Alert Message When Data Load Fails

Hi Friends,
I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
thank in advance
sam

hi Sam,
welcome to sdn ...
you can add 'create message' by right click the process type, this will lead you to mail sending setting.
see thread
Getting Failed process chain info through email
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
you may need to setup sapconnect for email, take a look
http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
hope this helps.

Similar Messages

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
2nd Error message:
The following data ranged failed to refresh: ExternalData1 - Continue to refresh all
How do I resolve this? Trying to connect to Oracle DB environment 12C

What will happen if you rebuild the PivotTable/Table ?
Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
Wind Zhang
TechNet Community Support

Regarding the alert Message when i try to close the window

Hi All,
I am trying to give the alert message when the user tries to close the window.
For this i have coded a jsp in which i have written
<html>
<head>Test in the Page Ajay</head>
<body onUnload="alert('Test UnLoad')">
</body>
</html>
and in the portalapp.xml i have given as jspnative.
then if i try to unload the page the alert message is not executing.
Plz help me out in this.
Thanks
Ajay

Delete the iPod photo cache, as described here:
http://support.apple.com/kb/ts1314

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

Changed my version of acrobat from 8 to X Pro, now I get this message when down loading an acrobat file.

Hi I changed my version of acrobat from 8 to X Pro, now I get this message when down loading an acrobat file. I tried to create a new down load folder, did not help. Cannot find where tochange the association in preferences.
C:\DOCUME~1\Owner\LOCALS~1\Temp\Image Honda MPR Oct - Dec 2011-2.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences.
Thanks,
[email protected]

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Data load failed at infocube level

Dear Experts,
I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
Error 18 in the update
Diagnosis
    The update delivered the error code 18 .
Procedure
    You can find further information on this error in the error message of
    the update.
Here I tried to activate update rules once again by excuting the program and tried to reload using reconstruction fecility but I get the same error message.
Kindly, please help me to analyze the issue.
Thanks&Regards,
Mannu

Hi,
Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
1. the data load status in RSMO is red but where as in the data target the status is showing green
2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
Following analysis is from Tcode ST22
Runtime Errors         GETWA_NOT_ASSIGNED
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLSLVC" or "LSLVCF36"
    "FILL_DATA_TABLE"
Here I have activated the include LSLVCF36
reactivated the transfer rules and update rules and retriggered the data load
But still I am getting the same error...
Could any one please help me to resolve this issue....
Thanks a lot,
Mannu
Thanks & Regards,
Mannu

Automate email notification when data package fails

We have an transaction data load from BI to BPC using data manager. We have automated it to run once in a day by scheduling the data manager.
But this load some times fails when the master data maintainance is not done.
Can we send an e mail (with error message) to the user if the load fails for some reason. Presently, we need to go to the view status and find out the issue message.
Thanks,
Swetha

Hi,
I was refering to the How to documetn - "HOW TO EMAIL A BPC DATA MANAGER LOG TO A TEAM - FILES".
Donu2019t we require any configuration settings for this? The document does not mention any thing about this. Please suggest.
Also, kindly let us know if there is any updated version of this as we are on 7.5 version.
Not sure how to reach "rich heilman" (author) directly. Rich, please suggest on above
Regards,
Swetha

Message while data load is in progress

Hi,
We are loading the data in the infocube every day twice i.e in the morning and the afternoon.
Loading methodology is always delete and load. At any given point we have only one request in the cube. Data Load takes arround 20-30 minutes.
When the user runs the query during the data load, he gets the message 'No Applicable Data Found'. Can anyone please advise, how do we show the proper message like 'Data is updating in the system..Please try after some time...' etc.
We are using BEx Browser with a template and a query attached to the template.
Please advise.
Regards
Ramesh Ganji

Hi,
Tell the time of the data load to the users so that they are aware that the loads are in progress and data will not be available for reportting as of now and prohibit themselves from running the report give a buffer time of around 15-20 mins as there might be some issue some where down the line. Ask them to run the report other than the time data loads are happening
You could also reschedule the timings of the process chain to finish before the users comes in.
As far as the functionaly you are referring to i am not sure if we are able to acheive this..
Regards
Puneet

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

Master data load failed

Hi Experts,
One of my master data full load failed, see the below erro message in status tab,
Incorrect data records - error requests (total status RED)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target.
The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
can any one please give me solution.
Thanks
David

HI,
I am loading the data from application server, i dont have R/3 for this load. and the below message is showing in status tab;
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
Thanks
David

Data load failing in update rules

Hello All and happy New Year!!
Please provide assistance to solve this error - a full data load into an InfoCube is failing in the update rules with the error ABORT was set in the customer routine 9998".
Your assistance will be highly appreciated.
Regards,
Keith

Hi Keith,
You need to check the start routine in the update rules...this is what the message is referring to. You can also debug the update rules if you like...in the debugger screen search for 9998 to get to the Start Routine code.
Hope this helps...

Time dependant Master data load fail (Invalid time interval)

Hi,
I have IO 0HRPOSITION which is time dependant master data.
When I load master data I have maintained from date 01.03.2007 to end date 01.12.999 in scheduler.
But there are some positions records in HR system which have from date less than 01.03.2007 and because of that master data load is failing everyday.
How I can load only those records which fall in-between from date 01.03.2007 to end date 01.12.999???
Thanks
Pramod

Hi Pramod,
I think you can put a selection in the Infopackage.
Thanks

Error Message after data load (error is "1130610")

We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Need alert message when closing the file

Hi friends,
One of my friend has an forgetting habit, always forgets some important things to check before delivering the files. So thought of developing some scripts for him and did a couple. He was happy with that but still not upto the mark. The scripts I gave needs to click in the scripts panel. He still forgets to click the scripts in the rushing deadlines. This time I am thinking of something but I have no solution/answer. I'm planning to give an alert message box whenever he closes/exits the file. That is when he is done with the job and he says Ctrl+W or File-Close or Exit, he should see an alert message to check some things which are really imporatant. Writing scripts needs to click them, which he is missing in rush deadlines.
So can we create anyscript which is attached to the system close command? or Edit the default system close command so that he will not miss anything? I know this is crazy but just want to help him.
Your help is really appreciable!!

in CS3 you can use Event Listener
and example of AfterSave
http://www.adobeforums.com/webx?128@@.59b4b8e6
robin
www.adobescripts.com

Alert Message When Data Load Fails

Similar Messages

Maybe you are looking for