Alerting on AE errors without configuring CCMS

Is it possible to Alert system errors in the AE (after it goes thro' WAIT, etc) via ALM and not having to go through CCMS?
Thanks, Pam

Hi,
"Wait" and "To be delivered" is not captured by ALM because they are not alert. I am not sure even if CCMS will report "Wait" status.
Regards,
Gourav

Similar Messages

Error while configuring CCMS Agent

Hello Gurus,
I am trying to install CCMS agent on our BI Dev system, but it gives me below error.
Error Message -
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH: CCMS mo
nitoring segment belongs to a non-ABAP instance.
SAPCCM4X of release 7.00 is to be used only to monitor ABAP instances of kernel
release 7.00 (NW04s) or 6.40.
EXITING with code 1
Error Message -
I am trying to run the command S:\usr\sap\SID\SYS\exe\uc\NTAMD64>sapccm4x.exe -R pf=S:\usr\sap\SID\SYS\profile\profile_name
I have downloaded the file as discribed on the help.sap.com link
http://help.sap.com/saphelp_nw70/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
I have configured CCMS Agent on our ERP Dev system, but on BI/BW I am getting this error.
Could you guys please help me on this.
Best Regards,
Amit Vaij

Perhaps your BI system is dual stack, or even java only?
In that case you should install the sapccmsr agent (as well).
Regards,
David

How to set Report Location by RAS SDK without configurating CCM in CR Serve

Dear all
When I use the RAS SDK with CR Server Embedded 2008, I found that when I use the Java code to open a report like below:
String localRptPath = "rassdk://C:
oem.rpt";
reportClientDoc.open(localRptPath,OpenReportOptions._openAsReadOnly);
But I must set the Report Directory from the default value(a specified location after CRSE installation)to " * " in CCM of the RAS Server like below:
Right click the RAS Server -> Choose "Propertites" -> Choose "Parameter" -> Change "Option Type" to "Server" -> set the Report Directory from the default value to " * "
Then I can open the report, otherwise I must put the report under the Default Location of the Report Directory.
So customer need a way which can set the report location directly in RAS SDK and without configurating the Report Direcroty in CCM?
Thanks in advance.
David

Dear all
I encounter some strange situation when editing the "Report Directory":
In my Vmware, there are 2 "ReportDirectoryPath" under:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Instances\bouser.RAS\Server\LocalConnectionMgr
and
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Server\LocalConnectionMgr
I can only edit the "ReportDirectoryPath" in the former location and then take effectively in the CCM. And if I modify the "ReportDirectoryPath" in the latter location, it can not take effect.
But in customer machine, customer install CR2008 and CRASE2008, and customer can edit the value in the registry, but after customer uninstall the CR2008 and CRSE2008 then reinstall CRSE2008 only, the registry structure is different, there is not HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Instances\bouser.RAS\, so customer can only edit the "ReportDirectoryPath" under:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Server\LocalConnectionMgr
And it can work effectively.
And I can not rebuild this.
So I found that when there are 2 location of the "ReportDirectoryPath", I can only modify it under:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Instances\bouser.RAS\Server\LocalConnectionMgr
So my question is:
Why the registry structure is different after reinstall the CRSE2008?
Because customer need the firm registry location to modify it.

CCMS - Alert for Email-Errors in the SOST

Hello everybody,
is there a way to set an Alert in the CCMS for checking Email sent with errors from the transaction SOST?
We´ve also connected an externe Fax Programm: this service is build over a RFC and functions successfully. We´d like to check all faxes with errors in the CCMS Monitoring, too.
In our SCOT the Node for the SAPConnect was already activated:
- Utilities - Alert Monitoring - Start Data Collection Method:
Data collection method for SAPconnect ran with no errors.
Now i can see it:
- Utilities - Alert Monitoring - Display - SAPConnect.
Into my custom Monitor i´ve put a MTE SAPconnect node, with name:
- ACTIVE
RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
What does this error mean? How can i easy configure the monitoring of the SOST?
Do i have to create a custom or is there any method which i can use as analyse method for the checks of the sapconnect?
PS: the same error appears also if as test i send one fax to a false address: this isn´t the error that i expected to receive.
Please on reply.
Thanks as alwalys.
Alberto

Hi Gagan,
thanks for the reply, i had already seen this link in internet but i´d like to know if there´s a way which use only the standard methods in the CCMS, without changes in any programs.
Not implemented Steps: B, E (autoreaction method not needed for this alert at the moment), F.
I have also created a analyse method with name SOST and assigned to the node.
But after starting the Data collection method for SAPconnect i see in CCMS the alert error:
RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
I didn´t send any fax or email yet, i´m still by the the configuration...
Where does this error come from?
Thanks.
Alberto

Unable to configure CCMS alerts

Hi All,
I'm trying to configure alerts in RZ20.
e.g. whenever there is an error in Mapping (EXCEPTION_DURING_EXECUTE), I can see the alerts in rz20, but I cannot trigger an alert to Alert Inbox.
I tried to follow the following weblog:
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
But it's not working.
Any help?
Regards,
Puloma.

Hi Puloma,
Please check these..
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/dirk.jenrich/blog/2006/06/28/event-log-monitoring-using-ccms-agents
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/04983c6e577546e10000000a11405a/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers

How to configure CCMS alert to monitor Authorization failures?

Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
Ashok

Hello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM

How to Configure CCMS Alert???

Hi All,
I would appreciate if any one can help me in configuring CCMS alert for satellite systems in Solution Manager. I want to configure alerts for:
1. Update Error
2. Locks (More that 10 hours)
Any help to start off this would be highly appreciated!
Waiting for your kind responses.
Regards,
Faisal

Hello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM

Configure CCMS alert to Analyze Application log

Hi ,
Please provide the prodecure to configure CCMS alert for Applications logs from SLG1 tcode.
If any error log(prefarably Important logs ) is created then a alert should be triggered .
Background : We are using Solution Manager 7.0 as Central monitor system for Satellite systems of verions ECC6.0.
Thanks & Regards
ganesh

this answer is no longer needed

Configuring CCMS alerts to send mail

I need to configure CCMS alerts where the alerts will be send to my mail id.
I have configured the seting in RZ21 and activated the alerts
Please tell me the steps to be followed, for sending mails Email in case of any alerts

You basically need to make sure that
1. You can receive emails send from SAP Business Workplace to your SAP/Outlook inbox . This can be done by the Tcodes SCOT, SOST.
2. Configure CCMS_ONALERT_EMAIL_V2 according to your needs (RZ21)
3. Assign this method to the required MTE via RZ20.
This is the broader view. Refer this link and the previous posts for more info
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
There have been many posts on the same topic previously.
Edited by: Kunal Belnekar on Mar 18, 2008 2:00 PM
Edited by: Kunal Belnekar on Mar 18, 2008 2:01 PM

Raise Alerts for BPM errors

Hi Experts,
I have a BPM, from which need to raise Alerts for Mapping error.
is it possible to raise alerts using Alert rule and with out throwing alerts from BPM.
Thank you,
<b>MK</b>

Hi MK
The SAP Computing Center Management System (CCMS) provides a special alert monitor for SAP Exchange Infrastructure.
You use this alert monitor to monitor the ABAP and Java components (including the Business Process Engine) of your Exchange Infrastructure centrally, and to identify different categories of system errors and application errors in the various interfaces and interface namespaces of the components involved.
You use the alert configuration to have the system inform you of errors during message processing. You can receive the alert by e-mail, fax, or SMS. In each case you will also find the alert in your alert inbox.
To configure your alerts, proceed as follows:
●     Create the alert categories that you want to use in your alert rules.
●     Create the alert rules in which you want to use your alert categories.
●     You can configure a connection to CCMS and schedule the periodic transfer of alerts to CCMS.
Once you have configured the connection to CCMS, choose Show CCMS Connection, select a period, and start the periodic transfer.
A background job is scheduled that collects all unprocessed alerts and forwards the data to CCMS. You can also stop this job.
As soon as a particular threshold value is reached, or is exceeded alerts are triggered and The transferred data is displayed in a special CCMS monitor.
You can raise alerts through BPM also .you can design your BPM in such a way that if an exception occurs, the exception handler for it has a control step in which youu can throw alert specifying the alert category and the text.
For more information on alert configuration and CCMS you can refer to http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
hope it may help you
Thanks
Sandeep
PS: if helpful reward points

Global Conditions - Powershell Script - Script is not signed (Error: 87D00327; Source: CCM)

I failed to use any Powershell script in Global Conditions with error 87D00327. The script is signed and tested without problem. Setting execution policy doesn't change the result at all.
Error message as below:
In-line script returned error output: File C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c45de.ps1 cannot
be loaded. The file C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c4
5de.ps1 is not digitally signed. The script will not execute on the system. Ple
ase see "get-help about_signing" for more details..
At line:1 char:2
+ & <<<< 'C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c45de.ps1'
+ CategoryInfo : NotSpecified: (:) [], PSSecurityException
+ FullyQualifiedErrorId : RuntimeException
ScriptProvider 6/23/2014 1:45:06 PM 2516 (0x09D4)
ScriptProvider::CreateInstanceEnumAsync - Script Execution Returned :1, Error Message:File C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c45de.ps1 cannot
be loaded. The file C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c4
5de.ps1 is not digitally signed. The script will not execute on the system. Ple
ase see "get-help about_signing" for more details..
At line:1 char:2
+ & <<<< 'C:\Windows\CCM\SystemTemp\e7001c04-3966-46a7-9622-26c36d9c45de.ps1'
+ CategoryInfo : NotSpecified: (:) [], PSSecurityException
+ FullyQualifiedErrorId : RuntimeException
ScriptProvider 6/23/2014 1:45:06 PM 2516 (0x09D4)
Failed in discovering instance.
Script is not signed (Error: 87D00327; Source: CCM) ScriptProvider 6/23/2014 1:45:06 PM 2516 (0x09D4)
Failed to do HandleExecQueryAsync().
Script is not signed (Error: 87D00327; Source: CCM) ScriptProvider 6/23/2014 1:45:06 PM 2516 (0x09D4)
Failed to process CScriptProvider::GExecQueryAsync.
Script is not signed (Error: 87D00327; Source: CCM) ScriptProvider 6/23/2014 1:45:06 PM 2516 (0x09D4)
I can't figure out a way to capture the temp script file mentioned in the error message so I can't verify the script locally.
Any help will be appreciated.
Sean
Regards, Sean

Hi, Sean.
There was a product issue with signed PowerShell detection method scripts that has been fixed in R2 CU2. I just noticed it's not mentioned in the KB article for CU2. I'm not sure what happened here but I'll have somebody look into this.
Anyway, there's a couple of caveats to consider regarding this fix in your scenario. Firstly if you're creating a PowerShell script detection method you must not copy/paste the script text -- you need to "Open" it. Secondly, if you have any previously created
PowerShell script detection methods with signed scripts, you will need to re-add the detection script (again using "Open"). Finally, you must use an administrator console that's been updated to CU2 and a client that's been updated to CU2 for this fix to be
effective.
I hope this helps resolve the issue for you.
Check out my Configuration Manager blog at http://aka.ms/ameltzer

Systems errors node in CCMS monitoring

Hello,
I try to build up CCMS monitoring in our XI system.
At the moment there is no error in the system.
When following the instructions from SAP and SDN everything looks fine except one issue.
E.g. in /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 from Aravindh (great blog series!)
in the first screen shot there is a node "System errors".
Such a node is missing in my configuration!
My question is: How to generate it, e.g. to implement a mail sender for upcoming errors in the category node?
Is this node generated automatically when the first error comes up for one of the different categories?
Best regards
Dirk

Dirk,
Go through the below links:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
With the help of those you can configure and get System Erros node in CCMS.
Regards,
---Mohan

Error while configuring Enterprise manager

Hello,
I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
*"Configuring database with database control requires a listener to be configured in the current oracle home.
You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
My OS is Windows 7
is there any other way to configure Enterprise manager OR do i need to install any specific package
Thank you friends.

Hi, Finally i created a listener "KUMAR"
*Microsoft Windows [Version 6.1.7600]*
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\praveen kumar gogula>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
*:44*
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     KUMAR
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                22-SEP-2011 17:44:58
Uptime                    0 days 0 hr. 5 min. 48 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
ml
Listening Endpoints Summary...
*(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
*(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "praveen" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
Service "praveenXDB" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Users\praveen kumar gogula>
What to do next?

Error in Configuration of Sales CRM BAPI

Hi Experts,
I am using the BAPI BAPI_SLSTRANSACT_CREATEMULTI to create a quotation with configured material. The quotation was created successfully, but with only the header material ( there are no sub-configurations present(the BOM is not exploding) ).
It gives a error as configuration is incomplete.
When the configuration tab of order is clicked in the change mode, then the required sub-configuration (BOM explosion) is created automatically without doing any changes to the order.
Please let me know for any solution for this ASAP.
Thanks in Advance
Regards
Suthagar.

Hi Shuja
I guess the message is just a warning eventhough the order is created. The warning message states that Auto-Delivery can not be created.
Please check below to understand how the customer is blocked:
1. Manual Block -> Transaction XD03
-->Menupath: Extras->Blocking Data
2. Credit Block -> Transaction FD33
--> In the overview screen check the difference of value between Credit Limit & Credit Exposure
I guess in the case whereby Credit Limit value is less than Credit Exposure also this can happen.
Please try using a different Customer. Also simulate via transaction VA01.
Hope this helps.
Kind Regards
Eswar

Error in configuration of Sales BAPI

Hi Experts,
I am using the BAPI BAPI_SLSTRANSACT_CREATEMULTI to create a quotation with configured material. The quotation was created successfully, but with only the header material ( there are no sub-configurations present(the BOM is not exploding) ).
It gives a error as configuration is incomplete.
When the configuration tab of order is clicked in the change mode, then the required sub-configuration (BOM explosion) is created automatically without doing any changes to the order.
Please let me know for any solution for this ASAP.
Thanks in Advance
Regards
Suthagar.

Hi Shuja
I guess the message is just a warning eventhough the order is created. The warning message states that Auto-Delivery can not be created.
Please check below to understand how the customer is blocked:
1. Manual Block -> Transaction XD03
-->Menupath: Extras->Blocking Data
2. Credit Block -> Transaction FD33
--> In the overview screen check the difference of value between Credit Limit & Credit Exposure
I guess in the case whereby Credit Limit value is less than Credit Exposure also this can happen.
Please try using a different Customer. Also simulate via transaction VA01.
Hope this helps.
Kind Regards
Eswar

Alerting on AE errors without configuring CCMS

Similar Messages

Maybe you are looking for