Alert file !!!

Just created the new db with
CREATE DATABASE ... .command
Created TSPs with Create TSPs command.
However
Oracle did not have the alertSID.log file in bdump
dir.
Change the permission.group and owner to
777 oracle:oinstall .
Started and shutdown the dbase again.
However, oracle does not seem to write anything to alert log file.
From
P

Hi,
Verify the bdump directory :
SQL> show parameter background_dump_dest
NAME TYPE VALUE
background_dump_dest string E:\oracle\admin\demo9i\bdump
SQL> Nicolas.

Similar Messages

Can't open ALERT file error in 10G

We just converted to 10G 2 weeks ago. The alter file was where it was suppposed to be until a couple of days ago. Now I am getting this message and have no alert file. I have tried shutting down the db and restarting, to no avail. Archiving is working normally as is everything else that I can see. The bdump location in the pfile shows correct, bit doesn't match what the error message is saying. This error message comes from the lgwtr trace log.
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2
I am also getting these dbverify logs in 10G, during startup. Any insight would be helpful. Thanks.
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
DBVERIFY: Release 10.2.0.4.0 - Production on Fri Sep 19 00:50:02 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBVERIFY - Verification starting : FILE = /u02/oradata/PROD/indx_PROD_09.dbf
DBVERIFY - Verification complete
Total Pages Examined : 128000
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 61172
Total Pages Failing (Index): 0
Total Pages Processed (Other): 2601
Total Pages Processed (Seg) : 0
Total Pages Failing (Seg) : 0
Total Pages Empty : 64227
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
Highest block SCN : 1048904582 (0.1048904582)

user10278327 wrote:
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2As you can see the bdump location is different in these two messages. above and below
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
Which one is correct?
Since you are on 10g you are most likely using spfile instead of pfile, so login to database
sqlplus / as sysdba
do
show parameter spfile
show parameter background_dump_dest

Weird : Database Hangs without any message in Alert File

Hi
We have production database 10.2.0 , in the last 3 days database database has to be restarted as it hangs without any information in the Alert File.
No trace file is genrated at that time.
Only SYS user Can LOGIN to the database.
I had no other option but to restart
Database is in NO ARCHIVE MODE
There is Enough Space in Temporary Tablespace and all other tablespace.
NO patches were applied to the database
NO parameters has been modified
When i check the CPU usage its normal.
There is Enough Disk Space.
This is procution and i apreciate Help.
Thank You

user6421665 wrote:
Only SYS user Can LOGIN to the database.
What is the OS ? Windows --> Did you check virus scan or some other process running during that time ?
Unix / Linux --> Is sysadmin running a defrag on the disks or some other OS Utility ?
Do you login as SYS from the server ? Can you login as any other user from the server ?
Hang == Slow ?
>
This is procution and i apreciate Help.
Production database in NOARCHIVE log mode... is interesting by itself, but that is not a question here.

Error in alert file

Please tell me I am recieving this message in alert file Oracle DataGuard is not available in this edition of oracle
Thanks

Hi
Data Guard Is Available with ORACLE 9i onwards. Socheck with the version of ur Database with the help of following command.....
SQL> SELECT * FROM V&VERSION
Thnx & Regards
Sunil

Errors not appearing in alert file

Hi,
Just getting my first experience of Oracle on Windows. The application I am supporting is getting ORA-04030 errors, which we are now investigating, but my question is why these errors were not written to the alert file for that database?
My usual platform is unix, where although I have not seen ORA-04030 errors, I have seen ORA-4031 which I'm sure gets written to the alert file.
Thanks

Hi,
You may not get ORA-4030 in the Alert log as it for system level resource issue, so it should appear at run time for new processes trying to create new processes and are requesting memory. The existing running database processes does not get impacted when they already have memory allocated.
04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
// *Cause: Operating system process private memory has been exhausted
// *Action:
Not all ORA errors reported on alert.log file. Some of the ORA errors are reported only on client side. This error will be reported on alert.log if any of the oracle server processes is not able to allocate memory.
HTH
Edited by: skvaish1 on Jan 21, 2010 10:08 AM

Message in standby alert file

I am recieving this error messgae in standby alert file. Any one have idea about this message
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
Thanks

According to metalink Note:352388.1:
>>
Cause:
Additional M000 slave processes cannot start
Solution:
Increase value of the repository database 'processes' parameter. Ensure
it is set to at least 150.
>>

When will ora-01555 error not be recorded in alert file?

Application side repeatably gets ora-01555 error, but from alert log, there is no such error recorded. I recalled normally this error will be recorded, so under which condition we can't find this error in alert file?

You would get ORA-0155 on a LOB if
a) the LOB storage has been defined with PCTVERSION which is low (Oracle doesn't use Undo Segments but uses space in the LOB Segment itself and if this is inadequate for multiple updates, an ORA-0155 is raised, which is not really related to Undo Segments but the space in the LOB segment)
b) the LOB storage has been defined with RETENTION which is low
(Even if you increase undo_retention, you'd have to modify the LOB segment to PCTVERSION and then back to RETENTION for it to use the new undo_retention value).
See MetaLink Notes 162345.1, 66431.1 and 563470.1
Since the ORA-01555 error doesn't really relate to Undo segments, I believe that it would not be reported in the alert.log file -- but I haven't verified this.
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to monitor Alert file large in EM Grid

Hello,
In Enterprise Manager 9 we used to monitor Alert File Large.
I am not able find this in Grid Control.
Can anybody tell me how to monitor this metric in OEM 10 GRid?
Best regards,
Jvries

You must to select the host target and metric and policy issues
Select all metrics and search File or Directory size MB
You can to add the file when you want to monitor the size and
you must to enable a response action when the critical theshold appear
The response action must be a shell script like this
#/bin/ksh
#if you want backup
cp /directory/file.log /backup_destination/file.log.bak
#for clean the file and his size was empth
/directory/file.logRemember that you want enable the credentials for host and the owner of agent had rights of read and write in the location of file
Regards

How rman backup messages printed in alert file?

surprised how the messages of rman getting printed in alert file?
i am using 10.2.0.4 on AIX and using veritas net backups.....from rman.....
ORA-19624: operation failed, retry possible
ORA-19506: failed to create sequential file, name="c-1650503797-20091118-0c", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:

Raman wrote:
Well. i agree. we have logs to capture media backups....so wanted to cut only these media backups failure out of alert file...else what is happening here is our monitoring reports these as alerts as already we know from media backup logs...So why not modify your monitoring of the alert log to exclude that particular error?
Personally, I'd allow both systems to continue to report the error from their perspective.
>
in nutshell...just exploring any options to turn off the media backup failures like any rman parameters or can anything to do with veritas parameters?
Anyway thanks to all for your valuable opinions.
Thanks,
Raman.

ALERT FILE FOR LOCKS

HELLO EVERYBODY
I want to see the alert file for locks held by users;
where could i find it in oralce folder?
Regards

Lock information is held in views in the database, not in a log file.
select * from dba_locks;

Alert file entry: Load Information not supported by OS!

I get the following alert file entry every 30-60 seconds with any database I create with Oracle8.1.5i on RedHat6.2:
Load Information not supported by OS!
The entry appears to relate to PMON and (eventually) causes the creation of PMON derived trace files.
Can anybody help?

Thanks Kristian, your solution is totally correct.
About a day after you posted your advice, I finally managed to get our Oracle support info from our Oracle reseller, and they have advised the same thing. Apparently, this is a known bug.

Alert file creation in SAP PI

Hi Friends,
We have a tricky requirement as follows:
There is a third party system to which the error messages and alerts that are generated in SAP PI needs to be sent as text file or via SOAP.
Whenever, Adapter Errors or Mapping Errors occur a log needs to be written/sent to the 3rd party server.
For ex: If an error occurs in the Message Mapping step, then the error information/alert needs to be sent to the 3rd party system via a file or soap.
The 3rd party server does not support SMTP or other mail protocol. It wants to receive error data information as xml or flat file or soap.
Can anyone please guide if this is possible and how?
Thanks,
Souvik

I mean to say in the PI box create a report.
Below links would help you for your report.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b050ff4f-84c3-2b10-3d99-8f9c44f57a17
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT

Alert file creation in PI system

Hello Experts ,
We have a requirement that we need to create one file in our integration server path.
Please let me know is there any standard sap program which will take the value from the alert table at run time ?
If we dont have any such program please let me know the table names from which I need to fetch the data to get all the error information both ABAP stack and JAVA stack ?
Thanks in advance for your help.
Regards,
Somenath

you can create aleart file by abap program,
when error occur in pi , alert is arise in alert rule -> alaertcategory,
you can call abap program after alert. set in tc:alertcatdef.
please search more in sdn, I ll find and success what you want to do.
Naoki

Data pump message in alert file

Hi Experts,
expdp system/testl@test full=Y directory=EXP_DIR2 dumpfile=testdatabase_02262009.dmp logfile=testexp_02262009.log
I useabove syntax to full export with Job "SYSTEM"."SYS_EXPORT_FULL_01" successfully completed at 13:49:00
However, I saw below message in alert as
Thu Feb 26 11:48:12 2009
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=30, OS id=4184
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_FULL_01', 'SYSTEM', 'KUPC$C_1_20090226114812', 'KUPC$S_1_20090226114812', 0);
Thu Feb 26 11:56:12 2009
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=31, OS id=3596
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_FULL_01', 'SYSTEM', 'KUPC$C_1_20090226115612', 'KUPC$S_1_20090226115612', 0);
Thu Feb 26 13:47:38 2009
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=19, OS id=3712
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_FULL_01', 'SYSTEM', 'KUPC$C_1_20090226134739', 'KUPC$S_1_20090226134739', 0);
kupprdp: worker process DW01 started with worker id=1, pid=22, OS id=3984
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_FULL_01', 'SYSTEM');
Are there some issue for my full export?
Thanks explain
JIM

user589812 wrote:
Yes. That paper makes expalain system monitoring info inalert file.
But I did not find message mens about The value (30) of MAXTRANS parameter ignored.
It seems that system skip something....
JImSKU's metalink doc has the answer
DataPump Export/Import Generate Messages "The Value (30) Of Maxtrans Parameter Ignored" in Alert Log
Doc ID: 455021.1
It's actually a non harmful bug, Since 10gR1 the parameter MAXTRANS is obsoleted but master table of data pump is created with it.

Calendar lost all alert files when I upgraded-..

Hello,
I use a LOT of events in Calendar that run either Applescript apps or Automator alarms.
Since I updated to Mavericks, it seems that all of the pointers to the app files are gone.
When I go in to re-establish the links to the files to "open" (Alert->Open File->"other".......)
Sometimes when I click "other", a window will open for me to navigate and select the file. That is how it should work. yay!
Except many times when I click on "other", nothing happens. If I click okay, then the default of Calendar is saved (so when the alarm fires, it opens Calendar). If I click Cancel, the whatever the default alert action (sound.....) is what is saved.
When the alarms that I have been successful about fixing do fire, they work as they should (run the applescript or automator workflow). That is good.
This seems to be specifically a Calendar issue, as most other things are working as they should.
Except a folder action to rename files dropped on it.
But that is for a different thread.
Any assistance or suggestions or insight into how to fix my Calendar would really be appreciated. My entire operation is dependent on the calendar running the Applescript or Automator apps.
Thank you very much!

No help here, but I'm having something similar to this. When I create a new Open File Alert with an Automator Calendar Workflow as the target, the alert vanishes from the event a few seconds after I save it.

Alert file !!!

Similar Messages

Maybe you are looking for