Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

Hi Recently i have upgraded developer 6i by applying patches.
After when i am trying to submit active users and active responsibilities.
Those also getting completed
But when i am trying to click button view output or view log
I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
Can anybody tell me what is the issue. Waiting for your reply
Ganesh

I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

Similar Messages

Urgent pls : sftp proxy service failing to get the file

Hi All ,
I have a proxy service polling for a file . I have setup the service on test environment , where it works fine . When i deploy the same code with only change is the Managed server target for polling , as the production server is clustered .
I get the following error in the domain log :
####<21-03-2013 18:08:59 CET> <Error> <SFTPTransport> <xxxx> <xxxxx> <[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-68CA827ADB4536852D4A> <11d1def534ea1be0:-5e793040:13ccb101998:-8000-00000000007dc42f> <1363885739466> <BEA-381803> <Unable to get file : /HOME/xxxxxx_00359.zip__2412735349618735005--5e793040.13d8cdd6ccb.7a58.stage on attempt number : 0 :
java.io.FileNotFoundException: /xxxx/xxxx/xxxx/ftp_files/download/xxxxxxx00359.zip (No such file or directory)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
     at com.bea.wli.sb.transports.sftp.client.SFTPClient.get(SFTPClient.java:389)
     at com.bea.wli.sb.transports.sftp.connector.SFTPResource.get(SFTPResource.java:112)
     at com.bea.wli.sb.transports.sftp.connector.SFTPPublishedTask.processFileDownload(SFTPPublishedTask.java:206)
     at com.bea.wli.sb.transports.sftp.connector.SFTPPublishedTask.process(SFTPPublishedTask.java:169)
     at com.bea.wli.sb.transports.poller.listener.PolledMessageListenerMDB.__onMessage(PolledMessageListenerMDB.java:52)
     at com.bea.wli.sb.transports.poller.listener.PolledMessageListenerMDB.access$000(PolledMessageListenerMDB.java:31)
     at com.bea.wli.sb.transports.poller.listener.PolledMessageListenerMDB$1.run(PolledMessageListenerMDB.java:41)
     at com.bea.wli.sb.transports.poller.listener.PolledMessageListenerMDB$1.run(PolledMessageListenerMDB.java:39)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.security.Security.runAs(Security.java:41)
     at com.bea.wli.sb.transports.poller.listener.PolledMessageListenerMDB.onMessage(PolledMessageListenerMDB.java:39)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
Note : I am able to manually sftp the file from and to my osb server . I am initiating the sftp session from osb server.
Any help on this in urgent basis is a lot of help . Thank you in advance.
Edited by: Harry1234 on 2013-03-22 03:46

Nop... The poller gets the file, but then publishes in a distributed queue, which means that any managed server can process it. Therefore, they need acesss to a shared file system.
http://docs.oracle.com/cd/E14571_01/doc.1111/e15022/config.htm#OSBDG176
Section 4.1:
"Oracle Service Bus load balances File, Email, and FTP transport processing across the managed servers in a cluster. All managed servers in the cluster should be able to access the Archive, Stage, and Error directories specified in any File, Email, or FTP proxy service configuration. These directories should be configured in a shared file system such as NFS. By using a shared file system, users and programs can access files on remote systems almost as if they were local files."
Regards,
Fabio Douek

Imovie error The project could not be prepared for publishing because an error occurred. (-50)

I can't export my imovie project.
Appears this message:
"The project could not be prepared for publishing because an error occurred. (-50)"
What can I do?

Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated.

Very very urgent : ERROR collaxa ProcessJob::execute Failed to connect

Hi ,
When am starting the Server with opmnstarll its not starting and giving the following error, if anybody
faced this before please reply the solution which you followed asap.
<ERROR> <collaxa> <ProcessJob::execute> Attempt (1/30) ... failed to connect ...retrying in 15 seconds
thanks
JR.

Hi,
I think this problem is described in http://download-uk.oracle.com/docs/cd/B31017_01/linitan.1013/relnotes/install.htm :
2.1.18 OPMN Configuration Assistant Fails during Installation on NFS Storage
While starting up the BPEL process, the Oracle Process Manager and Notification Server (OPMN) Configuraton Assistant fails and the following error message is displayed:
<2006-11-08 03:51:07,096> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888
<2006-11-08 03:51:22,099> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel <2006-11-08 03:51:37,124> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://144.25.145.91:8888/orabpel
<2006-11-08 03:51:52,127> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
<2006-11-08 03:52:07,131> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://localhost:8888/orabpel
<2006-11-08 03:52:07,132> <ERROR> <collaxa> <ProcessJob::execute> Attempt
(1/15) ... failed to connect ... retrying in 5 seconds ...
<2006-11-08 03:52:27,176> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888
<2006-11-08 03:52:42,179> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
<2006-11-08 03:52:57,182> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://144.25.145.91:8888/orabpel
<2006-11-08 03:53:12,185> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
However, this issue only occurs while installing the SOA suite on NFS/NAS storage.
To workaround this issue, set the timeout value to 1200 or higher in the opmn.xml file. Following steps describe how to set this value:
1.
Start the installation using runInstaller.
2.
Increase the value of start timeout to 1200 for the oc4j instance in the ORACLE_HOME/opmn/bin/opmn.xml file. For example,
<start timeout="1200" retry="2"/>
3.
Run root.sh to continue with the installation.
Regards, Gerwin

Error when executing FM in Target System for File to RFC flow

Hi,
I am doing File to RFC. I have given Dialog User(my user) login details in RFC reciver Comm Channel for Testing purpose.
I am getting the below error.
Receiver channel 'CC_P1EUNL_WRAPPER_RFC_Rcv' for party '', service 'INTEGRATION_SERVER_PID' (internal name 'RfcClient[CC_P1EUNL_WRAPPER_RFC_Rcv]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=001, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=iroy_adm, jco.client.sysnr=15, jco.client.ashost=pmichsappid01.app.pmi}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=001, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=iroy_adm, jco.client.sysnr=15, jco.client.ashost=pmichsappid01.app.pmi}
Current pool size: 0, maximum pool size : 1.
The message is showing as successfull but at node, its showing the above Message.
Let me know what could be the Problem.
Regards,
Varun

hi,
this is not an error - it's just RFC details message
Regards,
Michal Krawczyk

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Fail to open PDF file. Error for trying to paste in object.

So occasionaly, i will paste in a PDF into my InDesign document and this error will pop up, Fail to open PDF file. It's not like im opening
the file im just trying to paste it in. I try other pdf files and the same error comes up. Usually this error does not happen when i am pasting in
PDF's into my document but when one error comes up, no PDF's will work. I have to resave my file into another format and then it will work.
What is up with these errors that happen sometimes?
CS5 ID 7.0.3
P.C.

Try it again...this time click the show options check box in the place dialog.
Bob

Conf HTTP server getting error "failed to open memory file"

Hi,all,
Anyone has any idea what is happening here? Should the System Admin can help? or I should check my httpd.conf file?
Thanks,
Ken
====================================
Apache > bin/apachectl configtest
Ouch! ap_mm_create(1048576, "/oracle/app/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/logs/mm.8359") failed
Error: MM: mm:core: failed to open memory file (Permission denied): OS: No such file or directory
WARNING!! Direct use of apachectl within OracleAS is
deprecated. Using apachectl in conjunction with opmn may lead
to unexpected behavior (such as opmn automatically restarting
OHS after it has been shutdown using apachectl). Please use
opmnctl (located at ORACLE_HOME/opmn/bin/opmnctl) instead.
apachectl may not be shipped with future versions of OracleAS.
[16:15:23]
[ebizora01 8] Apache > ls -l logs/
total 17212
drwxr-x--- 4 oracle dba 1536 Jun 21 11:31 .
-rw------- 1 oracle oinstall 0 Jun 19 12:50 mm.3482.sem
-rw------- 1 oracle oinstall 1052672 Jun 19 12:50 mm.3482.mem
-rw------- 1 oracle oinstall 0 Jun 19 12:46 mm.3475.sem
-rw------- 1 oracle oinstall 1052672 Jun 19 12:46 mm.3475.mem
-rw------- 1 oracle oinstall 0 Jun 19 12:35 mm.3388.sem
-rw------- 1 oracle oinstall 1052672 Jun 19 12:35 mm.3388.mem
drwxr-x--- 16 oracle dba 512 Jun 19 11:05 ..
-rw-r--r-- 1 root root 4546 Mar 26 13:11 error_log.1174910400
-rw------- 1 root root 0 Mar 26 13:11 mod_oc4j.4395.shm.sem
-rw------- 1 root root 1052672 Mar 26 13:11 mod_oc4j.4395.shm.mem
-rw-r--r-- 1 root root 5 Mar 26 13:11 httpd.pid
-rw------- 1 root root 7405568 Mar 26 13:11 dms_metrics_4390.shm.mem
---Sr--r-- 1 root root 0 Mar 26 13:11 dms_metrics_4390.lock
-rw------- 1 root root 0 Mar 26 13:11 dms_metrics_4390.shm.sem
-rw------- 1 oracle root 0 Mar 26 13:11 mm.4390.sem
-rw------- 1 oracle root 1052672 Mar 26 13:11 mm.4390.mem
-rw------- 1 root root 0 Mar 26 12:32 mm.3468.sem
-rw------- 1 root root 1052672 Mar 26 12:32 mm.3468.mem
-rw------- 1 root root 0 Mar 26 12:30 mm.3465.sem
-rw------- 1 root root 1052672 Mar 26 12:30 mm.3465.mem
-rw------- 1 root root 0 Mar 26 12:28 mm.3451.sem
-rw------- 1 root root 1052672 Mar 26 12:28 mm.3451.mem
-rw------- 1 root root 0 Mar 26 12:26 mm.3444.sem
-rw------- 1 root root 1052672 Mar 26 12:26 mm.3444.mem
-rw-rw---- 1 oracle dba 477791 Mar 23 08:42 access_log.1174651200
-rw-rw---- 1 oracle dba 894031 Mar 23 08:42 error_log.1174651200
-rwxr-x--- 1 oracle dba 4180 Mar 23 07:37 ssl_engine_log
-rw-rw---- 1 oracle dba 476971 Mar 22 11:11 access_log.1174564800
-rw-rw---- 1 oracle dba 890666 Mar 22 11:11 error_log.1174564800
-rw-rw---- 1 oracle dba 478049 Mar 20 11:19 access_log.1174392000
-rw-rw---- 1 oracle dba 895811 Mar 20 11:19 error_log.1174392000
-rw-rw---- 1 oracle dba 478593 Mar 15 11:10 access_log.1173960000
-rw-rw---- 1 oracle dba 895242 Mar 15 11:10 error_log.1173960000
-rw-rw---- 1 oracle dba 478006 Mar 13 11:15 access_log.1173787200
-rw-rw---- 1 oracle dba 894983 Mar 13 11:15 error_log.1173787200
-rw-rw---- 1 oracle dba 1346 Mar 12 11:07 access_log.1173700800
-rw-rw---- 1 oracle dba 395 Mar 12 11:07 error_log.1173700800
-rw-rw---- 1 oracle dba 1288 Mar 9 16:42 access_log.1173484800
-rwxr-x--- 1 oracle dba 790 Mar 9 16:42 error_log.1173484800
drwxr-x--- 3 oracle dba 512 Mar 9 16:40 fastcgi
drwxr-x--- 2 oracle dba 512 Mar 9 16:40 oracle

my bad. my account was not oracle, so I did not have the privelleges to write to the directory.
This is fixed after su to oracle.
Thanks,
Ken

Error saying that windows failed to start 0xc000014c on my toshiba satellite A210

On my Laptop, a Toshiba A210, I get an error saying that windows failed to start. File:\boot\bcd status: 0xc000014c. i already put in a windows recovery disc and it still came up with this message. I removed the HDD and restarted the laptop, and it brang up windows install but it cancels that out before the install starts, even if i stick the HDD in after start-up.
Can anyone help me with this issue please?

Which A210? Which Windows? Which service-pack level?
Maybe you are resuming from hibernation? Press and hold the power-on button until the computer shuts off to get out of this state.
Maybe you have Windows Vista?
Error message when you resume a Windows Vista Service Pack 1-based or Windows Server 2008-based comp...
-Jerry

The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.

One of my replication job failed with below error, which means job failed because of permission issue on the folder. To resolve that, I have granted the permission and it started working fine. Now the question is as my job was running fine since long time
without any issue then how suddenly the permission of the folder got omitted automatically? I am sure that no one deleted the permission from the folder and as the server is part of SQL cluster no failover occurs.
Error:-The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.
Rahul

Hi Rahul,
Error code 5 indicates that the error is "access is denied." Please make sure that the COM folder is excluded from any antivirus scan that occurs on the system.
If the issue still persists, I recommend you use
Process Monitor to find out a bit more about the accounts and access requests involved. Then grant write permission to the exact COM folder for the account that is running the SQL Server Agent service. For more details, please review the following similar
thread.
http://www.sqlservercentral.com/Forums/Topic1364832-1550-1.aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

BDT-DC is not prepared for this application object

Hi,
I am getting this the error message:
BDT-DC is not prepared for this application object
when I try to create an extension.
I cam across the following thread:
EEWB
In this thread it is given:
Hi,
The xdcflag in the table TBZ1 needs to be set.
Please follow the steps mentioned below.
1. Start the transaction SM30.
2. Enter the name of the Table/View as V_TBZ1_DC.
3. Press the 'Maintain' button.
4. Double click on the Application Object you are trying to extend(for
e.g., BUPA)
5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
6. Save the data.
You can refer to note 955236.
When i follow the above steps it says that:
Do not make any changes (SAP entry).
Please Guide.
Regards
Shilpi

Hi Smita,
I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
Regards
Shilpi

-- Failed consistency check for this level

Hi guys,
I'm trying to validate a hierarchy, however, 1 level fails with that error message:
Level Name --> Failed consistency check for this level
I checked the column on physical layer - it has the same name and same datatype as the one in DB. The nullable flag is checked (there're no null values anyway). At the logical level - the key is created and it's the only level key at this level.
What could be a cause?
Thanks

Thomas,
since you've seen this before....did you have a problem doing "Estimate Levels" when you had measures in the hierarchy (usually they get there when you select a level for measure in its settings). I suspect the problem is in the measure - using FILTER function which references the dimension.
Thanks

Wireless: wpa_supplicant failed to open config file [SOLVED]

Hi,
I'm having trouble configuring my wireless network. At the moment I'm following the guide from the wiki, I can scan for networks but when i try to connect with wpa_supplicant I get following error:
Successfully initialized wpa_supplicant
Failed to open config file '/dev/fd/63', error: No such file or directory
Failed to read or parse configuration '/dev/fd/63'.
So far I've tried to google the problem, but haven't found a solution that works. I hope you can point me in the right direction.
Additional info:
'ip link' provide following output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wwp0s29u1u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 00:24:d7:af:98:dc brd ff:ff:ff:ff:ff:ff
4: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether f0:de:f1:53:66:eb brd ff:ff:ff:ff:ff:ff
And lspci:
lspci -k | grep Network
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
And dmesg:
dmesg | grep firmware
[ 2.379351] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 2.379368] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 2.382114] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 8.560626] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
I guess it have something to do with the firmware, but I'm not sure, as when I googled the problem I stumbled upon a site stating that the wireless card should be supported by the kernel.
Last edited by cube2 (2015-01-07 14:00:34)

Yes it is on the same line as this:
sudo wpa_supplicant -D nl80211,wext -i wlp3s0 -c <(wpa_passphrase "SSID" "key")
systemtcl list-units
systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/backlight/acpi_video1
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-drm-card0-card0\x2dLVDS\x2d1-nv_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-LVDS-1/nv_backlight
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2dLVDS\x2d2-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-2/intel_backlight
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 6 Series/C200 Series Chipset Family KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/rfkill2
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill3.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.1-tty-ttyACM0.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.3-tty-ttyACM1.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.6-net-wwp0s29u1u4i6.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.9-tty-ttyACM2.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged INTEL_SSDSA2M160G2LE 1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged INTEL_SSDSA2M160G2LE 2
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged INTEL_SSDSA2M160G2LE
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged MATSHITADVD-RAM_UJ8A2
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
sys-devices-platform-thinkpad_acpi-rfkill-rfkill1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill1
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-subsystem-net-devices-wwp0s29u1u4i6.device loaded active plugged F5521gw
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000.mount loaded active mounted /run/user/1000
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user jakob
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running dhcpcd on enp0s25
[email protected] loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
systemd-backlight@backlight:nv_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:nv_backlight
systemd-fsck@dev-disk-by\x2duuid-69c2b129\x2dd95a\x2d48f7\x2d84de\x2d058ba5f97b42.service loaded active exited File System Check on /dev/disk/by-uuid/69c2b129-d95a-48f7-84de-058ba5f97b42
systemd-journal-flush.service loaded active exited Trigger Flushing of Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill3
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
pstree
systemd─┬─chromium─┬─chrome-sandbox───chromium─┬─chrome-sandbox───nacl_helper
│ │ └─chromium─┬─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/662}
│ │ │ └─{WorkerPool/663}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ └─{OptimizingCompi}
│ │ ├─12*[chromium─┬─2*[{Blink GC Sweepe}]]
│ │ │ ├─2*[{Blink Heap Mark}]]
│ │ │ ├─{Chrome_ChildIOT}]
│ │ │ ├─{CompositorRaste}]
│ │ │ ├─{Compositor}]
│ │ │ ├─{HTMLParserThrea}]
│ │ │ └─{OptimizingCompi}]
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/155}
│ │ │ └─{WorkerPool/156}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/666}
│ │ │ └─{WorkerPool/667}
│ │ └─chromium─┬─{AudioOutputDevi}
│ │ ├─2*[{Blink GC Sweepe}]
│ │ ├─2*[{Blink Heap Mark}]
│ │ ├─{Chrome_ChildIOT}
│ │ ├─{CompositorRaste}
│ │ ├─{Compositor}
│ │ ├─{FFmpegDemuxer}
│ │ ├─{HTMLParserThrea}
│ │ ├─{Media}
│ │ ├─{OptimizingCompi}
│ │ ├─{WorkerPool/688}
│ │ └─{WorkerPool/693}
│ ├─chromium─┬─chromium
│ │ ├─{Chrome_ChildIOT}
│ │ └─{Watchdog}
│ ├─{AudioThread}
│ ├─{Blink GC Sweepe}
│ ├─2*[{Blink Heap Mark}]
│ ├─3*[{BrowserBlocking}]
│ ├─{BrowserWatchdog}
│ ├─3*[{CachePoolWorker}]
│ ├─{Chrome_CacheThr}
│ ├─{Chrome_DBThread}
│ ├─{Chrome_FileThre}
│ ├─{Chrome_FileUser}
│ ├─{Chrome_HistoryT}
│ ├─{Chrome_IOThread}
│ ├─{Chrome_ProcessL}
│ ├─{Chrome_SafeBrow}
│ ├─{Chrome_SyncThre}
│ ├─{CrShutdownDetec}
│ ├─{IndexedDB}
│ ├─{LevelDBEnv.IDB}
│ ├─{LevelDBEnv}
│ ├─{NSS SSL ThreadW}
│ ├─{NetworkChangeNo}
│ ├─{OptimizingCompi}
│ ├─2*[{Proxy resolver}]
│ ├─{WorkerPool/1890}
│ ├─{WorkerPool/1936}
│ ├─{chromium}
│ ├─{extension_crash}
│ ├─{gpu-process_cra}
│ ├─{handle-watcher-}
│ ├─{inotify_reader}
│ ├─{renderer_crash_}
│ └─{sandbox_ipc_thr}
├─2*[dbus-daemon]
├─dbus-launch
├─dhcpcd
├─login───startx───xinit─┬─Xorg.bin─┬─xf86-video-inte
│ │ └─{Xorg.bin}
│ └─awesome───{gmain}
├─systemd───(sd-pam)
├─systemd-journal
├─systemd-logind
├─systemd-udevd
├─xterm───bash───pstree
└─xterm───bash

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Build and Capture TS fails in "Prepare Configuration Manager Client" task

I have a ConfigMgr 2012 R2 + CU1 I use for Windows 7 deployment.
I have made a "build and Capture" TS in ConfigMgr that I use to build my reference image.
When I run the TS it fails at the "Prepare Configuration Manager Client" step where I get the following error:
The task sequence execution engine failed executing the action (Prepare Configuration Manager Client) in the group (Capture the Reference Machine) with the error code 2147749938
Action output: ... 1 instance(s) of 'SMS_MaintenanceTaskRequests' successful
Successfully reset Registration status flag to "not registered"
Successfully disabled provisioning mode.
Start to cleanup TS policy
getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=80041032 (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,463)
ns.Query(sQuery, &spEnum), HRESULT=80041032 (e:\qfe\nts\sms\framework\tscore\utils.cpp,3666)
End TS policy cleanup
TS::Utility::CleanupPolicyEx(false), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,564)
pCmd->Execute(), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)
Wmi query 'select *from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0x80041032
Failed to delete policies compiled by TaskSequence (0x80041032)
Failed to prepare SMS Client for capture, hr=80041032
Failed to prepare SMS Client for capture, hr=80041032. The operating system reported error 2147942402: The system cannot find the file specified.
If I disable the "Install Software Updates" part of my TS it will run without probems. It installs 154 updates during the build.
I have seen another reference to this problem on this forum but why should the large number of the updates be the reason why the task sequcens cannot prepare the SCCM client for capture.
Sounds to me that it's a BUG :-(
Thomas Forsmark Soerensen

I'm glad I'm not the only one running into this. I've been racking my brain for the past few days trying to figure out where I went wrong.
SCCM 2012 R2 CU1
Installation properties in TS: SMSMP=mp.f.q.d.n FSP=mp.f.q.d.n DNSSUFFIX=f.q.d.n PATCH="%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2882125\Client\x64\configmgr2012ac-sp1-kb2882125-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2905002\Client\x64\configmgr2012ac-r2-kb2905002-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2938441\Client\x64\configmgr2012ac-r2-kb2938441-x64.msp"
Drop Windows 7 WIM that has all the updates Schedule Updates (offline servicing) installed (169 of 277)
Apply several updates offline (the dual-reboot Windows 7 updates among others)
Run Windows Updates more than once to be sure I get everything
Breaks at the preparing client for capture step
Is this:
a bug?
a known issue
something that's just frowned upon for no technical reason?
I'd love to hear from an SCCM guru [at Microsoft] on what the heck is going on here.

Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

Similar Messages

Maybe you are looking for