All burned discs are coming up blank.

Hi
So I've burned some DVDs and after it is done it refuses to believe there are any files on it. The reflective side shows that difference in colour in the areas used and it takes its time burning and verifies afterwards so the files are there. I've used Disk Utilty to burn to a DVD and I've tried manually adding files to a DVD both with the same results. No problems burning or verifyng, nothing there.
Thanks
Ben

Hmmm, might try this Ben,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Similar Messages

MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank

Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
It is a relatively new cartridge and genuine HP ink. Stopped suddenly
Pages from print or copy are coming out blank.
Tried to clean print heads and it says
Print System Failure : Oxc19a0003
and tells me to switch printer off and back on which I have now tried but getting the same message!
What does this mean?

Hi @BrendaMC,
Welcome to the HP Forums!
I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
I would suggest to go through the following guides:
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....
Ink Usage in Inkjet Printers.
Hope these guides are helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I just bought a second iPhone for my business... I used my existing apple account and now all my texts are coming to both phones.. How do I get a secondary apple ID and change it on my business phone?

I used my existing apple ID when I purchased a second iPhone for my business.. Now all my texts are coming to both phones.. Is there a way to create a new apple account for my business phone and if so.. How do I delete one and add another?

Yes, you can have two separate Apple IDs, and it's pretty easy to set this up. Go into Settings > iTunes & App Store on your business phone. You should see your current Apple ID. Tap on it, then tap on sign out. You can then create a new Apple ID, using a different email address and password than those associated with the Apple ID on your other phone. Log back in using this new information, and you shouldn't get the texts that come to your other phone.
Hope this helped!

Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and makin

Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.

Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.

Fillable Forms Are Coming Back Blank

We use a fillable PDF application form. A number of the applications that are returned to us are coming back blank. It seems in many cases these have been completed on a MAC.
Any suggestions to assist our candidates or instructions we can provide to ensure this doesn't happen?

Make sure the users do not use Apple Preview, or any other third-party PDF
viewer or plugin. They should stick with Adobe Reader for best results.
On Tue, Sep 23, 2014 at 8:22 PM, eswhitmore <[email protected]>

I bought apps and they are coming up blank instead a picture on the icon

ibought some apps for my i pod and they are coming up blank with no pics on the icons? What can i do?

turn off your ipod then turn it on again and it should be fine!!

Hints why all Update Routines are coming with 0.00. Even the simple ones?

Hi,
any hints why about 5 update routines that I have written are coming with 0.00 or blanks.
Even very simple ones such as the one for MyCclQTY in the cube, which has the only line in the update routine between ODS and Cube:
RESULT = SOURCE_FIELDS-QTY.
shows in the cube output as blanks while QTY has data:
e.g. of Cube Output:
QTY-Field2-MyCclQTY----MyCalField2
300--125--BLANK--
0.00
600--42.9-BLANK--
0.00
Basically all my routines, e.g. MyCclQTY, MyCalField2
are not showing values while the direct mappings show the correct data.
In the above simple case, with the routine shown above, I expected to see 300 and 600 for MyCclQTY but they come out blank.
Any hints as to what may be wrong?
Thanks

<Font Face="Tahoma" Color="Blue">
Dear Friend,
Can you please try
RESULT = COMM_STRUCTURE-Qty.
Also please check that you have assigned correct Unit of Measure in the field "Unit of Routine".
Hope it helps.
Regards,
Abhijit
</Font>
Edited by: Siegfried Szameitat on Nov 3, 2008 12:23 PM
deleted request for points. it is against the rules.

All the menus are coming up as capital A in a box and so are all the icons

All the Menus and icons are coming up as capital A with a square around them.The main tool bar is also this way which includes all the drop down menus.
Need to fix soon. Please help me out on fixing this annoying issue, Thanks, Eric

Hi, and welcome to Apple Support Communities.
Which version of Mac OS is installed?
How big is the hard drive and how much space remains available on it?
Have you tried repairing permissions?
http://support.apple.com/kb/HT2963?viewlocale=en_US

All warning messages are coming as an error message.

Hi Experts,
I am stuck in a problem where all the warning messages in my program are coming as an error message.
if I define a message :
MESSAGE 'HI' TYPE 'W'. --> it gives an error msg instead of warning.
Any clues......pls
Thanks
Rohit

Hello Rohit,
Where are you giving the warning message ? The behaviour of the message depends on the position where the message is triggered.
You should refer to this post for details: [warning message behave like error message why|warning message behave like error message why]
BR,
Suhas

Adobeform Chinease Translation issue - Translated area coming as blank

Dear Gurus,
I have beed facing an issue while translating adobe form from English to Chinese from SE63 transaction using PDFB.
There are two section one is Source language and another is Target language.
Now in my case the target language is coming as blank , i.e. there is nothing I can translate , for other language its working properly.
So now the question is how to resolve this issue ?
Thanks
Kuntal Biswas

HI Kuntal,
In Adobeform we don`t have to translate variables through SE63 tcode.Inside Adobeform only in html code you have to copy translated values in place of you variables.
Please check I will let you know once I will get exact area inside Adobeform.
Regards,
Ankur

I have been using my .mac email address for many years without a problem. Suddenly over the last few days the emails have been coming in sporadically. I know this becasue all the emails are coming in on my phone and on the laptop, not on iMac.

I have been using my .mac email address for many years without any problem. Suddenly the emails are coming in sporadically or not at all. I know this because they are all coming in on my phone and laptop. My gmail account seems unaffected with emails coming in fine. Any ideas? Thanks
Marian

Back up all data. Rebuild the mailbox.

I have a mx860 printer scanner. All my scans are coming up photos. How do I scan documents

I have a MX 860 printer scanner. All of my scans are coming up as photos. How can I make it scan documents

Hi WSF,
To scan in documents as PDF files, please follow the steps below:
1. Start MP Navigator EX.
     1-1. If on a Windows computer: Go to your START MENU, then ALL PROGRAMS, then CANON UTILITIES, then CANON MP NAVIGATOR EX (folder), then CANON MP NAVIGATOR EX (application). There may also be an MP Navigator icon on your computer desktop; if so, you can just double-click on that to open the application.
     1-2. If on a Mac: From your GO menu, select APPLICATIONS and then CANON UTILITIES. In the CANON UTILITIES folder, locate the MP NAVIGATOR EX program and open it.
2. When MP Navigator opens, click on the SCAN/IMPORT option at the top left of the window, then click the STACK OF DOCUMENTS (ADF) option.
3. Place the documents you want to scan in the automatic document feeder on the top of the printer, then select your Document Type (either Color or Black and White Photo or Document).
     3-1. Please note: When you select Magazine(Color), the Descreen function will be enabled and scanning takes longer than usual. To disable the Descreen function, deselect the Descreen checkbox in the Scan Settings dialog box.
     3-2. Select Text(OCR) to extract the text in the image and convert to editable text data using MP Navigator EX. This setting is not available when the Compress scanned images when transferring checkbox is selected on the General tab of the Preferences dialog box.
     3-3. Color scanning is not available for Text(OCR). To scan in color, use OCR in One-click and scan with Color Mode set to Color.
4. Click SPECIFY... to modify the document size and resolution as required, then click OK. By default, the document size selected is 'Auto Detect', and the Resolution selected is '300 dpi'. Both of these settings are usually satisfactory if you want to scan a document in as-is. If you need to specify a higher resolution scan or specific document size, please click on the 'SPECIFY' button.
5. Click the green SCAN button on the screen. Scanning starts. When scanning is completed, the Scan Complete dialog box opens.
6. Select SCAN or EXIT. You will select 'Scan' to scan the next document if there is one, or select 'Exit' to end scanning.
7. The scanned images appear in the Thumbnail window. To save a multi-page document, you will want to ensure that you put a checkmark under each of the scanned thumbnail images that you want to save. If only one thumbnail image is selected, it will only be a one page document.
8. Save the scanned images by selecting 'SAVE AS PDF' option on the bottom left-hand corner of the window. Selecting the 'SAVE AS PDF' option will save your file in a PDF format. This is good for saving documents, letters, etc. When you select this option and have multiple thumbnail images selected, the window that will appear will be a multi-page PDF save window.
9. Once you make a selection in Step 8 above, a window will appear giving you additional options for the file you are trying to save.
     9-1. The 'SAVE IN' section will show you where the document is going to be saved. By default, the files are saved in the Pictures folder in a folder labeled 'MP Navigator EX'. If you would like to specify a different location to save the files to, please click on the 'BROWSE..' button and select the location where you want to save the file, the press the 'OK' button to return to the save window.
     9-2. The 'FILE NAME' section will let you name the file you are saving. By default, the file name will be 'IMG'; you can delete that out and name the file whatever you like.
     9-3. The 'SAVE AS TYPE' section will allow you to choose the file output type. If you selected an image file, you will have the option of JPEG/EXIF, BMP or TIFF; if you selected the 'Save as PDF' option, you will be able to save the file as a single or multi-page PDF file.
     9-4. The 'SAVE TO A SUBFOLDER WITH THE CURRENT DATE' option will let you save the file in a subfolder with the current date inside of the folder location you selected in step 9-1 above. If do not want a subfolder created with the current date inside of the folder you selected in step 9-1 above, please uncheck the 'Save to a Subfolder with Current Date' option.
10. Click the SAVE button. The scanned images will be saved according to the settings you selected above.
11. Once the file is saved, you will be given the option to 'OPEN SAVE LOCATION' or 'CLOSE'. I would suggest selecting 'Close', and then going directly to the location where you specified the file be saved to. From there, you should be able to double-click on the file to open it.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1766 I have videos coming into my messageing and they are coming in blank. It says there is a video however when I try to play the video the screen is black? any suggestions

How do I get videos to paly that arrive in my text message as a MMS. Currently the videos are coming in with just the arrow on top of the video, but when i try to paly them the screen is black only sound.

The video file size is too long (big)

I have just had an iPad mini but all my messages are coming through on my iPad and iPhone how can I stop this happening

I have just had an iPod mini but my messages are coming through on my iPad and my iPhone how can I stop this happening ? Do I need to reset my iPad ?

To prevent messages from reaching both devices you can turn off Messages on the device you do not want to receive messages but keep Messages on on the device you do want to receive Messages.
You might also look at this option for both devices.
Settings > Messages > Send and Receive > review the a riotous choices for how you can e reached and select the ones that are most appropriate for you and the device you are setting.

My drive thinks all my discs are blank!

Whenever I put a CD or DVD into my disc drive, the drive either spits it out, or spins really fast and then tells me i've inserted a blank disc or tells me "the disk you inserted was not readable by this computer". I've reset the nvram, the pram, and the PMU, and repaired permissions. If anyone can give me any help, please do. I'm not sure when this started or why, but i really want to fix it.
Thanks! Here's the specs for the drive:
MADSHIDADVD-B EJ-8#5E:
Model: MADSHIDADVD-B EJ-8#5E
Revision: GAND
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
All the firmware is up to date.
PowerBook G4 Mac OS X (10.4.8)

Probably ether your discs or your optical drive lens is dirty.
Use micro fiber cloths to clean the discs and test them with a different machine.
there are plently of cd lens cleaner discs but i don't know of there compatibility with compact slot loading drives so check to make sure.

All burned discs are coming up blank.

Similar Messages

Maybe you are looking for