Alignment of NUMERIC output in Reports.

Can anyone tell me how to align numeric records.
The output i am getting in my report is this
Collateral
400,000.00
100,000.00
20,000.43
9,245.34I need to align the collateral so that it looks like
Collateral
400,000.00
100,000.00
20,000.43
9,245.34The format mask I am using is for the display is:
FM 999,999,999,999,990.99
The default width for this column in report writer shows as:
0,-127.
Can anybody advise?

PLEASE help and advise
I cannot seem to align the values
Thanks

Similar Messages

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to bring output of report on smartform

Hi experts,
I want to display output of one std report on the smartform. Output of the Z report is using large no. of write statements. I want to create one smartform which displays output same as the output of report.
Is it possible to directly bring output of report on smartform??
Please give me solution
Thanks
Sameer
Edited by: sameer dhuke on Mar 17, 2008 6:53 AM

Hi,
To The best of my knowledge it is not possible directly.
You have to design the smartform with all the fields in the report.
And u have create the driver program for the Smartform or u can use the report as a driver program itself.
Then Call the smartform using FM SSF_FUNCTION_MODULE_NAME to call the smartform.
Regards
Sandipan

Page breaks appear in the spool output of report when run in the background

Hi All,
Report is using fm 'REUSE_ALV_GRID_DISPLAY' to display the report. parameters passed to this fm for display are :it_fieldcat,is_layout,it_events,t_outtab.
Page breaks appear in the spool output when report is run in the background.These page breaks needs to be removed. When executed in the background, the excel extract should be the same as if pulling directly from the report itself.
How to remove the page breaks in background?
Thanks & Regards,
Abhishek Singh

Hi
You can use the below code , which the reprt run in background. If you run the report in background thenyou need to use 'REUSE_ALV_LIST_DISPLAY'
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING e_offline = off.
IF off IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
ENDIF.
Regards

Output of report to control file

Hi all,
I have to show my report output into 2 formats one is csv format and another is ctl file.
For this I am using FND_SUBMIT.SET_REQUEST_SET in after report trigger of my report.
For first output type I am submitting XML program to get csv output.
After this my second progrm output type has to be control file, in this control file I have to show the Total sum of amount which is generated in first program that is csv format. How can I achieve this?
How can I get output of report in control file?
Could you help me in this?
Thanks in advance

You may have an additional layout for the .ctl file. That is a new set of frames and fields that gives you the .ctl file, without querrying again.
As for the after report trigger, it would be best not to use it. It is obsoleted.

Defining a Center Aligned Table in a WebI Report ?

I sure hope I'm missing something, but one of our developers has been struggling with this for days and it seems like such an obvious report building exercise. I looked myself and couldn't see how to do it either... not even using something crafty.
The basic problem is that we have some content that will change every time the report is run, so we put this data in a one row table with the "show when empty" feature disabled for the cells and "auto-fit width" turned on. If we could just center align the resulting table we would be fine, but the only way to center align it is to select another item and then use the center align feature. However, that is a one-time operation that simply calculates the offset given the current data. If the report is run again with different prompts (for example) the table size may be different, but the center offset is not recalculated because there is no way to mark the table for center alignment.
So we need the table to be center aligned (either to the page, report header, or another element would work for us) because it will have multiple (optional cells). Also, FYI, we can't just put it all in one forumla and let the cell content be centered... because we're actually embedding multiple hyperlinks in those other cells... in a borderless table... to get a centered block effect on the results.
Any suggestions? Only thing we've come up with is to insert padding cells that we set to Fixedsys fond and then calculate a space Fill() on based on the other results... but that's really messy and seems like overkill for something that's normally a "bread and butter" report building feature.

Hi Ray,
As I understand you want to Centre align the table , but when you select the table centre align feature is disabled and you can only align the text in the table.
You can use Relative Positioning Feature to align the Table in relation to the Bottom, top, Left and right edge of the report and other block. This feature allows user to fix the position of the table even if data in the table changes and auto-adjust the table position when block data or another block data changes.
You can manually drag the table to the centre of the report; set the alignment of the text to the centre, when your data changes the, WEBI wonu2019t change the position of the table nor it changes the text alignment.
Please paste the report data here so that I can understand how you want to display the table data and your statement u201Cwe put this data in a one row table with the "show when empty" feature disabled for the cells and "auto-fit width" turned on.
Do you have any other blocks of data in your reporting along with the table data that you want to centre align?
I Hope this Helpsu2026
Thanksu2026.
Pratik

How to define the datafile output_Name when output a report as spreatsheet

Hi,
in 10gR2 env. with AS 10 g / Reports work with RWSERVLET
i do output a Report as a SPREADSHEET, that works fine,
but
to save this file there is a file_name like 'getjobid1234.xls'
I tried to work with the report - title with boilerplate B_OR$REPORT_TITLE placed in margin ,
but it doesn't work, no change in output_file_name
and : how to change the B_OR$REPORT_TITLE dynamic while runtime ?
any Help ?
Norbert

i use
Desformat= SPREADSHEET
Destype= CACHE
web.show_document(/reports/rwservlet/getjobid<jobid>?server=ReportServer,_blank);
with a 'name' as getjobid<jobid>
desname doesn't work in CACHE - Mode ?
with
Desformat= SPREADSHEET
Destype= FILE
Desname= my_variable_report_name.xls
there is the file my_variable_report_namet.xls saved on host-file-system
ok, but can I call this with my_variable_report_name from cache without to save it everytime on server before ?

For output display report is final_internal table or structure in wd ABAP?

Hi all,
for output display report is final_internal table or structure in wd ABAP?
in wd java output display report -.> CALLING rfc and that RFC OUTPUT table
finally in internal table is assigned to STRUCTURE .Same procdure?
Thanks,
RAMA

Dear Madhu,
thanks for guidence!
its showing popup tht this BADI ( ME_CHANGE_OUTTAB_CUS ) is only use for "SAP Internal use".
Regards,
Praphull

Pacifictime format PST required in the output of report

I want to display the pacific time format i.e. PST in the output of Report.
Can you please let me know.....if any function module or else....
I am using the followin lines of code but it was not showing correct time...please correct me if I am wrong.
REPORT ZTIMEZONE.
DATA: time_stamp type timestamp,
      dat TYPE d,
      tim TYPE t,
      tz TYPE ttzz-tzone.
Data : text(4) type c,
       text1(4) type c,
       text2(4) type c,
       text3(20) type c.
data : temp(15) type c.
*tz = 'BRAZIL'.
tz = 'PST'.
dat = sy-datum.
tim = sy-UZEIT.
CONVERT DATE dat TIME tim
        INTO TIME STAMP time_stamp TIME ZONE tz.
WRITE: / time_stamp.
temp = time_stamp.
concatenate temp8(2) ':' temp10(2) ':' temp+12(2) into text3.
write : / text3.

It considers your time as the GST and than calculates the time for you as per the PST's rule.
Try like this:
DATA: time_stamp type timestamp,
dat TYPE d,
tim TYPE t,
tz TYPE ttzz-tzone.
tz = 'PST'.
* Get the time in the time stamp
get time stamp field time_Stamp.
CONVERT TIME STAMP time_stamp TIME ZONE tz
        INTO DATE dat TIME tim.
WRITE: /(10) dat, (8) tim.
Regards,
Naimesh Patel

Comma separated output using report builder

Hi Experts,
I am working with EBS 11.5.10, database 9i, and report builder 6i. I have a XML Publisher report, with output type EXCEL, which is working fine. But if i get huge data like 1million, 2million, it's not able accommodate the output in EXCEL. Since it's EXCEL 2003, it can't handle data more than it's capacity(i think 60,000 rows).
So we thought, if we can generate the output in CSV file with comma separte, then we can open the file in EXCEL 2007. Could somebody help me how to generate the CSV output using report builder 6i.
or is there any work around to our problem, kindly help me, it's urgent.

Hi,
Not sure if report builder can be made to generate csv output.
But you can create a PLSQL Report. Just use the query of Report Builder and write a Plsql procedure based on this query
-Idris

Generating delimited output from Reports Runtime R60

When generating a delimited file using Runtime how can you predict or determine how Oracle will form the output rows from the report layout? Does anyone have any documentation on Runtime that explains the generation process as there is nothing in the Runtime Reference manual.

The only documentation (such that it is) that I've found on this is in MetaLink, in Note 68245.1 "Delimited Output in Reports" and a tiny bit more in Note 120072.1 "Suppressing header on delimited output".
- Bill

Need to change font size and style in output of report

hi experts,
im having a requirement of changing the font size in the output of report ( alv grid display).
regards,
andrews.

hi rob,
When i execute the report i want in the output of the report (alv grid display report)
regards,
andrews.

Build Reports from XML output from Reports

Hi,
I was just wondering if it is possible to build reports from output in XML format, originally generated by Oracle Reports.
The XML output produced by Reports is stored in a database for further processing.
TIA
Hien

Hi Hien
If I have understood this right, you need to create report in XML format from an XML Report Definition File. From the Builder, Generate to File from the File menu and choose XML format for the output.
Remember that XML output from Reports is Data driven and faithfully reproduces the Data Model. It is NOT layout driven.
Regards
Sripathy

Controlling the Boolean Controls and generating Numeric Output correspondingly

Hello everyone,
I am working on a project of electrode activation, here I was thinking that how could I control one electrode at a time and generate a numeric output of it correspondingly. I want to substitute each electrode with a an LED on Front Panel and generate numeric value of each LED on Block Diagram.
So it can be divided into two parts
1- Control the Boolean outputs
Here, my target is that if I have 5 leds who are used as Boolean control, should be controlled in such a way that only one of them glows at a time and the remaining turns off.
I mean that for instance if #3 was glowing and the user pressed #2 then #3 should be turned off and only #2 glows.
2- Generating Numeric value correspondingly
Then according to the position of LEDs I want to generate a numeric value correspondingly, like previously output 3 was coming and the output 2 comes when second LED glows.
I request all the participants on this group to help me on it.
Regards
Solved!
Go to Solution.

Thanks very much Dennis, Its really what i need.
But i have a bounding in the radio button to place all option together.
Since i am activating the appropiate electrode on the body, all the options could not come vertically or horizontally.
So can you pls guide me how can i make my 5 electrode behave like a radio control.
Thanks once again.

Output of Reports

We need the output of reports 6i to be converted to EXCEL. Can anyone help us out in this?

Oh.. i thought you will hit here at last. But finding the path of the EXE every time in the client PC is not a suitable solution. So we cant hardcode the EXE path also.
But even here, we can handle in 2 ways.
1) Putting the EXE in the PATH variable of the SYSTEM
2) Finding the EXE path by reading the REGSITRY of the client PC.
But our current standards doesnt allows us to take either of this. Because we arent allowed to use HOST commands from the front end.
Anything else we can do to achieve apart from what i have said before
Many thanks for your participation and prompt replies.
Guru

Alignment of NUMERIC output in Reports.

Similar Messages

Maybe you are looking for