All layers are linking together when trying to edit just one....

I pulled in 4 pics, each to a different layer to a blank layer and board. When I placed all the images, and then tried to edit each photo with saturation, hue, curve, etc, all the pics are getting edited with the intended effect, not just 1. I have tried locking the layers, but its still linking to each one. The layer on the bottom isn't getting changed, but I don't think I should have to rotate each pic and layer to the bottom to be able to edit it. A few of my other tools are also acting up. I'm trying to do class work, and this is not getting me closer to taking my exams if the tools can't do what I need them to do. Anyone else having this problem?? Any ideas??

Working on CS6. I tried the adjustment layer, but I was importing the graphics using file\place commands. It wouldn't work no matter what we tried. So, I used the mini bridge and dragged them into the main graphic, and then did the adj layers and it worked. Another misbehaving command is when I'm using the quick select tool, I inverse the selection, and try to delete the background to transparent. When I tried the del command, it comes up as a fill dialog box with foreground, or background colors-no transparent, and it used to work, simply using the del command. As far as I know, I think the other commands are working as they should... I guess time will tell if they are. Do you still need a screenshot the of screen for the del error? I have a windows pc with CS5 at home that I have used for 3 years, so this jump to CS6 on a mac is a little different than what I'm used to...
Thanks for all your help.
Jamie

Similar Messages

Duplicating multiple sets of seperately linked layers results in all layers being linked together

This has been an issue for a while now, I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered. (maybe in cs6? we are still using cs5)
For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
Does anybody know of a solution? Maybe a script of some kind?

Maybe a script of some kind?
If you are looking for a Script maybe you should ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting

How do I addmy I tunes songs to my I phone if I have two different I tune accounts? Ive heard of people accidentally deleting all of their phone info when trying to do so, so I'm trying to avoid that!

How do I addmy I tunes songs to my I phone if I have two different I tune accounts? Ive heard of people accidentally deleting all of their phone info when trying to do so, so I'm trying to avoid that!

Rick Fernandez1 wrote:
I don't know why the songs aren't matching.
Just because a song does not "match" does not mean it won't be available in the cloud. Non-purchased tracks that are not matched will be uploaded to the cloud. You need to enable the iCloud Status. Pull down View > View Options and select "iCloud Status" then close the small window.
Rick Fernandez1 wrote:
iTunes only shows one kind of cloud icon next to songs, viz, a cloud with a down arrow set in a grey background. There are no cloud icons next to any other songs. I'm not sure what their status is consequently.
Unless you've deleted the track from the iTunes library you shouldn't see any cloud icons next to songs that have been successfully processed. Did you delete any tracks?
Rick Fernandez1 wrote:
What is really want is to match and also be able to keep the songs that don't match. Are these mutually exclusive goals? If so, then I don't want iTunes Match after all.
You do. The tracks in the iTunes library are not touched or modified in any way. They stay right where they are unless you delete them.
Rick Fernandez1 wrote:
Also, I thought Match was supposed to convert the songs that are matched to 256 kbps. This has not at all happened. I don't see any that were upconverted at all.
This does not happen automagically. You must delete the track from the iTunes library and download the "matched" track. But upgrading only works for tracks that have been "matched." Tracks that have been "uploaded" are exactly the same as what was on your HDD. See my instructions above to enable the iCloud Status column.

How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library.

How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library. Same with the artist.

Welcome to the  Discussion Forums
... I assumed that if I played the 1st track, it would continue to play the rest of the album (as iTunes does on my Macs and PCs),...
You assumed correctly, and it should continue to play the rest of the album in order. Does this happen to all your albums. Have you tried restarting the tv.

When I get a message it only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

when I get a message my iphone 4s only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt). If that doesn't work, perform a Restore via iTunes (from backup).

Themes are not present when trying to make a card.

Themes are not present when trying to make a card. ??

Greetings,
You need to reinstall iPhoto.
Questions:
What version of iPhoto are you running (iPhoto > About iPhoto)?
What version of the Mac OS are you running (Apple > About this Mac)?
General steps:
Remove the following files to the trash:
Macintosh HD > Library > Application Support > iPhoto (if present)
Macintosh HD > Library > Application Support > NetServices (if present)
Macintosh HD > Library > Receipts > iPhoto (anything with iPhoto in the name)
Macintosh HD > Applications > iPhoto
Insert the iLife install disk you have or the Applications disk that came with your computer and reinstall iPhoto: http://support.apple.com/kb/HT2604
Once installation is complete go to the Apple > Software update and repeat this until no additional updates are offered.
Hope that helps.

All applications are not responding when wake from sleep.

All applications are not responding when Macbook pro wake from sleep,
the keyboard and touch pad are okay.
Why?
Thanks a lot.

I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
If it does not, that means one of those services that was disabled, is causing the issue.
If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware.
Here are the steps to disable non-critical services:
Windows + Q to bring up Search
Type 'msconfig' and press Enter
Click the Services Tab
Check the Hide All Microsoft Services box
Click the Disable All button
Click Apply and Restart
Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
Let me know the results when you get a chance, please

Java error when trying to edit file - access denied

We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanks

dangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error Message received when trying to edit page

I have received this following message when trying to edit a site page in SharePoint or in SharePoint designer. I haven't ever seen this error message before and am not really sure what the issue is. I am not the owner of this
particular site but merely an owner of a specific page on this site so I am limited in my ability to troubleshoot but the actual owner is stuck on what the potential issue is and how to resolve this. I manage and own three seperate sites myself and have never
seen this issue so I am trying to assist in any way I can. Any ideas whats the issue?
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(),response filters, HttpModules,
or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.

Hi,
We need more information of the issue page. As suggested by Mokhtar, you could check if the issue is related to permission.
The issue might also occurs to the page which is developed based Ajax registration. Then it might be caused by AAM configuration.
And you could also refer to the link below if the issue is related to SSRS:
http://blogs.msdn.com/b/sowmyancs/archive/2012/07/10/ssrs-javascript-error-sharepoint-sql-reporting-services.aspx
Regards,
Rebecca Tu
TechNet Community Support

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Error when trying to edit post

This may be an anomaly, but I received this message when trying to edit a post:
Error
An error has occurred. We apologize for the inconvenience.
Useful links:
Forum Home -- browse the forums here.
Search Forums -- visit the search page to query all forum content.
The message repeated upon re-trys.
Barry
Message was edited by: Barry Hemphill

Hi Barry
Me as well, yesterday, to the point time was up
& not able to edit ,as if 15 mins up but it had been
well under 4-5 mins, every retry same results.
Has not happened today , but this only my 4th post.
Eme
Message was edited by: Eme~~ my post count looks off,
but not I'am not tracking anymore.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.

Error when trying to edit page

I get the following error when trying to edit an asp page
"The operation could not be performed because a problem
occurred while attempting to connect to the server. Please check
your internet connection and try again. For more details, please
visit the Incontext Editing Support Center."
If I try and duplicate the page I get:
"The page you are trying to edit or duplicate was loaded with
and error from the server.
Solution: Contact your web developer to correct the problem.
For more details, please visit the Incontext Editing Support
Center."

There is a test page here:
http://www.markthomasinfo.com/testice.asp.
I can't edit this file and get the errors I put in my first post in
this thread when I try and do so. I get the same errors with any
ASP file I try and edit.
I can however edit this simple html file successfully:
http://www.markthomasinfo.com/testincontext.html
The ASP page is very simple, here's the code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:ice="
http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>Untitled Document</title>
<script src="includes/ice/ice.js"
type="text/javascript"></script>
</head>
<body>
<p>TEST ASP FILE</p>
<div ice:editable="*">Content for new Editable Region
goes here</div>
</body>
</html>

When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

All layers are linking together when trying to edit just one....

Similar Messages

Maybe you are looking for