Align Columns? using Acrobat Pro 9 to create pdf from text file(s)

Hello,
Every time that I have tried to create a PDF from a text file, the columns dont align. The default Notepad setting I use to view a text file is Courier New which shows the columns aligned. How can I set defaults in Acrobat Pro 9 to have columns align?
Thanks

By definition a plain text file has no font, so it cannot be monospaced. Acrobat converts plain text using Times, this cannot be changed.
As TSN suggests to create a PDF from a text file with a specific choice of font and formatting you must print from another application.

Similar Messages

How to create PDF from text file with specific layout?

I wanted to create the pdf from text file in specific layout - Landscape orientation and JIS B3 Page size while at Adobe Acrobat Pro.
In past, I could do a right click on a text file (desktop area) and select print to print out the document into .pdf BUT only if I set the Adobe PDF to Landscape and JIS B3 Page size BEFORE. And I could only do 15 text documents at once.
I wanted to see if I could do the create the pdf from text file with specific layout in Adobe Acrobat without having to go to Control Panel to preset the Adobe PDF to specific layout at every time. I would have to set Adobe PDF back to normal layout after I'm done with these pdf print outs. I do lots of pdfs in normal layout. Sometimes I would forget to do that.
So, How do I do that?

No such luck. It would output the contents in letter size even in JIS B3 Page layout at MS word.
Is there a script or action where I could set the orientation and page size before creating PDF on these text files?

Acrobat Pro XI Create PDF from web page will only create first page.

Whether I try from within Acrobat or using the convert button on the Adobe toolbar my PDF cuts off at the bottom of page one and will not create subsequent pages including the rest of the webpage content. I've played with several settings. Any idea why?

I think I might have this problem too. Only difference is I am using Acrobat Standard. I have Acrobat Standard X on another pc and it works fine. An example of a web site page is https://connectonline.asic.gov.au/RegistrySearch/faces/landing/SearchRegisters.jspx?_adf.c trl-state=1766qhwwjv_4 I am in Australia. I hope you have access to this page where ever you are. Towards the bottom of the web page, there is a list of 3 documents. On my other pc, I can convert to pdf the whole page but on this pc, I only get one page.

Create PDF from text file.

The CreatePDF app description states "Convert all your Office, Photoshop, ..., Text, and RTF files to PDF using 'Open In' to send the files to the CreatePDF application" (bolding mine). But I see no way in the iPhone Notes app to do an 'Open In'. Really?!? I can't even create a PDF from the standard Notes app?!?

Hello tomscheifler,
notes in the notes-app are NOTES not FILES.
Conclusion: You cannot convert them.
You have take a detour via e.g. "docs to go" and save the note as word doc.
Then adobe does the job you expect....
Regards

Acrobat 8 Pro and Create PDF from a Website

Hi,
I'm out of sorts. I can't seem to be able to turn a website thread into PDF file using my Acrobat 8 Pro (Mac user)....
The thread I'm trying to save has multiple pages and all Acrobat 8 does is save only the first page and not any of the subsequent pages.... unless I manually go page by page but then I end up with multiple PDF files that I would have to combine and that is just too time consuming --and would have to learn to do that as well.
Here's the link to the website thread I'm trying to convert into PDF:http://tinyurl.com/6guqpf
Could someone please advice what I may be doing wrong?
Thanks,
R

Thanks Paul, I've tried to Save as PDF in the OSX print dialogue box- but it only saves the first page of the thread I'm trying to save (when most threads have more than 1 page, sometimes up to 30 pages each)
This is what my friend wrote and how she found a way to solve her problem.... however I don't have Adobe 5 as she does and I would like to not have to get Adobe 5 but use only Adobe 8....
<<I start Adobe 8.
Select Create PDF from Web Page and paste in:
http://learningcenter.atkins.com/sessions/discussions/index.jsp?courseSessionId=7233&webPa geId=1000007&courseId=3856
When it's made the first page (see attached) [<<=== can't attach here since you need a password to view it.]
I save it and exit.
Then I open Adobe 5 and then I can click on each topic to start capturing the information (meaning all pages to each thread without a problem).
If I click on a topic in Adobe 8 ... it makes a page in a new browser window ... and I'm lost.>>
Do you or anyone else know why this is so? Why Adobe 8 would open a page in a new browser window and Adobe 5 doesn't?
Thanks again,
R

Creating PDF from Office files in Acrobat X for Mac

Dear All - I just installed the Mac version of Acrobat X (with the newest dot release upgrade). I was surprised to find (on my installation anyway) that the only way to create a PDF from an Office document is from within Mac Office, using the print command to create an Adobe PDF.
There is no way to use Create PDF from the initial screen or the menu bar of Mac Acrobat X to convert an existing .doc, .docx, .xls, .ppt, etc. file - the dropdown list of supported formats doesn't include any of the Office formats. Nor does dragging an Office file's icon onto Acrobat's icon work.
I know from the video tutorials on adobe.com that the Windows version of the Acrobat X product does support direct conversion of Office files without having to open them first in Office. Is there something screwy with my particular installation, or is the exclusion of Office conversion in the Acrobat application (as opposed to through Office) a "feature" of the Mac version for some reason?
Many thanks.
Bob

That's a good question, but I don't have a definitive answer. I know that Adobe has claimed to be working on providing PDFMaker capabilities (at least partially) for the Mac, but we haven't seen anything yet. PDFMaker was dropped as of version 9, but even before then, it was considerably less capable than the Windows version.
I believe there are techincal limitations on the Mac that prevent them from integrating it with Microsoft Office products. I know that on WIndows, Office needs to be installed for PDFMaker to work, so Acrobat (PDFMaker) relies in part on MS Office functionality. If the same APIs aren't available on the Mac, there's not a lot they can do apart from implementing a conversion process that does not rely on MS Office, which sounds to me like a considerable undertaking.

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Unable to create PDF from Publisher file

I am able to create .pdf from a .jpg, also from an .xls ... but not from a Publisher document (2007).
I get a prompt to run in repair mode and I tried that (twice) but the problem is not being corrected. At one point I had a message about PDFMOUTLOOK and thought I disabled it. I tried both ways, from inside Publisher, and dire Any help will be greatly appreciated.ctly from Adobe Acrobat 9 Pro ... neither works.
Below is the log:
%%[ ProductName: Distiller ]%%
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
-169
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
LinK

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Create PDF from Multiple Files Error

Running Acrobat 8.1.2 and InDesign CS3 8.0.2
When trying to create a PDF from multiple files, I am getting an error with each file as it is opened by Acrobat to create the PDF file. The error reads:
Invalid value for parameter 'using' of event 'exportFile'. Expected PDFExportPreset, but received "Standard".
The files are also left open in InDesign afterward instead of being closed. Does anyone have any idea what might be causing this?
Thanks.

Did you upgrade your Office / Word installation?
PDFMaker-compatible applications for Acrobat 7 with regards to MS Office:
--| Office 2000
--| Office XP
--| Office 2003
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Problem creating pdf from multiple files

Hello,
I'm running Windows XP SP3 with Adobe Acrobat Standard 8.2.1. When I try to create a one pdf from multiple files in Adobe Standard 8.2.1 the application just closes. The two files I'm trying to combine into 1 pdf file are word files. I'm able to create a single pdf of each word file by opening them separately in word and sending them to the acrobat printer. I've tried combining other files also, but had no luck. Windows events doesn't log anything under applications and no error message pops up when the application closes.
Anybody have any ideas how to troubleshoot this issue or what could be causing the applicaton to just close?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

Creating PDF from multiple files results in file name AND chapter name both appearing in TOC.

And all the bookmarks in that chapter nest directly under the file name. I would rather have just the chapter title appear with no file name in the TOC and the chapter bookmarks nested under that.

Hi tekwrite1955,
This is an expected behavior. When you create a pdf from any file it will list the filename in the TOC.
You have to manually edit the bookmarks.
Regards,
Rave

Can Acrobat Pro 9 create pdf forms that are readable by older versions of Reader?

I have just downloaded the Trial of Acrobat Pro 9, and my client now tells me they only have Acrobat 5, and can't open the pdf form I've made in 9. My form uses text fields and checkboxes, tooltips but no validation or calculation. Does anyone know if it is possible to save this form in a way that is backwards compatible with Acrobat 5?
Failing this, does anyone know what version of Pro I need in order to add fields and still allow v5 to open the files?
thanks!
- Thea

I did not read your original post carefully. As far as saving a form that is readable in AA5, AA5 should be able to read an AA9 form as long as you did not use any of the new fancy things in it. In the meantime, simply save the form using either Reduce File Size or PDF Optimize with the compatibility set to AA5 or AR5. That process will strip any special issues from the PDF I think. At least that is my assumption. I create PDFs that are AA5 compatible all the time by simply having the properties of the Adobe PDF printer set to AR5 compatibility. As far as the form feature, that is really just a matter of being sure you use features that are AA5 compatible as I have suggested and saving, possibly using one of the two options I have mentioned. In most cases, AR5 will be able to read it even if you do not save in that process, but do not get fancy in the structure.

How do I use Acrobat Pro via subscription vs from my harddrive?

I subscribed to Acrobat Pro last year and recently got notice that it will automatically renew. I need to use it now, but instead of launching via my subscription, I'm being asked for a serial number for the CS5.5 Master Collection. How can launch the app from my subscription instead of from my harddrive?

Hi jane metcalfe,
I can see that you purchased Adobe Acrobat XI Pro Subscription. In order to use this, you need to download Adobe Acrobat and then install it on your computer and activate it using your Adobe ID and password.
Please use the link below to download Adobe Acrobat:
Adobe Acrobat XI Software + 5 Additional Acrobat Services | Adobe Acrobat

Creating PDF from JPG files

I scan several pages from a book and wish to compile a PDF file from the scanned JPG files. What I want is the PDF file to be as small as possible, using relatively good JPG files (they are on the order of 300k), so that the fonts don't look too blurry when magnifying the image in Acrobat. My PDF file gets to be very big when creating a file composed of around 100 scanned pages. How can I make the file smaller?
I can't use optical character recognition to convert the text of the page. Much of the text contains mathematical symbols and figures, but is generally just black-and-white.
I feel the large file size of the resultant PDF file is due to all the "white space" of the JPG file. Is there some way to have Acrobat "ignore" the white when creating the PDF file, and then just display the information part of the JPG file on a white background?
Remember, I'm creating a PDF file from scanned textbook pages, not photographs. I would think that there is an optimum way to do this, keeping good resolution of the text (the "black" or non-white information), and minimizing the file size of the resultant PDF file.
Any thoughts?
I have Acrobat 8, Photshop Elements 6, and Windows Vista Ultimate.
Thanks

For starters, you should be sure and scan them as grayscale. Then the "white space" won't be an issue.
Basically the answer is going to be in your initial scan. You need to optimize the files as best you can there first then create the PDF.

Creating pdfs from different file types (.doc,.xls etc) and merging them into a single pdf with book

Hi,
I need to create a pdf from 2 different file formats, for example .doc and .xls file and merge the contents of the two files into a single pdf.Also the final pdf created must contain bookmarks and links. Thanks in advance.
Priyanka

You can do this on the desktop using the Acrobat SDK as a custom plugin.
You can do this on a server with Adobe LiveCycle PDF Generator.

Align Columns? using Acrobat Pro 9 to create pdf from text file(s)

Similar Messages

Maybe you are looking for