configured to use 802.11n (b/g compat), and WPA/WPA2 security.
    Typical transfer rate (file transfer from imac to tc) of about 2Mbps. After reboot of the TC, speed can sometimes hit 6Mbps.
    I have played with the security settings. After a softboot with new config:
    - no security, 802.11n mode: 12Mbps throughput
    - WEP security, 802.11n mode: 8Mbps
    - WPA/WPA2 security, 802.11n mode: 6Mbps
    Enabling interference robustness seems to have little or no effect.
    All of these speeds are significantly lower than what I'd expect.
    No other devices were on the wireless network during the testing.
    I've read that alot of others are having similar issues. I suspect that most of these devices are running extremely slowly, but most people aren't bothering to check throughput.
    Would love to know if there is a real fix out there. 802.11n should be much much faster than this. If I could reconfigure the TC to use 802.11g, I would.

  • Ichat auto accept for file transfer?  way to combine buddy lists?

    1) on the new leopard ichat, is there an auto-accept mode for file transfers so that anyone on my buddy list can automatically send me files?
    2) i have a google chat and aim accounts running. they run on separate buddy lists. is there a way to combine them to only have one buddy list window?

    You can actually. Go to iChat > Preferences > Alerts, select "Incoming File Transfers" from the pull-down menu, check "Run AppleScript", select "Auto Accept.applescript". Your file transfers will be accepted by default

  • Slow Transfer Speeds For File Transfer Manager 5.0 Build 0032

    I have a 20Mbit internet connection. When I download from the Microsoft download site I can get files downloading at reported speeds of up to 1.7 Mbytes per second.
    When downloading from the TechNet Benefits section I have to use the Transfer Manager and I can only get speeds that vary between 30-80 Kbytes per second. Rarely any faster.
    I am using XPPro & IE7 straight out onto the Internet via my router / firewall. No proxy server.
    What can I do to speed the process up or bypass the File Download Manager?
    Regards.

    Thanks for your feedback Tekky.  FYI there is also a forum specifically for TechNet Website Feedback which is the more appropriate place for TechNet Subscriptions questions at http://social.technet.microsoft.com/forums/en/tnfeedback/threads/
    There are many suggestions in this post about improving your network speeds when downloading from MSDN and TechNet subscriptions sites.  Here is one more place to look for tips, which we have linked to from our Downloads and Product Keys FAQ (MSDN version, TechNet version): 
    The website for the Microsoft File Transfer Manager, particularly their troubleshooting page which includes additional discussion on configuring the FTM and on slow transfer speeds. 
    As Julie stated above, you can call TechNet Customer support and they can take you through some additional troubleshooting and diagnostic steps to assist.  Julie has linked to the support phone numbers in her reply.
    Thanks,
    Mike Kinsman

  • Where can I find the jar file for File Transfer Service API

    Hi all ,
       I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
    <b>import com.sap.engine.services.file.RemoteFile;
    import com.sap.engine.services.file.FileTransfer;
    import com.sap.engine.services.deploy.DeployService;
    import com.sap.engine.services.deploy.container.WarningException;</b>
    Thanks in advance ,
         Tahzeeb

    Hi,
    you can find these jar files in the installation directory of NWDS:
    ...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
    ...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
    Regards
    Sebastian

  • EJB Design  Pattren For File Transfer Application

    hi,
    My requirement is Transfer of large files (around 300-500KB) across the network with a central repository.We looking at a Solution from J2EE With EJBs.
    At the Central Repository we are looking for ejb-Application Server. But the the issues i come acorss for my requirement are
    1.I need to store and access Files on the local hard Disk with ejbs
    >> But ejb spec won't allow to access the local file System
    2.Based on the certain rukes i need to forward the files to different location
    >> But ejb Won't allow to use Sockets in EJB.
    I Want to know is there any work around in EJB to meet my requirements.
    Any suggestions and ideas are welcome.
    Regards
    Srinivas

    Thanks For Your Feedback. I Will Explain my Requirement more elobarate.
    Our System Arch Looks like this
    The Current System
    |--MiniServ1--Client
    Source---Central Server--|--MiniServ2 --Clients
    | |--MiniServ3--Clients
    Data Base
    ------ Bidirectional Link
    Central Server --With database about all the transcations through the System
    Mini Serv*--with Storage info of teh files came to that Server
    Where Source / End Elients are Windows Based Clients(Developed in VC++)
    The File Size Transfering across different Sources is of Size around 0.5 MB.At the Central Server these Files Will be Stored on the local hard Disk.At Centarl Server based on Some Rules it will be routed through different Mini Servers(Mini Serv*).Mini Server Will Send the file to different Clients. After Working on the files the files will be send back to the central Server via the Mini Server*.At the Central Server we have the latest Copy of the File
    Currently Entire System Based on Windows and Central Server Built using COM Components Running on Windows 2000 Advanced Server.
    The Problem
    We Want to port the existing Sytem in java with out touching the Source and End Clients.We thought of replacing the Central Server with J2EE Application Serevr and COM Components with EJBS.But in Ejb we can't write to Local System and can't use sockets to send the files to MiniServers.
    Is there Any Work Around for the mentioned problem using java?

  • VBScript linking to SQL Database for file transfer information.

    I have been all over google and can't find anything that can use VBScript to look at an SQL database and based on what it contains, transfer files, I am not great with VBScript,
    still learning and at a BASIC LEVEL.  I can picture what I need but have no idea how to compose.
    The SQL database has 6 columns and I am trying to achieve the following.
    Database & Table : [FILE_TRANSFER].[dbo].[MAIN_FILE_TRANSFER_OUTPUT]
    Columns : [DESTURL1 ], [DESTURL2], [DESTURL3], [FullSource], [FullDestination], [DeleteFileAfterTransfer]
    Criteria required
    Does file exist within [FullSource]
    If yes Next if no, look to next [Fullsource]
    Does DESTURL1 exist No (Create) if yes Next
    Does DESTURL2 exist No (Create) if yes Next
    Does DESTURL3 exist No (Create) if yes Next
    Copy [Fullsource] to [FullDestination]
    (example : [Fullsource] c:\myfile.xls to [FullDestination] c:\thisismyfile.xls (Name change within [FullDestination])
    If [DeleteFileAfterTransfer] = Yes, delete transferred file [FullSource]

    TO extract SQL data to a file we would use BCP which is the main data extraction utility for SQLServer.
    Post you questions in the SQLServer forum and they will help you.
    There is no reason to use VBScript for this.  It is the wrong tool.
    ¯\_(ツ)_/¯

  • ABAP for file transfer

    Hi all,
    I'm looking for an function module to extract the data
    out of an internal table like the active table of an ODS to the BW server. I know the GUI_download, but it passes
    the data to the client.
    Any ideas.
    Cheers
    Pascal

    Hi,
    To write data to a file on the application server, use the TRANSFER statement:
    Syntax
    TRANSFER <f> to <dsn> [LENGTH <len>].
    Take a look on the following link.
    http://help.sap.com/saphelp_46c/helpdata/en/fc/eb3d35358411d1829f0000e829fbfe/frameset.htm
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

Maybe you are looking for