Alerts Question

Hi
Generally by default alert is triggered AFTER the max number of retry (say 3 times) as configured in J2EE visual admin.
However, is it possible if I would like the alert trigers immediately the 1ST attempt failed while runtime still will continue to attempt the remain 2 times(So, total still 3 times, note that I don't want to set max retry to only1)?
Thanks in advance...
//jack

Hi
Is there anybody can provide any hint to the question???
//jack

Similar Messages

CCMS ALERT QUESTION

Hi,
I am using XI 3.0, and trying to setup CCMS alert setup...
I have 2 quesitnos: first
I done XML alerts using ALRTCATDEF and create alert XDV_XML category, then RWB define add roles in there, all XML messages comes in mail which is good!!!
but when I goto RZ20 and find SAP CCMS Monitor Template and double click under "Exchange Infrastructure" its shows there but empty or disable or white color can't see anyting under that .... WHY?
2nd question; I am tyring to create CCMS alert goto RZ21 click mothod -> display overview -> select mothod CCMS_Online_Email -> copy this mothod to my name like CCMS_TRAVIS
In Execution tab -> type of call alerady select funcation module and call selected: SALO_EMAIL_IN_CASE_OF_ALERT
In Control Tab -> Periodically in dialog process (shot running program) selected
In Parameter Tab -> SENDER: my user name, RECIPIENT: my eamil address, RECIPIENT TYPE: U
In Release Tab -> selected 'auto reaction mothod'
what i do next, what kind of alerts will show there? and how? and when? and if i want show thease alert for more user how do i setup?, and why only CCMS_OnAlert_Eamil only ?,
Please can you give me answer in your words, I have lot of URL but not help full
Thanks a lot

Hi, there
I already have that doc. thanks a lot anyway!!! ok if I am following this doc.
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Step 3 : Creating a System Group for SAP Exchange Infrastructure
When I goto Rz21 and click "Technical infrastructure" then "configure central system" then "maintain system group" and click "Maintain gropus" then create Groups" its asking me new entry put "ExchangeInfrastructure_Systems" now how its look like :-
System Groups for Alert Monitor
46C_Systems
620_Systems
640_Systems
700_Systems
<SYSTEMS_WATCHED_BY_4XAGENTS>
ADABAS D_Systems
CSM_Known_Systems
INFORMIX_Systems
J2EE_Systems
ORACLE_Systems
ExchangeInfrastructure_Systems (This entry has been created but under oracle_system and with not yellow folder)
Note: when I goto rz20 and click CCMS_Monitor_template it does show Exchange Infrastructure but grayedout nothing display under exchange infrastructure.... WHY?
please some advised
Thanks

XI - Alerts question

Hi guys!
I went through <a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step target="d">this</a> weblog and configured it correctly. It is working.
My question is: how does XI know, that the mapping error should be sent to michal? I can see no relationship between settings.. Error category is MAPPING (failed message) and Michal created category CUST_XI_CAT_01.
If I create a new category with number 02 and assign it other recipients, which recipients will get the e-mail?
Thanx Olian!

> So what happens, If I create 3 categories of name
> CAT_01, CAT_02, CAT_03 and I assign to each different
> user USR_01, 02 and 03...
<i>YOu can create N numbers of Alert Category...and for each category u can assing n no. of recepients.</i>
> Now the mapping error appears in my message
> processing...
>
> Which recipients receives the message?
Based on which
> rule? It can't be based on category, because if
> there's mapping error it is MAPPING category. But
> Michal has created CUST_XI_CAT_01 and recieves the
> error message.
> Or will all 3 users receive the error message?
<i>The Error message goes to all user that are in the AlertCategory that u created in ALRTCATDEF and the same use used in the RWB->ALertConfiguration.
Example I create 3 AlertCatergores and added 4 recepients in each.
AC1 (Recepient = r1,r2,r3,r4)
AC2 (Recepient = r11,r22,r33,r44)
AC3 (Recepient = r111,r222,r333,r444)</i>
<i>Now I have created File to File Scenario..in which my Message Mapping is failing.
So if in AlertConfiguration (RWB) i am using the AlertCategory AC1 then Alert will goes to r1,r2,r3,r4. <b>not to</b> r11,r22,r33,r44 or r111,r222,r333,r444 because they are in different AlertCategory.</i>
>Why
> then to create more categories than just 1 called -
> GENERAL?
<i>So it cannot be Interface Dependent:-)
What if my customer want different Alert message format for each interfaece;-)</i>
Thanks
Farooq.
<b>*Rewards Points if you find it useful*</b>

WPA MIC alert questions

I have a few questions regarding WPA MIC errors which I seem to encounter quite frequently on the wireless network that I operate.
I'm running on WCS version 4.2.97.0.
On my WLANs, most of them are configured with WPA and WPA2, with both encryption types (TKIP and AES) checked. My auth key mgmt is PSK.
I'm in a university environment so unfortunately most of the laptops connecting to the wireless are personal machines.
My questions are as follows:
1. Does the above configuration sound ideal? I am unsure if it is wise to have both WPA and WPA2 with both encryptions enabled or not. Could this be a cause of the WPA MIC alerts?
2. Also, I seem to recall mention about being able to configure the hold-time when a client triggers the WPA MIC alert. Would it be a good idea to lower the number from a default of 60?

1)Message Integrity Check (MIC) incorporated in Wi-Fi Protected Access (WPA) includes a frame counter which prevents a man-in-the-middle attack. This error means someone in the network is trying to replay the message that was sent by the original client, or it might mean that the client is faulty. If a client repeatedly fails the MIC check, the controller disables that WLAN for 60 seconds as per the WPA protocol requirements. This prevents a possible attack on the encryption scheme. These MIC errors cannot be turned off on the controllers.
2)Use the "countermeasure tkip hold-time" configuration interface command to configure a TKIP MIC failure holdtime. If the access point detects two MIC failures within 60 seconds, it blocks all the TKIP clients on that interface for the holdtime period.Default is 60 seconds which is a good value to be configured.If needed the time can be reduced.

Newbie Alert Question

HI,
I am trying to display an Alert before a midlet exits and I have bound it to the Exit Command, i.e. in the commandAction I create an Alert alert and call display.setCurrent(alert) (Alert.FOREVER, AlertType.CONFIRMATION) before calling destroyApp(false) and notifyDestroyed(). Problem is, the Alert does not work as expected. Help.
Thanks.

Same problem as me. I can't get it.
Actually, I'm still trying to get past the piss-poor tools Sun provides... Forte won't run for more than 1/2 hour before dying, and the KToolbar isn't much better. I create a new project following the documentation, put the source code where it is, but it can't execute the midlet. Checking the files, I see it doesn't create a .JAR.
Sorry to have deviated from your question, just needed to vent.
Are you having problems with the tools? If I could only get them to run reliably, I could focus on learning the J2ME coding!

Email alerts question

when i get an email i only get a star on the envelope icon and not the yahoo mail icon. this is a warranty replacement phone, on my previous phone(same model) showed a star on both the envelope and the yahoo mail icons. i have the blackberry 8530 v5.0.037 (platform 4.2.0.136)

I just posted this question again because I'm having the same issues only mine is a new phone. Any luck with figuring it out though?

OpsMgr 2012 - Alerting question/discussion

Good day all.
I am trying to get community feedback regarding this issue.
I will state right off the bat that I WISH I COULD DO DYNAMIC EXCLUSIONS INSIDE GROUPS!!!! There, I said it :) I can exclude individual servers, but I cannot exclude dynamically the same way I can include
dynamically.
(my network is much much larger than this but it works for the description)
Here is a scenario. I have a Production Network with 10 servers on it. They are all windows based machines. 5 of them are QA servers which access the live data but are used for other things. I want to email alert for the Windows servers
but NOT for the QA servers.
Ideally I would like to create 2 groups. One group would be dynamically populated and contain "Windows Servers" (which would include all 10 systems).
The second group would be dynamically populated and contain only the 5 QA systems.
Then I would take that second group, and place it in the Excluded Members list of the Windows Servers group. Upon which time I would setup an e-mail alert for Windows Computers and never again worry about another issue being emailed out which is related
to the QA servers.
Unfortunately that's not the case (although, if you have a way I can do this, I'd be grateful).
Thanks for any suggestions you have in advance.
Zach

Hi,
try this:
<Expression>
      <Or>
         <Expression>
             <NotContained>
                <MonitoringClass>$MPElement[Name="UIName.A.Group"]$</MonitoringClass>
             </NotContained>
         </Expression>
         <Expression>
             <NotContained>
                <MonitoringClass>$MPElement[Name="UIName.B.Group"]$</MonitoringClass>
           </NotContained>
         </Expression>
      </Or>
</Expression>
Regards,
Ivan

Agent resident memory utilization ALERT question

Hi all,
Every night during the incremental db backups (and during the weekly full db backup) i get an alert for the "Agent resident memory utilization" level. I did find this similiar post but it didnt' help me out much (Agent memory utilization under Linux
I want to know if i should be concerned with this alert and how i can tune to get rid of it. Does anyone know how to handle this?? I found the following in the oracle documentation about this alert:
1 Agent
The oracle_emd target is a representation of the Oracle Management Agent. The Oracle Management Agent is the Management Agent used by Oracle Enterprise Manager. This target type exposes useful information required to monitor the performance of the Management Agent.
Most of the help topics in this helpset use the term Management Agent to refer to the Oracle Management Agent.
1.1 Agent Process Statistics
The EMD Process Statistics provides information about the performance and resource consumption of the Management Agent process. This metric is collected by default on an interval of 1038 seconds. A value that can be changed in the default collection for the oracle_emd target.
1.1.1 Agent Resident Memory Utilization (KB)
The amount of resident memory used by the agent and all of its child processes in KB.
I also get nightly alert for Commit waits but i don't think they are related. Can someone please shed some light on this alert for me? Here is the full alert that i'm getting:
Name=localhost.localdomain:3938
Type=Agent
Host=localhost.localdomain
Metric=Resident Memory Utilization (KB)
Timestamp=Sep 13, 2006 2:08:14 AM EDT
Severity=Warning
Message=Agent resident memory utilization in KB is 223304
Rule Name=Agents Unreachable
Rule Owner=SYSMAN

If your Agent is really getting up to the Warning or Critical Threshold set for the agent resident memory utilization" metric, you can increase the numbers. by default, the Agent "Resident Memory Utilization (%) is set to 20% (Warning) and 30%(Critical) while "Resident Memory Utilization (KB) is 128000 (Warning) and 256000 (Critical)
From Targets > All Targets > Select the Agent > Click Metric and Policy Settings at the bottom of the screen > Edit the Resident Memory Utilization as required.
Or Instead changing the Threshold, on the same Edit screen, you can simply change the "Number of Occurrences" before an alert is triggered.
Meanwhile it is important to check whether the use of such amount is normal.

Prime alarm email alert question

Does anyone know how to change the email suppression duration after an alarm is tripped from 30 minutes to something longer? If an alarm is tripped
in the middle of the night no one is available to respond and acknowledge the alarm until the morning, so it is possible to have a flood of emails
overnight. I would like to change the email suppression duration from 30 minutes to 4 hours, but I do not see where to do this. Either a gui or a cli
setting change would be fine, I just don't know where it is. Cisco support is telling me this is not a user configurable item. That doesn't sound
right to me. Has anyone found where to change this? The version of Prime is 2.0.0.0.294.

Hello juned!
Having difficulty finding your phone's alarm and enabling email notifications? I am glad to help. I use these features daily, as well.
The alarm on your DROID Incredible 2 is a feature within the "Clock" application. I'm including a link to the device manual that lists the instructions for setting an alarm. They are found starting on page 179.
As far as your email notifications, this would depend on how your email accounts are setup. If you are using the Google/Gmail email account you can enable & change the email notifications by going into the Gmail account settings. These instructions are found on page 148 of the device manual. Now if you are using another POP3/IMAP or Exchange email account, the notification settings are within the "Mail" application. The instructions for enabling & changing these notification settings are found on page 160 of the device manual.
I hope I have answered your questions, and have addressed your concerns.

Calendar alert question

Does anyone know how to make the Calendar meeting reminder alarm ‘Beep once’ with ‘Normal’ profile set to ringing? I have a lot of daily meetings on my calendar and I don’t want to bring out my phone and hit ‘Stop’ for each alarm on my calendar

OK, figured out part of the question. The duplicate birthday and aniversary events are hapening because in Outlook I filled in the details section of the contact and in the Outlook calendar I created an event for that same detail since outlook does not link the two tools. Once you import you calendar and contacs to GMail it extracts the information on personal events from your contacts and creates a second calendar called "Contacts Birthdays & Events" that is then linked to your main GMail calendar creating a second event.

Alert Config

Hi All,
I was just configuring the Alerts for my scenarios.We are on XI 3.0 SP10.
These are the steps which I followed:
1. Created Alert Category. Included my user as the fixed recipient. And added role BC_XI_MONITOR in the roles just in case....
2.Scheduled a Background Job for the ABAP Program SXMSALERT_PROCESS_DATA_GET.
3.Created Alert rules in the RWB . There were no conditions as such . Ever parameter was given *.
When I test an Interface without having Reciever Determination , I dont recieve any alerts in my Alert Inbox.
So I ran the program SXMSALERT_PROCESS_DATA_GET in foreground in DEBUG Mode....I was not able to see any entry in PMI tables.....? So , the Program doesn't trigger any alerts at all.
Is there any configuration that should be done on PMI/CCMS for a basic error in IE like "Receiver Not Found ? "?
Thanks,
Karunamurthy.

Are we saying Alerts work only with SSO userids.
I was able to setup Alerts by creating steps in BPM process as per Michal's Blog - works great!
However, I still cannot get Alerts working when I create condition and rules, subscribing and all that. Nothing seems to work with Alert configuration, Run-to-Run monitoring, etc. After much attempt and exhaustion, I abandoned this direction and hooked up XI monitoring via CCMS.
Now in CCMS monitor I can see all alerts (the rules I created have no bearing). I've copied SAP delivered Method - CCMS_Send_Alert_to_ALM to Z Method....and I'm customizing the FM - SALO_SEND_ALERT_TO_ALM to display user friendly alerts. The problem still is I do not have access to payload. But I hope to get there soon.
By using CCMS alerts, BPM alerts, I see messages in Alert inbox and on my Notes server.
I applied all possible notes, activated all sorts of services, included needed parameters, you name it! I still do not see Alerts via conditions and rules and any meaniful messages in Run-to-Run monitoring. Run-to-Run monitoring shows no errors when there are errors in XML monitor.
By the way, I have the background job scheduled and frequency set and has no impact. The background job runs happily with no Alerts.
However, CCMS background job runs successfully - ZGY_SAP_CCMS_MONI_BATCH_DP and sends Alerts.
I continue stay Alert on any Alert questions and answers!
BTW, we are on SP12
thanks,
Parimala

Using Javascript form validation in WordPress - Firefox issues

I have been struggling for a while to get javascript to validate a WordPress based HTML form which uses radio buttons. I finally came up with a solution with was a bit long-winded but worked - at least in IE and Chrome - however, it doesn't work in Firefox (which suggests my code is a bit sloppy). I think my radio button reference is the issue. Can anyone help with what I have done wrong - apart from use an inefficient approach for validation :-)?
A simplified version of my form:
<script>
function validateForm()
var aa=document.forms["personalise"]["motivation"]["1a"];
var ab=document.forms["personalise"]["motivation"]["1b"];
var ac=document.forms["personalise"]["motivation"]["1c"];
var ad=document.forms["personalise"]["motivation"]["1d"];
var ae=document.forms["personalise"]["motivation"]["1e"];
if (!(aa.checked == true || ab.checked == true || ac.checked == true || ad.checked == true || ae.checked == true))
alert("Question 1 must be completed");
return false;
</script>
<form name="personalise" action="insertdatatest.php" onsubmit="return validateForm()" method="post">
1. Are you seriously planning to quit </b>:  
<input id="1a" type="Radio" title="" name="motivation" value="1" /> Within the next 2 weeks
<input id="1b" type="Radio" title="" name="motivation" value="2" /> Within the next 30 days
<input id="1c" type="Radio" title="" name="motivation" value="3" /> Within the next 3 months
<input id="1d" type="Radio" title="" name="motivation" value="4" /> No, I am not currently planning to quit
<input id="1e" type="Radio" title="" name="motivation" value="5" /> I have already quit
<input type="submit" value = "Submit">
</form>
For My Website : http://www.schoolanduniversity.com

Thanks for your support,
This will partly solve the issue I think. Now, the validation is indeed only done for the first form. But I need to save data twice when entering data in the second grid. When checking the error console in mozilla I see following error:
Error: grid[r] is undefined
Which is reffering to:
if ((grid[r] [1] != missing) ||(grid[r][2] != missing) || (grid[r][3] != missing))
When I save again, the data will be saved without this error.
Is there a way to exclude the second grid in the if Statement?
Regards,
Erik

Every few days, my iPad stops working properly with Messages and Safari.

I am using a 32 GB iPad mini 2 on iOS 8.1.2. Several times recently, without any warning, I have lost the use of Messages and Safari has been having troubles with certificates. I try to send an iMessage and I get the "Message Send Failure" error after a few seconds. I have tried, in the past, doing things like signing out of iMessage and iCloud. When trying to relogin, all I get is a "An error occurred during activation" or "Could not sign in" message. Here is a screenshot of the error message:
In Safari, the problem seems to lie with Trusted Websites. On many occasions after the problem (as a whole) occurs, I get an alert questioning the authenticity of a page I am visiting. This tends to happens with major websites that Safari has never had problems with before.
I have tried many solutions to fix this problem. So far, it has happened three times (the most recent going on while I'm typing this), and the two times where it seemed to be resolved, the resolutions were completely different. The first time it happened, I signed out of iCloud, did a hard reset, and finally (and this is what temporarily fixed the issue), I chose "Forget This Network" for the Wi-Fi network I was using in network settings. after signing back in, everything worked how it should.
The problem showed up again a week or so later and, after all of the things listed above failing, I restored from my iCloud backup. I had experienced no more problems since until now. I have again lost the ability to use iMessage and Safari has strange problems regarding web certificates.
Thanks!

This morning, I experienced yet another temporary fix. It was just working. Even though I was signed out of iMessages I started receiving them again. I wonder when it'll happen again...

How to remove oneself from discussion thread

how do you remove yourself from a discussion thread? i asked a question 6 months ago and i still get updates, i have checked my profile and every alert question i have selected no. ***?

Read here:
https://discussions.apple.com/static/apple/tutorial/email.html

Is Set Tab Order Broken in Acrobat 8.x Pro?

I can't seem to get it to work. Even when the automatic tab order setting is done and it is numbered correctly, when I switch to Preview and also save/close/re-open in Preview, the tab order is what it was before. When I go to Edit Layout, the tab ordering numbering shows correctly for all fields, but back in Preview, it goes out of whack in the same way.

Yes, I had already tried saving and even closing and re-opening. The Set Tab Order interface does not even operate in a fashion the user would expect. When replying to the alert question about automatic vs. manual setting of the interface, then randomly clicking fields, at one point the order stops changing once a field is selected. A text field becomes the LAST numerical field when it is selected, rather than starting at one and proceeding in ordinal fashion.
I am convinced that this feature is bug-ridden based on my attempts to work with it and given the numerous posts "commenting" on this very feature.

Alerts Question

Similar Messages

Maybe you are looking for