Alert on a variable without BPM

Hello,
I have implemented a Idoc-PI-File scenario to integrate ECC to ESourcing.
I have implemented basic alert with the help of SAP ABAP table.
I want to trigger alert on a specific variable/field of the payload.
I can do that with the help of BPM. Is it possible without BPM?
Kindly reply.
Thanks & Regards,
Vishal K

Hi Vishal,
As mentioned in the blog /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function, alerts can be triggered from UDF.
In PI7.1, alerts can be triggered by using "RFC Lookup" standard function instead of UDF. SALERT_CREATE need to be used in the "RFC Lookup" standard function of Graphical Mapping. Refer this blog to work on RFC Lookup: http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457
Regards,
Geetha

Similar Messages

Alerts with variables from the messages payload without BPM?

Hi, experts:
Is it possible to define a alert category with variables from the messages payload(for example:order_id ) without BPM?
Regards
Yu Ming

Refer to
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1240902,00.html
initially this also talk about BPM but you can check whether you can use the container variable in you case.
How to define the container variable in ALRTCATDEF is mention in above link.
**Points if answers find useful.
Gaurav Jain

Reg Alerts using with & without BPM.

Dear Experts,
The flow of the inbound message is Customers>( Seeburger Adapter which receives the message and passes to the integration of XI CENTRAL HUB) CENTRAL XI HUB> XI HUB-->SAP System and the out bound is viceversa.
1. A Message failed with the Mapping Exception Error in the SXMB_MONI of the CENTRAL XI Hub. An alert should be raised for thsi error in the form of email..how this can be done WITHOUT BPM ? or WITH BPM ?
2. How to integrate This type of alerts with with Tivoli to raise a ticket with the support team ?

Hi,
How you checked acknowledgment for IDOCs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
For proxy acknowledgment please refer to help.
Best regards,
Wojciech

Trigering alert without BPM

Hi,
I can trigger an alert when we get an error message .
I would like to trigger an alert without BPM when we receive an acknowledgement succesfully from the legacy system.
Thanks,
Sharmila

Hi,
go through this links...
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
regards,
Ansar.

Exception handling without BPM

Hello,
I have done exception handling with BPM.
i.e. when there exception comes in mapping I have use Block Exception Handler.
Can this be done without BPM.
Please snd me blog for it.
Regards

Hi,
As explained by Michal it is correct, but in message mapping , we can raise an alert .
See the below links
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Regards
Chilla

How to handle system exception in Sync communication without BPM? Help!

Hi Experts
   I have a Synchronous scenario in XI: webservice <------>RFC SAP R/3.
Webservice is making a sync call to RFC FM in SAP R/3 system.
   I want to handle system exception when SAP R/3 is down and send an email alert.
   Can I achieve this in graphical mapping without BPM? How? Kindly provide necessary steps/screenshots for the same.
   Are there any other alternatives for handling system exception apart from mapping and BPM?
Thanks
Gopal

Hi GopalKirshna,
      Yes,You can handle the Exception if at all you are using the RFC.You can achieve this without using BPM.
   Using Fault message you can catch the System Exception and even the primary role for Fault Message is to catch the RFC Exceptions.
   Please refer the Fault messages Notes to achieve this you will understand better.
Hope I am clear.
Please let me if you have any more queries regarding this..!
Thanks and Rewards,
Chandu.

SOAP-XI-RFC sync without BPM scenario: How to catch timeout exception in PI

Hi all
I made a scenario where a Webservice request was placed via XI to RFC in CRM.
This is all done without BPM.
Now the request came up that I have to handle undhandled exceptions from RFC such as Fatal Error, Dump in CRM etc in PI so that customer can get the idea of what happend in the Backend rather PI failing in the monitoring. I did that in CRM by catching all the exception and sending a common error message to PI.
But another requirement is to handle Message Timeout of the RFC in PI for e.g. If the request goes to the RFC and due to the volume of the data, it gets Timed Out then neither PI nor CRM can handle this and it results in PI failing to catch this excpetion.
I tried Fault message type but that does not help either.
Can I get some expert advice.
Regards
Naina

Include your Send_to_RFC step inside a Block...have a deadline branch for this and an Exception Branch....in deadline branch have control step (thro Exception)....in Exception Branch have a Mapping and a Send Step....this mapping will produce a message (define separate DT for this) having constant values (like timeout occured message)
If you are fine with alert message...then instead of Mapping and Send step in Exception include a Control Step (thro alert)....alert message can be "timeout occured in receiving RFC response"
Regards,
Abhishek.

Catch exceptions without BPM

Hi everybody,
we got a lot of BPM just because of exception handling.
In most cases incoming IDOCS are transformed and send to different backend-systems.
In our exceptions branches we generate IDOC type SYSTAT to inform the sending R/3 about a error.
Do you see a workaround without BPM?
Thanks Regards
Mario
Message was edited by:
Mario Müller

Hi,
Here's what you may be able to try:
1. When error occurs raise an alert through the RWB.
2. Configure the Mail Adapter to poll the mailbox for this alert
3. Set up the necessary repository/directory objects to process the alert message from the Mail Adapter to the IDOC type you require to alert an error has occurred.
This way you can do away with the BPM altogether.
If you want slightly different processes for system error and mapping error - then set up 2 different alerts for the Mail Adapter to process.
Hope this helps.
Cheers
Colin.

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean     Local Enterprise Bean     1
CallSapAdapter     Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean Local Enterprise Bean     3
Module configuration:
1     PassThrough     true
3     receiverChannel     <FilereceiverCCname>
3     receiverService     <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

File sender adapter:FILE to IDOC without BPM, can't see in SXMB_MONI.

Hi all
I have a FILE - XI - IDOC Async scenario without BPM.
I configured FILE sender adapter and IDOC receiver adapter. I made a mapping to transfer file data to the structure of IDOC.
Now when i am trying to load the file using command prompt, i cud see nothing in the monitoring. Whereas if i go to the communication channel monitoring of runtime workbench, i saw that CC is polling correctly and was reading the file also.
And also wen i saw in the processed folder which i mentioned in the CC configuration for the ARCHIVE DIRECTORY, i saw that file got transferred to the folder also.
I don't understand why i cant see anything in the monitoring.
Could anybody help me to rectify the problem. Is there anything i m missing ?
Regards
Naina

Rajesh/Amar
TCode:: SXMB_ADM->Integration engine configuration->specific configuration->runtime
Trace_Level = 3 then you can get all MONI PIPELINE Steps also
I did this change but cudn't see anything in SXMB_MONI.
This is how i have configured my process:
http://wiki.sdn.sap.com/wiki/display/XI/FiletoMultipleIDOCSplittingwithoutBPM
But instead of IDOC splitting i have simple FILE - XI -IDOC scenario.
I have configured everything exaclty the same way it is mentioned here. But for me the process is not visible at all.
I can't even see the first request message in the monitoring.
This is the message i can see in the communication channel monitoring:
2010-05-24 09:07:41 Success Channel CC_*: Entire file content converted to XML format
2010-05-24 09:07:41 Warning Channel CC_*: Empty document found. Proceed without sending message
2010-05-24 09:07:41 Success File "/xyz/ABC.txt" archived after processing
Is there any problem with the file and that could be the reason it cant convert the file to the request message MT_REQUEST and thus am not able to see anything in monitoring.
help me guys....this is a simple process and i m stuck...its frustrating
Regards
Naina

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

Sync/Async communication in JMS adapter without BPM

Hi,
as of SP19 XI's JMS adapter offers this new feature for Sync/Async communication through JMS Adapter modules instead of using a BPE.
Now I would be interested to know if anybody has already successfully used this feature especially using WebSphere MQ as a JMS Provider (preferredly in the mode JMS Compliant: WebSphere MQ (non-JMS)).
I experienced some issues with the XI Message ID being used as the JMS Correlation ID which is then mapped to the MQ Correlation ID being truncated after 24 characters. So I don't exactly know whether this is due to wrong setup or some general issues with this messaging system.
Please let me know if you have any experiences at all with this new feature (please do not just post links to the following blogs, which I have thoroughly studied as well as the How-to Guide concerning this topic)
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
thanks & regards,
Peter

Hi Peter,
we working on the same Problem. Using IBM Websphere MQ as JMS Provider for the new feature: sync/async bridge without BPE.
we switched on a high level trace for the adapter framework and saw a problem in the receiving Object of the JMS correlation id. The notify bean receives the JMS correlationid in hex format. so the beans have two different correlations, which could not find together.
did you have any solution to get this new feature works with IBM Websphere ?
thanks
joachim

N:1 mapping without BPM

Hi All,
Is it possible to do N:1 mapping without BPM in PI 7.1 ?
Thanks and regards
Uma

Hi,
>Yeah, It is possible.
how can it be possible based on ANY requirement ?
you just cannot receive many messages into PI and bundle them into
one without BPM - and this is final
can you tell the way if you know how to do it without a BPM
in any (even very specific) scenario ?
thanks,
Regards,
Michal Krawczyk

Alert on a variable without BPM

Similar Messages

Maybe you are looking for