Allocations are differing in table T811F and 4KE3 transaction(urgent)

Hi experts,
we have come across an incident where the allocations in table T811F and transaction 4ke3 are differing alot?can any one tell why it is so? the tracing factor tab of 4ke3 is showing 000 for some profit centers where as it is showing 100 in T811F table the sender and receiever rules are 1 and 4 respectively in 4ke3.due points will be given.
Thanks in advance.
Moses.

Hi
anyupdate on this .i appriciate your inputs on this and due points will be assigned.
regards,
moses.

Similar Messages

  • In service purchase order, value are different in status tab and when doing service enrty sheet

    please check the value 170360    4080  both are different  why?

    Hi tekhnath,
    Well according to the screen that you posted, the status of a PO can be seen under the status tab in the header of the PO, the value that you see in the service entry sheet is the price of the ordered value, like wise if my net price is 200 and the quantity i am booking is 2 then the value field in the service entry sheet would show 4000. The pending quantity can be seen in the report me2n against the PO number.
    here in your figures 170360 is the remaining order value and 4080 is the value for which you have booked the service entry sheet for.
    Regards,
    Sagnik

  • I have an ipad 1 and an iphone 4s, how do I manage these in iTunes given that they are different ios versions (5 and 6)?

    My iPhone 4s is on iOS 6 and that is fine (with various known issues of course). My iPad is using iOS 5 and does not support iOS 6, and here lies the problem.
    iTunes suggests updates to my Apps, some of which become iOS 6 only making them unusable on my iPad. I can't transfer these iOS 5 compatible versions of the Apps to iTunes because they are seen as older, and if I remove them from the iPad I can no loinger install them as I can't run iOS 6 on the iPad.
    This is madness and very poor design by Apple whereby their closed management tools (iTunes) cannot actually manage a situation they have crerated themselves.
    If I could at least identify which Apps in my library where iOS 6 only, I could feasibly try to locate these in my Time Machine backups and keep them manually backed up for my iPad, but Apple haven't even though tof allowing me to do this. Or perhaps they have in a hiddne feature somehow!!
    Does anyone know if there is a way to identify Apps that only support iOS 6?
    Even if this required a terminal search for a string within .plist files or something.
    Help, my iPad is losing functionality by the day...
    Thanks
    Chris

    And I can't find this "on this page" item people are talking about.

  • SWITCHOVER_STATUS value are different for Oracle 11gR1 and 11gR2

    Hi All,
    I would like to know why is there a difference in the SQL output when run on a 11gR1 and 11gR2 Primary database in a DataGuard configuration.
    On a 11gR1 Primary database
    Open an SQL Session on the Primary database and run the SQL statement
    SQL> select switchover_status from v$database;
    To Standby
    Now open a second SQL Session
    Run the above SQL statement
    SQL> select switchover_status from v$database;
    Sessions Active
    Now, when I do the same on a 11gR2 Primary database here is the result
    On a 11gR2 Primary database
    Open an SQL Session on the Primary database and run the SQL statement
    SQL> select switchover_status from v$database;
    To Standby
    Now open a second SQL Session
    Run the above SQL statement
    SQL> select switchover_status from v$database;
    To Standby
    Is this a bug in 11gR2 ? Is there a patch/fix available ?
    Oracle 11gR2 version 11.2.0.1.0
    TIA,
    Sudhir

    Hello Loic,
    The result on the Standby Database is "Not Allowed". This is because there is no alternative Standby Available.
    I have some scripts which does the switchover based on the Database status. As per Oracle 11gR2 DataGuard Admin docs.
    Cut pasted for Oracle DataGuard Admin docs.
    Step 1 Verify that the primary database can be switched to the standby role.
    SQL> SELECT SWITCHOVER_STATUS FROM V$DATABASE;
    SWITCHOVER_STATUS
    TO STANDBY
    1 row selected
    Note: The WITH SESSION SHUTDOWN clause can be omitted from
    the switchover statement if the query performed in the previous step
    returned a value of TO STANDBY.
    When I use SQL statement "ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY;" and if there are Active SQL sessions then I get the error
    ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY *
    ORA-01093: ALTER DATABASE CLOSE only permitted with no sessions connected
    Thanks,
    Sudhir

  • REUSE_ALV_GRID_DISPLAY - the internal table are different showed table

    Hello
    I'm using  REUSE_ALV_GRID_DISPLAY. The internal table-filed X = 1000. The same field on ALV list is showed as 1000 000.
    The field is :
    SORTAMOUNT          CURR     12     decimal 5     
    Following the code (i not used particular option):
      REFRESH lt_fieldcat.
      CLEAR   lt_fieldcat.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
         EXPORTING
           i_program_name     =  'ZFI_FLASH_FILES'
           i_internal_tabname =   'ZFI_FLASH_FILES'
         i_inclname         = sy-repid
           i_inclname         = 'ZFI_FLASH_FILES'
          i_structure_name   = 'ZFI_FLASH_FILES'
         CHANGING
           ct_fieldcat        = lt_fieldcat
         EXCEPTIONS
           OTHERS             = 1.
      IF sy-subrc NE 0.
        REFRESH lt_fieldcat.
        CLEAR   lt_fieldcat.
      ENDIF.
      LOOP AT lt_fieldcat INTO ls_slis_fieldcat.
        CASE ls_slis_fieldcat-fieldname.
          WHEN 'UNITCODE'.
            MOVE 'Code IC' TO ls_slis_fieldcat-seltext_s.
          WHEN 'ACCCODE'.
            MOVE 'Code Account' TO ls_slis_fieldcat-seltext_s.
          WHEN 'DIM1CODE'.
            MOVE 'Brand-code' TO ls_slis_fieldcat-seltext_s.
          WHEN 'DIM2CODE'.
            MOVE 'Product-type-code' TO ls_slis_fieldcat-seltext_s.
          WHEN 'DIM3CODE'.
            MOVE 'Pays FH' TO ls_slis_fieldcat-seltext_s.
          WHEN 'CURRCCODE'.
            MOVE 'Devise' TO ls_slis_fieldcat-seltext_s.
          WHEN 'SORTAMOUNT'.
            MOVE 'Cumul' TO ls_slis_fieldcat-seltext_s.
            MOVE '5' TO ls_slis_fieldcat-decimals_out.        "@6I
        ENDCASE.
        MODIFY lt_fieldcat FROM ls_slis_fieldcat.
      ENDLOOP.
      alv_layout-colwidth_optimize = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
               i_callback_program = 'ZFI_FLASH_FILES'
              i_grid_title       = 'Fichier Flash'
               i_structure_name   =   'ZFI_FLASH_FILES'
               is_layout          = alv_layout
              i_callback_user_command = 'USER_COMM'
               it_fieldcat        = lt_fieldcat
              i_default          = 'X'
              i_save             = 'A'
              it_sort            = i_sort
               i_save             = 'A'
               is_variant         = ls_variant
            it_events          = event_tb
               is_print           = alv_print
          TABLES
               t_outtab           =  t_datatab
          EXCEPTIONS
               program_error      = 1
               OTHERS             = 2.
    Any idea ?

    Solved by refreshing with sync transaction.
    Thank you
    regards
    Roberto

  • POP capabilities are gotten in authorization mode, and not transaction mode

    I am using Javamail in an email client that requires UIDL support for POP3 servers. There are some servers that return the UIDL capability only in transaction mode, not in authorization mode (eg. pop.aol.com). I am unable to connect to such servers once I upgraded to javamail 1.4.4, since it is now looking at the capabilities before executing the UIDL command. However, it gets the capabilities in authorization mode, and servers like the one above do not send the UIDL capability in this mode. If the capabilities were refreshed in transaction mode (once login was done), UIDL would be returned. This looks like a bug. Is there a workaround for this?

    This definitely looks like a bug in AOL's server, please report it to them.
    RFC 2449 says:
       A capability description MUST document in which states the capability
       is announced, and in which states the commands are valid.
       Capabilities available in the AUTHORIZATION state MUST be announced
       in both states.
       If a capability is announced in both states, but the argument might
       differ after authentication, this possibility MUST be stated in the
       capability description.
       (These requirements allow a client to issue only one CAPA command if
       it does not use any TRANSACTION-only capabilities, or any
       capabilities whose values may differ after authentication.)
    6.8.  UIDL capability
       CAPA tag:
           UIDL
       Announced states / possible differences:
           both / noThis says to me that the UIDL capability, if supported, must be announced in both states
    and must not change between states.
    You can set the session property mail.pop3.disablecapa to "true" to disable the use of the CAPA
    command, which will cause it to assume UIDL is supported.

  • Staging area different from target

    I am using oracle 10g as target database. I want to upload a flat data file into oracle table.
    I uploaded sucessfully using LKM Oracle (SQL Loader) in Interface. In this case i am using oracle database as a staging area. So all load transferred to my database at the timing of processing.
    I want to create staging area at my file server. So please help me out to resolve this problem.

    A staging area must accept SQL syntax.
    A File server won't accept SQL syntax.
    So if you speak about Physical Server where you got your file and if there is a RDBMS installed in maybe but else I don't really know how you can...
    You can specify another data server for your staging area or use the SUNOPSIS_MEMORY_ENGINE which use the cache I think but it's not optimized I think...
    For this in the Definition Tab of your Interface choose Staging Area different from the Target and then select in the list box SUNOPSIS_MEMORY_ENGINE.

  • Table controls and step loops

    what are the differances between table controls and step loops?

    Hi
    It's only graphic diff. managed by diff. ways (of course):
    in steploop there isn't a table control so in PBO and PAI it has only the stataments LOOP/ENDLOOP or LOOP AT ITAB/ENDLOOP.
    The step loop is way older than table control to display the data of a table.
    check this
    Re: step loops, table controls
    -charitha.

  • File SIZES are Different ?

    Hi Experts,
    I have implemented ESR By pass Scenario.
    The problem is we are getting the file sizes are differently in Source folder and Target folder
    How can we resolve this issue
    Please Guide Me
    Thanks and Regards,
    Ravi Teja.

    Refer to question no. 2 under the below wiki and see if that configuration helps.
    Sender File Adapter Frequently Asked Questions - Process Integration - SCN Wiki

  • Trying to use 2 different Dimension tables and make a hierarchy on some columns which are split into these dimensions .. how do I do that

    Trying to use 2 different Dimension tables and make a hierarchy on some columns which are split into these dimensions .. how do I do that

    If you need to make a hierarchy in an Attribute view you need to have all relevant fields/columns in the same Dimension table..

  • Number of records are different in database table and select statement

    Hi All,
    i need to fetch data from table BSID for the customer 0010000145
    if i am writing the code like -
        SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
               FROM bsid
               INTO TABLE it_bsid
               FOR ALL ENTRIES IN it_kna1
               WHERE kunnr = it_kna1-kunnr
               and bukrs = pa_bukrs.
    no. of records are 130 in the internal table it_bsid
    and actual records are 200
    but when i am hardcoding the customer no.
    i am getting the exact records
       SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
              FROM bsid
              INTO TABLE it_bsid
              FOR ALL ENTRIES IN it_kna1
              WHERE bukrs = pa_bukrs
                AND kunnr = '0010000145'.
    records in internal table = records in the database = 200.
    how it is possible.
    why the first code is not giving the correct no. of records.
    please reply asap.
    thanks in advance,
    madhu

    Madhu,
    You need to use the conversion routine...before u pass KUNNUR.
    CONVERSION_EXIT_ALPHA_RANGE_I
    CONVERSION_EXIT_ALPHA_RANGE_O
    Hope this helps..
    Chandra.

  • Why Base and interface tables mandatory column are differant ?

    Hi guys , i have load supplier into AP(ap_suppliers) through Interface table(ap_suppliers_int) but my confusion is that ap_suppliers have 8 mandatory columns but it's interface ap_suppliers_int have only 2 mandatory column.why?and also with these 2 columns record is successfully loaded into base so how it's get other mandatory columns value in base table or leave it .
    Regards,
    Shakeel khan
    Edited by: shakeel khan on Mar 14, 2010 8:32 AM

    Hi,
    Refer to Oracle Payables Reference guide, section "Understanding the Suppliers Open Interface Tables"
    Here is an extract:
    The intent of the Supplier Open Interface Import is to emulate the entry of Suppliers,
    Sites, and Contacts through the Supplier Entry form as closely as possible. As such,
    there are many values that will be automatically defaulted if not provided by the user.
    These defaults for Suppliers can come from AP_SYSTEM_PARAMETERS_ALL,
    FINANCIALS_SYSTEM_PARAMS_ALL, PO_SYSTEM_PARAMETERS.ALL,
    RCV_PARAMETERS, or hard-coded values. As these source tables are organized by
    operating unit and the supplier data is not, the Suppliers Open Interface Import
    program assigns a default organization to each run based on the responsibility of the
    user initiating the concurrent request. This is necessary in order to determine which
    default values to assign to supplier records.
    The defaults for Supplier Sites generally come from the Supplier record. However, in
    certain cases due to multiple organizations considerations, it is necessary to default
    values for Supplier Sites from AP_SYSTEM_PARAMETERS_ALL or
    FINANCIALS_SYSTEM_PARAMS_ALL.
    J.

  • Accessing tables from different schema in CDS and AMDP

    Hi All,
    We are working on a HANA system which has several schema replicated from SAP R/3/Non SAP systems. We have BW 7.4 SP9 deployed on the same system and accessing the HANA views using latest BW virtual objects such as Open ODS , Composite providers etc.
    We are also using the BW system for few ABAP based data processing developments. We are currently accessing HANA views in ABAP programs by creating dictionary views based on external HANA views.
    We would like to however use recent possibilities of CDS and AMDP for better life cycle management of ABAP based solutions. The open SAP course on this subject was of very good help. Thanks a lot "open SAP team" for that. I would however have few open questions,
    As I understand AMDP gives us full flexibility of writing sql procedures within ABAP development environment, but can we access tables from different schema into AMDP code. If yes, then sample code would help.
    If the answer of first question is yes, then how do we manage transports between development and production systems where the schema names would be different. Currently in open HANA developments, such transport is manged using Schema mapping.
    Can I also use different schema tables in CDS views.
    We are updating few tables in ABAP dictionary after applying processing logic in ABAP program as detailed in step 1. With the new approach using AMDP, can we directly update database schema tables which will give us an optimization advantage.
    New ABAP HANA program interfaces are quite promising and we would like to use them to optimize many data intensive applications.
    Thanks & Regards,
    Anil

    Hi Anil,
    I can only answer 1. and 2. (and would be interested into 3. as well):
    1.
    Yes you can access tables from a different schema and also HANA views. In this case no 'using' is needed.
    Examples:
        RESULT = SELECT
        FROM
              "SAP_ECC"."T441V" AS t,
              "_SYS_BIC"."tmp.package/AFPO" AS a.
        WHERE ...
    2. In this case, if you need schema mapping: You could use HANA (projection) views which just forward to a different schema, also see example.
    Best regards,
    Christoph

  • How to handle 3 different fact tables and measures within a DAX query?

    I am writing a DAX query in DAX studio in Excel against a tabular model that has 4 different Fact tables, but they share the same dimensions. (There's some long story I can't get into here, but unfortunately this is the structure) I want to
    include measures from the 4 fact tables, summarize by the dimensions in a single query output that can be used for a pivot table.  So far I have something like this:
     EVALUATE
    FILTER
        SUMMARIZE
            FactTable1,
            DimensionTable1[Value],        DimensionTable2[Value],
            DimensionTable3[Value],
            Dimensiontable4[Value],
            'dimDateTime'[Month PST],
            DimDateTIme[FiscalYear PST],
            "Measure Score",
            FactTable1[Measure 1],
            "Measure Score 2",
            FactTable1[Measure 2],
        ,Company[CompanyName]="Company ABC" 
    What I want to do is summarize the 3 fact tables by the same dimensions, but I am not sure how to do that within a DAX query.  I am getting an error if I try to include another table statement in the original SUMMARIZE function, even though the FACTS
    do share the same dimension.  Is there an easy way to do this?

    You can use ADDCOLUMNS to add the data from other tables, but you need to use within the SUMMARIZE the fact table that determines the cardinality of the output. If you are not sure (e.g. you project cost and revenues from two fact tables by month and there
    could me months with cost and no revenues, but also months with revenues and no costs), then you should use CROSSJOIN and then FILTER.
    You query might be written as (please note CALCULATETABLE instead of FILTER to improve performance):
    EVALUATE
    CALCULATETABLE (
        ADDCOLUMNS (
            SUMMARIZE (
                FactTable1,
                DimensionTable1[Value],
                DimensionTable2[Value],
                DimensionTable3[Value],
                Dimensiontable4[Value],
                'dimDateTime'[Month PST],
                DimDateTIme[FiscalYear PST]
            "Measure Score", FactTable1[Measure 1],
            "Measure Score 2", FactTable1[Measure 2]
        Company[CompanyName] = "Company ABC"
    Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

  • How table GLT0 work? (Different value between GLT0 and BSAS)

    Anyone know about how the table GLT0 work?
    After checked in sapenote sapnote 100273 which said "For an FI posting (for example, with Transaction FB01),
    the balances resulting from the posting are updated twice in the G/L Account Monthly
    Debits and Credits (table GLT0)."
    So, Any change amount value of items in accounting doc. This problem should to update, correct?
    For any change of amount value in item of accounting doc and currencies is change.
    Need to reupdate this  table with new currencies? or any logic
    Now, I found a problem is "Account balance" value in currency group (USD) in transaction FS10
    and total sum of "USD Amount" in transaction code FBL3 (If click to sum by currency)
    are different for 17.79 USD.
    I tried to get a logic of this 2 transaction code and found detail as below:
    FS10 : Get data from table GLT0 and for group currency report. Program select data
    from field KSLVT and KSLXX to display in report.
    FBL3 : Get all data until selected period in table BSAS and sum total amount from field BSAS-DMBE2
    (Amount of USD Currency)
    Actually, This 2 report should to have the same account balance.
    So, My question is
    1. When the table (GLT0) update?
    2. Can have a problem with the data in GLT0 (field KSLVT and KSLXX t)
    and sum of amount USD curency BSAS-DMBE2 are differenct?
    If can have, how is occur?
    Many thank in advance.

    Hi,
    Did you find any relationship between the data (sql data and Essbase)?
    While you are loading fresh data, there is no discrepancy.
    You find discrepancy at the time of incremental loading.
    It might be possible in incremental loading data can be added to already existing value in dimension.
    In that case you will find your Essbase data is 2times or 3 times more than base data (sql).
    Then check there might be some setting.
    Thanks
    Dhanjit G

Maybe you are looking for